Preparation of activated carbon from sunflower straw through H3PO4 activation and its application for acid fuchsin dye adsorption

被引:20
|
作者
Zhao, Wen -de [1 ,2 ]
Chen, Li -ping [1 ,2 ]
Jiao, Yan [1 ,2 ]
机构
[1] Inner Mongolia Normal Univ, Coll Chem & Environm Sci, Hohhot 010022, Peoples R China
[2] Inner Mongolia Key Lab Environm Chem, Hohhot 010022, Peoples R China
基金
中国国家自然科学基金;
关键词
Acid fuchsin; Activated carbon; Adsorption; Sunflower straw; Phosphoric acid activation; Impregnation ratio; AQUEOUS-SOLUTION; METHYLENE-BLUE; SURFACE-AREA; WASTE-WATER; BASIC DYE; REMOVAL; KINETICS; EQUILIBRIUM; BIOCHAR; ADSORBENT;
D O I
10.1016/j.wse.2023.02.002
中图分类号
TV21 [水资源调查与水利规划];
学科分类号
081501 ;
摘要
With the development circular economy, the use of agricultural waste to prepare biomass materials to remove pollutants has become a research hotspot. In this study, sunflower straw activated carbon (SSAC) was prepared by the one-step activation method, with sunflower straw (SS) used as the raw material and H3PO4 used as the activator. Four types of SSAC were prepared with impregnation ratios (weight of SS to weight of H3PO4) of 1:1, 1:2, 1:3, and 1:5, corresponding to SSAC1, SSAC2, SSAC3, and SSAC4, respectively. The adsorption process of acid fuchsin (AF) in water using the four types of SSAC was studied. The results showed that the impregnation ratio significantly affected the structure of the materials. The increase in the impregnation ratio increased the specific surface area and pore volume of SSAC and improved the adsorption capacity of AF. However, an impregnation ratio that was too large led to a decrease in specific surface area. SSAC3, with an impregnation ratio of 1:3, had the largest specific surface area (1 794.01 m2/g), and SSAC4, with an impregnation ratio of 1:5, exhibited the smallest microporosity (0.052 7 cm3/g) and the largest pore volume (2.549 cm3/g). The adsorption kinetics of AF using the four types of SSAC agreed with the quasi-second-order adsorption kinetic model. The Langmuir isotherm model was suitable to describe SSAC3 and SSAC4, and the Freundlich isotherm model was appropriate to describe SSAC1 and SSAC2. The result of thermodynamics showed that the adsorption process was spontaneous and endothermic. At 303 K, SSAC4 showed a removal rate of 97.73% for 200-mg/L AF with a maximum adsorption capacity of 2 763.36 mg/g, the highest among the four types of SSAC. This study showed that SAAC prepared by the H3PO4-based one-step activation method is a green and efficient carbon material and has significant application potential for the treatment of dye-containing wastewater. (c) 2023 Hohai University. Production and hosting by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http:// creativecommons.org/licenses/by-nc-nd/4.0/).
引用
收藏
页码:192 / 202
页数:11
相关论文
共 50 条
  • [41] Preparation and Electrochemical Performance of Coconut Shell Activated Carbon Produced by the H3PO4 Activation with Rapid Cooling Method
    Zhang, Ming
    Li, Yonggang
    Si, Hongyu
    Wang, Bing
    Song, Tao
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2017, 12 (08): : 7844 - 7852
  • [42] Preparation and pore structure of jute-based activated carbon fibers by microwave assisted H3PO4 activation
    Institute of Carbon Fiber Applied Technology, Nantong University, 226019, China
    Appl. Mech. Mater., (1428-1432):
  • [43] Preparation and Pore Structure of Jute-based Activated Carbon Fibers by Microwave Assisted H3PO4 Activation
    Liu, Qixia
    Ji, Tao
    He, Lifen
    Gao, Qiang
    FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 184-185 : 1428 - 1432
  • [44] Modification in adsorption characteristics of activated carbon produced by H3PO4 under flowing gases
    Girgis, Badie S.
    Attia, Amina A.
    Fathy, Nady A.
    COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2007, 299 (1-3) : 79 - 87
  • [45] Preparation of Activated Carbons from Walnut Shell by Fast Activation with H3PO4: Inflluence of Fluidization of Particles
    Gao, Xinyuan
    Wu, Long
    Wan, Wenjie
    Xu, Qing
    Li, Zhanyong
    INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING, 2018, 16 (02)
  • [46] Preparation and characterization of activated carbons from waste tea by H3PO4 activation in different atmospheres for oxytetracycline
    Kan, Yujiao
    Yue, Qinyan
    Li, Dong
    Wu, Yuwei
    Gao, Baoyu
    JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 2017, 71 : 494 - 500
  • [47] Preparation and characterization of activated carbons made up from different woods by chemical activation with H3PO4
    Macías-García, A
    Díaz-Díez, MA
    Gómez-Serrano, V
    González, MCF
    SMART MATERIALS AND STRUCTURES, 2003, 12 (06) : N24 - N28
  • [48] Preparation of Novel H3PO4 Mixed Sludge-Sunflower Seeds Husk Biochar and its Application in TC Removal
    Rahmoune, Hafidha
    Dahlab, Soundous
    Nasser, Mohamed
    Abomunassar, Sundus Ahmed Mohsen
    Guo, Jifeng
    CHEMISTRYSELECT, 2025, 10 (02):
  • [49] Synthesis and characterization of activated carbon produced from kenaf core fiber using H3PO4 activation
    Shamsuddin, M. S.
    Yusoff, N. R. N.
    Sulaiman, M. A.
    5TH INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MINERALS AND ENVIRONMENT (RAMM) & 2ND INTERNATIONAL POSTGRADUATE CONFERENCE ON MATERIALS, MINERAL AND POLYMER (MAMIP), 2016, 19 : 558 - 565
  • [50] The role of H3PO4 in the preparation of activated carbon from NaOH-treated rice husk residue
    Li, Yaxin
    Zhang, Xian
    Yang, Ruiguang
    Li, Guiying
    Hu, Changwei
    RSC ADVANCES, 2015, 5 (41) : 32626 - 32636