Heat transfer enhancement of helical tubes during pool boiling

被引：1

作者：

Tsai, Mu -An ^{[1
]}

Chien, Liang-Han ^{[1
,2
]}

Hsu, Chien-Yeh ^{[1
]}

机构：

[1] Natl Taipei Univ Technol, Dept Energy & Refrigerating Air Conditioning Engn, 1,Sec 3,Chung Hsiao E Rd, Taipei 106, Taiwan

[2] Natl Taipei Univ Technol, Res Ctr Energy Conservat New Generat Residential C, Taipei 106, Taiwan

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2023年 / 211卷

关键词：

Helical tubes; Pool boiling; Heat transfer coefficient; Visualization; DISTILLED WATER; BUNDLE; PLAIN; FLOW; FLUID;

D O I：

10.1016/j.ijheatmasstransfer.2023.124269

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This research utilizes experimental measures to investigate the heat transfer mechanism of helical tubes during saturated pool boiling. Experiments were carried out using R-134a and R-513A as working fluids, with saturation temperatures of 4.4 degrees C and 15 degrees C and heat fluxes ranging from 5 to 50 kW/ m2. The helical tube surface was heated by hot water with ascending heat flux. The helical test tubes used in this study are annealed smooth copper tubes with an outer diameter of 6.35 mm, tube thickness of 0.7 mm, coil diameter of 58.85 mm, number of turns of 3.5, and tube pitches ranging from 7 to 21 mm. Experimental results show that the tube bundle effect also exists in helical tubes as the boiling heat transfer coefficient obtained from helical tubes is significantly higher than that of single straight tubes predicted by the Cooper correlation. Furthermore, the boiling heat transfer coefficients obtained are greatly influenced by the tube pitch and show a tendency to increase with the decrease in tube pitch. In addition, larger and faster-moving bubbles are observed near the upper part of the helical tube due to agitations generated from the bottom part.(c) 2023 Elsevier Ltd. All rights reserved.

引用

页数：12

共 50 条

[41] Pool boiling heat transfer enhancement in binary mixtures by surfactant additives
State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an 710049, China
不详
[J]. Kung Cheng Je Wu Li Hsueh Pao, 2008, 10 (1707-1710):
[42] Scalable macroscale wettability patterns for pool boiling heat transfer enhancement
Ajinkya Sarode
Rishi Raj
Atul Bhargav
[J]. Heat and Mass Transfer, 2020, 56 : 989 - 1000
[43] Enhancement of heat transfer at pool boiling on surfaces with silicon oxide nanowires
Chinnov, E. A.
Shatskiy, E. N.
Khmel, S. Ya
Baranov, E. A.
Zamchiy, A. O.
Semionov, V. V.
Kabov, O. A.
[J]. JOINT 12TH INTERNATIONAL CONFERENCE: TWO-PHASE SYSTEMS FOR SPACE AND GROUND APPLICATIONS AND 2ND INTERNATIONAL SCHOOL OF YOUNG SCIENTISTS INTERFACIAL PHENOMENA AND HEAT TRANSFER, 2017, 925
[44] Pool boiling review: Part II-Heat transfer enhancement
Mahmoud, M. M.
Karayiannis, T. G.
[J]. THERMAL SCIENCE AND ENGINEERING PROGRESS, 2021, 25
[45] Enhancement of pool boiling heat transfer by surface micro-structuring
Moita, A. S.
Teodori, E.
Moreira, A. L. N.
[J]. 6TH EUROPEAN THERMAL SCIENCES CONFERENCE (EUROTHERM 2012), 2012, 395
[46] Heat transfer enhancement studies in pool boiling using hybrid nanofluids
Reddy, Yagnem Anil
Venkatachalapathy, S.
[J]. THERMOCHIMICA ACTA, 2019, 672 : 93 - 100
[47] Enhancement of pool boiling heat transfer coefficients using carbon nanotubes
Park, Ki-Jung
Jung, Dongsoo
[J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2007, 21 (02) : 303 - 310
[48] Pool boiling heat transfer enhancement by bi-conductive surfaces
Deng, Zilong
Liu, Xiangdong
Wu, Suchen
Zhang, Chengbin
[J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2021, 167
[49] Enhancement of pool boiling heat transfer coefficients using carbon nanotubes
Ki-Jung Park
Dongsoo Jung
[J]. Journal of Mechanical Science and Technology, 2007, 21 : 303 - 310
[50] HEAT TRANSFER ENHANCEMENT AND SURFACE THERMOSTABILIZATION FOR POOL BOILING ON POROUS STRUCTURES
Wojcik, Tadeusz Michal
[J]. EFM11 - EXPERIMENTAL FLUID MECHANICS 2011, 2012, 25

← 1 2 3 4 5 →