The long-term corrosion behavior of FeCrAl(Si) alloys after breakaway oxidation at 600?C

被引:12
|
作者
Eklund, J. [1 ]
Persdotter, A. [1 ]
Ssenteza, V. [1 ]
Jonsson, T. [1 ]
机构
[1] Chalmers Univ Technol, Dept Chem & Chem Engn, Energy & Mat, S-41296 Gothenburg, Sweden
关键词
FeCrAl; Silicon; SEM; EBSD; High temperature corrosion; Internal oxidation; HIGH-TEMPERATURE CORROSION; KCL-INDUCED CORROSION; AUSTENITIC STAINLESS-STEEL; CR-NI ALLOYS; WATER-VAPOR; FE-CR; INITIAL-STAGES; SANICRO; 28; SILICON; DRY;
D O I
10.1016/j.corsci.2023.111155
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The long-term corrosion behavior of three FeCrAl(Si) alloys has been investigated in two environments (K2CO3 and KCl+H2O) at 600 degrees C. The FeCrAl alloy experienced breakaway oxidation in both environments but displayed a higher corrosion rate in KCl+H2O. The FeCrAlSi alloys retained the primary protection in the presence of K2CO3 but underwent breakaway oxidation in the presence of KCl+H2O. The FeCrAlSi alloys displayed considerably reduced corrosion rates, suggested to be an effect of the prevention of internal oxidation and the formation of non-continuous corundum-type oxide dispersed within the inward-growing scale.
引用
收藏
页数:12
相关论文
共 50 条
  • [31] Long-term isothermal oxidation behavior of two industrial polycrystalline nickel base alloys in air at 700 °C – Evaluation of intergranular oxidation distribution and kinetic
    Malacarne, R.
    Mathieu, S.
    Aranda, L.
    Vilasi, M.
    Desgranges, C.
    Knittel, S.
    Corrosion Science, 2021, 188
  • [32] Exploring the creep and oxidation behaviors of four types of FeCrAl alloys through small punch test at 600 °C: Experiments and simulations
    Jiang, Xiaowei
    Bai, Jiawei
    Guo, Jinquan
    Lai, Huan Sheng
    Ma, Xianfeng
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 27 : 733 - 756
  • [33] Bi-modal trend in the long-term corrosion of aluminium alloys
    Melchers, Robert E.
    CORROSION SCIENCE, 2014, 82 : 239 - 247
  • [35] LONG-TERM OXIDATION BEHAVIOR OF VARIOUS CHROMIA-FORMIING ALLOYS: EFFECT OF THERMAL CYCLE LENGTH
    Deodeshmukh, Vinay P.
    Srivastava, S. Krishna
    PROCEEDINGS OF ASME TURBO EXPO 2009, VOL 4, 2009, : 885 - 892
  • [36] Influence of Y-addition on the long-term oxidation behavior of high Nb containing TiAl alloys
    State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China
    Hangkong Cailiao Xuebao, 2006, 6 (42-45):
  • [37] A Comparison of Static and Cyclic Long-Term Oxidation of Two Nb-Cr-Mo-Si-B Alloys
    Thomas, Kathryn S.
    Varma, Shailendra K.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (03): : 1124 - 1135
  • [38] A Comparison of Static and Cyclic Long-Term Oxidation of Two Nb-Cr-Mo-Si-B Alloys
    Kathryn S. Thomas
    Shailendra K. Varma
    Metallurgical and Materials Transactions A, 2014, 45 : 1124 - 1135
  • [39] Long-term isothermal oxidation behavior of two industrial polycrystalline nickel base alloys in air at 700 °C-Evaluation of intergranular oxidation distribution and kinetic
    Malacarne, R.
    Mathieu, S.
    Aranda, L.
    Vilasi, M.
    Desgranges, C.
    Knittel, S.
    CORROSION SCIENCE, 2021, 188
  • [40] DEVELOPMENT AND EVALUATION OF NANOSTRUCTURED COATINGS FOR LONG-TERM CORROSION AND OXIDATION PERFORMANCE
    Govindaraju, Madhavrao
    Cheruvu, N. Sastry
    Natesan, Ken
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2010, VOL 9, 2010, : 231 - 237