Demonstration of ITER Real-Time Framework with application of PF coil control in KSTAR

ITER Real-Time Framework (RTF) is a middleware for developing fast real-time control applications such as plasma control system (PCS). In this framework, applications are built by creating and assembling Function Blocks (FBs) as atomic components of the application. The RTF can easily configure the application to be operated with multi-thread, multi-process, or multi-node processing under real-time mode. In this paper, we demonstrated capability of the RTF on the Poloidal Field (PF) coil Magnetic Power Supply (MPS) system of KSTAR. First, we fully implemented the KSTAR PF coil control logic from the KSTAR PCS into an independent RTF application. By configuring the real-time mode and multi-thread processing, 11 PF coils can be simultaneously controlled with a 20 KHz execution cycle. Second, we applied a built-in exception handler in the RTF to implementing protection from specified off-normal events such as PF Power Supply Fault (PSF) and PF OverCurrent Fault (OCF). Third, we integrated the standard real-time network interfaces of the KSTAR, the Reflective Memory (RFM) network, with the RTF application. Finally, we made a shot automation interface in order to run the RTF application according to the KSTAR shot sequence stages. This interface also has a snapshot functionality to store and load all experimental parameters for each shot number. We evaluated the effectiveness of the RTF application through a single PF MPS test connected with a 40 mH dummy load coil.