Corrosion behaviour of the microbially modified surface of 5083 aluminium alloy

被引：6
|
作者：
Nkoua, C. [1 ]
Josse, C. [2 ]
Proietti, A. [2 ]
Basseguy, R. [3 ]
Blanc, C. [1 ]
机构：
[1] Univ Toulouse, CNRS, INP, ENSIACET,CIRIMAT, 4 Allee Emile Monso,CS 44362, F-31030 Toulouse 4, France
[2] Univ Toulouse, CNRS, INP, UPS,INSA,UAR Raimond Castaing, 3 Rue Caroline Aigle, F-31400 Toulouse, France
[3] Univ Toulouse, CNRS, INP, LGC,UPS, 4 Allee Emile Monso,CS 44362, F-31030 Toulouse 4, France
来源：
CORROSION SCIENCE | 2023年 / 210卷
关键词：
A; aluminium; intermetallics; B; polarization; C; pitting corrosion; microbiological corrosion; AL-MG ALLOYS; INTERMETALLIC PHASES; PERFORMANCE; AA5083;
D O I：
10.1016/j.corsci.2022.110812
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of microorganism-induced surface modifications on the corrosion behaviour of 5083 H11 aluminium alloy was studied. Pre-immersion in natural seawater (between 15 days and 2 months) led to the growth of a dense oxy-hydroxyde layer on the AA5083 surface. This layer led to a decrease in the cathodic and corrosion current densities, and an increase in the passivity domain on the polarisation curves plotted in chloride-containing sulphate solution for pre-immersed samples compared to bare samples. This improvement in the corrosion behaviour of AA5083 depended on the alloy microstructure, and the sunlight exposure during the pre-immersion in natural seawater.
引用
收藏
页数：16
相关论文
共 50 条
  • [41] Electrochemical study of Aluminium alloy AA 5083 corrosion induced by elemental mercury in LNG industries
    Zerouali, D.
    Derriche, Z.
    Azri, M.Y.
    Journal of Applied Sciences, 2006, 6 (11) : 2491 - 2495
  • [42] The effect of surface finishing and aluminium thin film coating on corrosion behaviour of AZ31 alloy
    Marndi, Sundeep Kumar
    Chitrarasu, K.
    Thangadurai, P.
    DAE SOLID STATE PHYSICS SYMPOSIUM 2019, 2020, 2265
  • [43] Fatigue crack propagation behaviour of welded and weld-repaired 5083 aluminium alloy joints
    Wu, WD
    Shankar, K
    RISK, ECONOMY AND SAFETY, FAILURE MINIMISATION AND ANALYSIS: FAILURES 2000, 2000, : 453 - +
  • [44] Influence of forming parameters on static recrystallization behaviour during hot rolling aluminium alloy 5083
    Duan, X
    Sheppard, T
    MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2002, 10 (04) : 363 - 380
  • [45] Effects of the temperature of warm rolling on the superplastic behaviour of AA5083 aluminium base alloy
    Pimenoff, J
    Yagodzinskyy, Y
    Romu, J
    Hänninen, H
    SUPERPLASTICITY IN ADVANCED MATERIALS, ICSAM-2000, 2001, 357-3 : 277 - 282
  • [46] Quasi-static deformation and final fracture behaviour of aluminium alloy 5083: influence of cryomilling
    Topping, Troy D.
    Hu, Tao
    Manigandan, K.
    Srivatsan, T. S.
    Lavernia, E. J.
    PHILOSOPHICAL MAGAZINE, 2013, 93 (08) : 899 - 921
  • [47] Characterisation of figure-eight shaped oscillation laser welding behaviour of 5083 aluminium alloy
    Kabasakaloglu, Tugce S.
    Erdogan, Metehan
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2020, 25 (07) : 609 - 616
  • [48] Hot corrosion behaviour of yttrium and aluminium modified wear resistance coating alloy in mixed sulphate at 900 °C
    Rehman, Abdul
    Bidabadi, Mohammad Hassan Shirani
    Liang, Yang
    Yu, Zheng
    Zhang, Chi
    Chen, Hao
    Yang, Z. -G.
    CORROSION SCIENCE, 2020, 165
  • [49] Grain refinement and superplastic behaviour of a modified 6061 aluminium alloy
    Kaibyshev, R
    Musin, F
    Gromov, D
    Nieh, TG
    Lesuer, DR
    MATERIALS SCIENCE AND TECHNOLOGY, 2003, 19 (04) : 483 - 490
  • [50] Effect of nitriding on corrosion behaviour of graphite reinforced aluminium alloy composites
    Girish, B. M.
    Vitala, H. R.
    Satish, B. M.
    CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2013, 48 (01) : 51 - 54
12345