Design and validation of impedance probe for platform-independent ionospheric plasma diagnostics

被引:1
|
作者
Ryu, Kwangsun [1 ]
Lee, Seunguk [1 ,2 ]
Woo, Chang Ho [1 ]
机构
[1] Korea Adv Inst Sci & Technol, Satellite Technol Res Ctr, Daejeon 34141, South Korea
[2] Chungbuk Natl Univ, Dept Astron & Space Sci, Chungju 28644, South Korea
基金
新加坡国家研究基金会;
关键词
Ionosphere; Plasma; Impedance probe; Resonance; Satellite; LANGMUIR PROBE; FREQUENCY; OBJECTIVES;
D O I
10.1016/j.cap.2023.05.003
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The design of an impedance probe (IP), which is one of the instruments in the package called IAMMAP for the CAS500-3 satellite, and related plasma chamber experiments are introduced. The characteristics of the IP were estimated based on plasma and antenna theory. Trade-off studies on the possible geometry and on the circuit configuration were carried out. It was shown that the combination of a short wave monopole antenna and a capacitor bridge with a heterodyne configuration is suitable for ionospheric plasma diagnostics. The plasma chamber experiments reveal that the upper hybrid resonance frequency measured by the IP is compatible with the plasma model and with the Ne values estimated by the Langmuir probe (LP). This suggests that the compactly -designed IP and LP can serve as a good combination for in-situ measurement of the ionospheric plasma providing self-calibrated plasma parameters.
引用
收藏
页码:71 / 79
页数:9
相关论文
共 36 条
  • [31] DESIGN AND EVALUATION OF A COMPUTER-CONTROLLED LANGMUIR PROBE SYSTEM FOR GLOW-DISCHARGE PLASMA DIAGNOSTICS
    FANG, DC
    WILLIAMS, RR
    MARCUS, RK
    JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY, 1990, 5 (06) : 569 - 573
  • [32] Design, Construction and Validation of an Electrical Impedance Probe with Contact Force and Temperature Sensors Suitable for in-vivo Measurements
    Albert Ruiz-Vargas
    Antoni Ivorra
    John William Arkwright
    Scientific Reports, 8
  • [33] Design, Construction and Validation of an Electrical Impedance Probe with Contact Force and Temperature Sensors Suitable for in-vivo Measurements
    Ruiz-Vargas, Albert
    Ivorra, Antoni
    Arkwright, John William
    SCIENTIFIC REPORTS, 2018, 8
  • [34] Design and validation of the ball-pen probe for measurements in a low-temperature magnetized plasma
    Bousselin, G.
    Cavalier, J.
    Pautex, J. F.
    Heuraux, S.
    Lemoine, N.
    Bonhomme, G.
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2013, 84 (01):
  • [35] Design of a custom insertable probe platform for measurements of C-2W inner divertor plasma parameters
    DuBois, A. M.
    Sokolov, V.
    Knapp, K.
    Thompson, M. C.
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2018, 89 (10):
  • [36] Design & validation of Low-cost RF Current probe to estimate the Surface Transfer Impedance (STI) of Co-axial cable under test using LabVIEW software
    Reddy, P. Raghunadha
    Kumar, P. Siva
    Rao, K. Chandra Bhushana
    2016 14TH INTERNATIONAL CONFERENCE ON ELECTROMAGNETIC INTERFERENCE & COMPATIBILITY (INCEMIC-2016), 2016,