Hydrogen diffusion kinetics in dual-phase (DP 980) steel: The role of pre-strain and tensile stress

被引:8
|
作者
Reddy, Kallem Shekar [1 ]
Govindaraj, Yoganandan [1 ,2 ]
Neelakantan, Lakshman [1 ]
机构
[1] Indian Inst Technol Madras chennai, Dept Met & Mat Engn, Corros Engn & Mat Electrochem Lab, Chennai 600036, India
[2] Hokkaido Univ, Div Mat Sci & Engn, Sapporo 0608628, Japan
关键词
Dual-phase steel; Hydrogen permeation; Pre-strain; In-situ tensile stress; Hydrogen trapping; PLASTIC-DEFORMATION; PIPELINE STEEL; MECHANICAL-PROPERTIES; DISLOCATION DENSITY; MARTENSITIC STEEL; PERMEATION; EMBRITTLEMENT; BEHAVIOR; TRANSPORT; MICROSTRUCTURE;
D O I
10.1016/j.electacta.2022.141727
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
The current study investigates the influence of pre-strain (un-strained, 3 %, and 6 % engineering strain) and in-situ tensile stress (50 %, 110 %, and 125 % of the yield stress (YS)) on the hydrogen diffusion and trapping behaviour in DP 980 steel. Electrochemical hydrogen permeation tests were conducted using a custom-built Devanathan-Stachurski (DS) cell integrated with a horizontal tensometer. The results showed that the value of apparent diffusion coefficient (Dapp) decreased from 5.4 +/- 0.1 to 3.8 +/- 0.029 x 10- 7 cm2 s-1, while trap density (NT) and sub-surface hydrogen concentration (Capp) increased from 1.08 +/- 0.01 to 1.58 +/- 0.012 x 1021 cm-3, 2.70 +/- 0.13 to 3.27 +/- 0.10 x 10-4 mol H cm-3, respectively for unstrained and 6 % pre-strain conditions. This is due to increased dislocation density in ferrite and martensite. Hydrogen permeation tests under tensile stress (in-situ) revealed that the applied elastic stress of 50 % of YS showed a slight increase in Dapp and a decrease in NT values. This is due to an increase in the interstitial space between the atoms at applied elastic load favouring hydrogen diffusion. The plastic tensile stress of 110 % of YS showed the highest value of steady-state permeation current density iss (169 +/- 10.6 mu A cm-2). It could be due to an expanded lattice of martensite accommodating more hydrogen because of its elastic deformation. The tensile stress of 125 % of YS results in a significant reduction in Dapp (2.86 x 10-7 cm2 s-1) and an increase in Capp (5.52 x 10-4 mol H cm-3) and NT (2.11 x 1021 cm -3) as a result of plastic deformation in ferrite and martensite. The decay transient studies revealed that the applied elastic tensile stress enhances the rate of desorption of diffusible hydrogen, increasing lattice diffusion coefficient DL. The plastic pre-strain and plastic tensile stress resulted in slower desorption, lower DL, and an increase in reversible trap density.
引用
收藏
页数:17
相关论文
共 50 条
  • [1] Hydrogen embrittlement susceptibility of dual-phase DP980 steel and its prevention with the help of coatings
    Dwivedi, Sandeep Kumar
    Vishwakarma, Manish
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2023, 9 (03) : 1225 - 1248
  • [2] The Effect of Microstructure and Pre-strain on the Change in Apparent Young's Modulus of a Dual-Phase Steel
    Kupke, A.
    Hodgson, P. D.
    Weiss, M.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (07) : 3387 - 3398
  • [3] The Effect of Microstructure and Pre-strain on the Change in Apparent Young’s Modulus of a Dual-Phase Steel
    A. Kupke
    P. D. Hodgson
    M. Weiss
    Journal of Materials Engineering and Performance, 2017, 26 : 3387 - 3398
  • [4] Effects of pre-strain and baking parameters on the microstructure and bake-hardening behavior of dual-phase steel
    Chun-fu Kuang
    Shen-gen Zhang
    Jun Li
    Jian Wang
    Hua-fei Liu
    International Journal of Minerals, Metallurgy, and Materials, 2014, 21 : 766 - 771
  • [5] Effects of pre-strain and baking parameters on the microstructure and bake-hardening behavior of dual-phase steel
    Kuang, Chun-fu
    Zhang, Shen-gen
    Li, Jun
    Wang, Jian
    Liu, Hua-fei
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2014, 21 (08) : 766 - 771
  • [6] Effects of pre-strain and baking parameters on the microstructure and bake-hardening behavior of dual-phase steel
    Chun-fu Kuang
    Shen-gen Zhang
    Jun Li
    Jian Wang
    Hua-fei Liu
    International Journal of Minerals,Metallurgy and Materials, 2014, 21 (08) : 766 - 771
  • [7] Influence of stress triaxiality and strain rate on the failure behavior of a dual-phase DP780 steel
    Anderson, D.
    Winkler, S.
    Bardelcik, A.
    Worswick, M. J.
    MATERIALS & DESIGN, 2014, 60 : 198 - 207
  • [8] Tensile and fatigue properties of fiber laser welded high strength low alloy and DP980 dual-phase steel joints
    Xu, W.
    Westerbaan, D.
    Nayak, S. S.
    Chen, D. L.
    Goodwin, F.
    Zhou, Y.
    MATERIALS & DESIGN, 2013, 43 : 373 - 383
  • [9] The bake hardening mechanism of dual-phase silicon steels under high pre-strain
    Badkoobeh, Farzad
    Nouri, Ashkan
    Hassannejad, Hossein
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 770
  • [10] TENSILE STRESS-STRAIN ANALYSIS OF DUAL-PHASE STRUCTURES IN AN MN-CR-SI STEEL
    SAMUEL, FH
    MATERIALS SCIENCE AND ENGINEERING, 1987, 92 : L1 - L4