Research on fatigue life prediction model for 2A70-T6 aluminum alloy at different strain ratios

被引:2
|
作者
Wei, Yaobing [1 ]
Li, Yanan [1 ]
Liu, Jianhui [1 ]
Wang, Gai [2 ]
Guo, Yanlei [1 ]
Pan, Xuemei [1 ]
机构
[1] Lanzhou Univ Technol, Lanzhou, Peoples R China
[2] Xinxiang Aviat Ind Grp Co Ltd, Xinxiang, Peoples R China
基金
中国国家自然科学基金;
关键词
Strain ratio; Strain amplitude; Fatigue life; LOW-CYCLE FATIGUE; MEAN STRAIN; BEHAVIOR; DAMAGE;
D O I
10.1108/IJSI-05-2023-0044
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
PurposeIn practical engineering, oil filters often work under asymmetric cyclic loading. In order to improve the prediction accuracy of fatigue life of the oil filters under asymmetric cyclic loading, the effect of strain ratio and low cycle fatigue plastic deformation on fatigue life need to be considered. This paper aims to discuss the aforementioned objective.Design/methodology/approachFirst, strain-controlled fatigue tests with strain ratios of 0, 0.5 and -1 were carried out on the oil filter material 2A70-T6 aluminum alloy, and the test data were used to obtain strain fatigue life curves at three strain ratios. Then, based on the idea of the constant life curve method, the average value of the ratio of the strain amplitude corresponding to different strain ratios under the same partial life was defined as the strain ratio factor. Finally, the elastic-plastic factor was modified by the strain ratio factor, and a new fatigue life prediction model considering the effect of strain ratio was proposed.FindingsThe proposed model was validated, respectively, by fatigue test data of 2A70-T6 aluminum alloy, 2124-T851 aluminum alloy and oil filter and the results of the proposed model were compared with the Coffin-Manson equation, Morrow model and Smith-Watson-Topper (SWT) model, showing that the proposed model had higher applicability and accuracy.Originality/valueIn this work, a strain ratio factor is established based on the idea of the constant life curve method, and the strain ratio factor is used to modify the introduced elastic-plastic factor, and then a new fatigue life prediction model considering the influence of strain ratio and low cycle fatigue plastic deformation on material fatigue damage accumulation is proposed. The results show that the prediction results of the proposed model are in good agreement with the experimental data, and the proposed model has good fatigue life prediction ability considering the influence of strain ratio and lays a foundation for the fatigue life prediction of the oil filter.
引用
收藏
页码:981 / 999
页数:19
相关论文
共 50 条
  • [41] Fatigue life prediction of aluminum alloy T-welded joints root failure based on equivalent crack method
    Wang, Chao
    Yang, Bing
    Zhu, Tao
    Tian, Xiaochen
    Xiao, Shoune
    Yang, Guangwu
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2023, 46 (09) : 3209 - 3224
  • [42] Life prediction of 6201-T81 aluminum alloy wires under fretting fatigue and variable amplitude loading
    Matos, I. M.
    Araujo, J. A.
    Castro, F. C.
    TRIBOLOGY INTERNATIONAL, 2023, 183
  • [43] Corrosion Fatigue in 7075-T6 Aluminum: Life Prediction Issues for Carrier-Based Operations
    Shafiq, B. (a_basir@rumac.uprm.edu), 1600, American Institute of Aeronautics and Astronautics Inc. (41):
  • [44] Corrosion fatigue in 7075-T6 aluminum: Life prediction issues for carrier-based operations
    Shafiq, B
    Agarwala, VS
    JOURNAL OF AIRCRAFT, 2004, 41 (02): : 393 - 398
  • [45] Flow and fracture behavior of aluminum alloy 6082-T6 at different tensile strain rates and triaxialities
    Chen, Xuanzhen
    Peng, Yong
    Peng, Shan
    Yao, Song
    Chen, Chao
    Xu, Ping
    PLOS ONE, 2017, 12 (07):
  • [46] Fatigue characteristics of aluminum cast alloy AC2B-T6 with cast skin
    Ohama, S
    Yoshimura, T
    Noguchi, H
    FATIGUE DAMAGE OF MATERIALS: EXPERIMENT AND ANALYSIS, 2003, 5 : 55 - 63
  • [47] Fatigue Damage Accumulation Model of 6082-T6 Aluminum Alloy in Conditions of Block Bending and Torsion
    Bohm, Ewelina
    Kurek, Marta
    Lagoda, Tadeusz
    JOURNAL OF TESTING AND EVALUATION, 2020, 48 (06) : 4416 - 4434
  • [48] Welding parameters influence on fatigue life and microstructure in resistance spot welding of 6061-T6 aluminum alloy
    Florea, R. S.
    Bammann, D. J.
    Yeldell, A.
    Solanki, K. N.
    Hammi, Y.
    MATERIALS & DESIGN, 2013, 45 : 456 - 465
  • [49] An investigation of the reduction in tensile strength and fatigue life of pre-corroded 7075-T6 aluminum alloy
    Obert, B
    Ngo, K
    Hashemi, J
    Ekwaro-Osire, S
    Sivam, TP
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2000, 9 (04) : 441 - 448
  • [50] A data driven model for estimating the fatigue life of 7075-T651 aluminum alloy based on the updated BP model
    Yu, XuanRui
    Feng, Zhang Gao
    Hua, Jin Hong
    Xiang, Song An
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 1252 - 1263