H-infinity Variable-Pitch Control for Wind Turbines Based on Takagi-Sugeno Fuzzy Theory

When the wind speed is above the rated value, the output power of the wind turbine should be maintained at the rated value in order to prevent the power generation system from overheating. In addition, the natural wind speed will fluctuate randomly in a large range of values, making the traditional control effect not ideal. This paper presents a novel H-infinity (H-infinity) pitch control strategy for Wind Turbine Generators (WTGs), which can make the rotor speed and output power constant when the wind speed changes in a large range. In order to shorten response time and reduce overshoot, in the specific solution, the control method combines the H-infinity theory and the Takagi-Sugeno (T-S) fuzzy theory. Firstly, the linearized models of several operating points were obtained with the T-S fuzzy theory. Then, a robust controller was designed for each linear sub-system based on the H-infinity control theory. Furthermore, the controllers of the sub-systems were superimposed into a global controller for the entire system through the membership function. Finally, modeling and simulation were carried out in MATLAB/SIMULINK. The simulation results show that when the wind speed changes above the rated speed, the rotor speed can be maintained at the rated value, and the output power also can be maintained at the rated value. Compared with the optimal control, the response speed of this method is faster and the overshoot is smaller. It provides a new idea for the pitch angle control of wind turbine.