Three-dimensional numerical study on reducing hypersonic blunt body drag and aeroheating with spike-aerodisk-bleed air channel

Shock drag and aeroheating are major problems faced by hypersonic vehicles. This study proposes a novel three-dimensional model combining spike-aerodisk with a bleed air channel featuring multiple lateral nozzles for drag and aeroheating reduction. The high-temperature and high-pressure air at the stagnation point of the aerodisk is introduced into the channel and ejected laterally through multiple nozzles to modify the flow field structure and reduce drag and aeroheating. In contrast to previous research employing a two-dimensional axisymmetric assumption, our innovation considers the structure of the exit nozzles and the spacing between nozzles. Due to multiple lateral nozzles, the connection thickness between nozzles can lead to asymmetric flow phenomena. Three-dimensional flow field simulation has been employed with the Reynolds-averaged Navier-Stokes (RANS) equations coupled with the shear stress transport (SST) k-omega turbulence model. The effects of the convergence half-angle of the channel inlet, the divergent angle of the nozzle, and the nozzle position on modifying the characteristics of the flow field are studied. Increasing the convergence half-angle of the channel inlet can further push away the reattachment shock, but when it exceeds 60 degrees, the drag reduction performance degrades. Reducing the divergent angle of the nozzle and increasing the number of nozzles can reduce the drag coefficient and the peak value of the Stanton number. However, when the divergent angle is reduced to 10 degrees, the performance of reducing drag and aeroheating is weakened. In the range of research parameters, when the convergence half -angle is 60 degrees, the divergent angle is 15 degrees, and the nozzles are located in the middle of the spike, compared with the plain spike-aerodisk model, the drag coefficient and peak Stanton number of the combined model are further reduced by 17.8 % and 34.8 %, respectively. Our findings confirm that a multi-nozzle can effectively reduce drag and aeroheating while the channel structure is viable in practice.