Design of a Focusing Mechanism Actuated by Piezoelectric Ceramics for TMA Telescope

被引:8
|
作者
Lu, Ying [1 ,2 ]
Chen, Changzheng [1 ]
Zhu, Junqing [1 ]
机构
[1] Chinese Acad Sci, Changchun Inst Opt, Fine Mech & Phys, Changchun 130033, Peoples R China
[2] Univ Chinese Acad Sci, Beijing 100049, Peoples R China
基金
中国国家自然科学基金;
关键词
focusing technology; piezoelectric ceramic actuator; flexible support; HIGH-PRECISION;
D O I
10.3390/s23104610
中图分类号
O65 [分析化学];
学科分类号
070302 ; 081704 ;
摘要
With the development of space telescopes towards high-resolution and intelligent imaging, the scale and complexity of the focal plane components of large-aperture, off-axis, three-mirror anastigmatic (TMA) optical systems are increasing. Traditional focal plane focusing technology reduces the system reliability and increases the scale and complexity. This paper proposes a three-degrees-of-freedom focusing system based on a folding mirror reflector, with a piezoelectric ceramic actuator as the driver. An environment-resistant flexible support was designed for the piezoelectric ceramic actuator through an integrated optimization analysis. The fundamental frequency of the large-aspect-ratio rectangular folding mirror reflector focusing mechanism was around 121.5 Hz. After testing, it was found to meet the requirements of the space mechanics environment. This system shows promise for application to other optical systems as an open-shelf product in the future.
引用
收藏
页数:16
相关论文
共 50 条
  • [31] Design and research of piezoelectric ceramics drive power
    Liu, Guang Ya
    Xu, Guang Yu
    Sensors and Transducers, 2014, 163 (01): : 28 - 32
  • [32] Simulation analysis and design of electron deflector for eXTP focusing telescope
    Zheng, Renzhou
    Qiang, Pengfei
    Yang, Yanji
    Yan, Yongqing
    Li, Yue
    Sheng, Lizhi
    Chen, Yong
    ACTA PHYSICA SINICA, 2025, 74 (05)
  • [33] Degradation mechanism in a durability test of PZT piezoelectric ceramics
    Sakai, Takenobu
    Ogawa, Shusui
    Sakaida, Yoshihisa
    Kawamoto, Hiroshi
    Yanagida, Hiroaki
    Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan, 1999, 107 (1249): : 827 - 831
  • [34] Degradation mechanism in a durability test of PZT piezoelectric ceramics
    Sakai, T
    Ogawa, S
    Sakaida, Y
    Kawamoto, H
    Yanagida, H
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1999, 107 (09) : 827 - 831
  • [35] The design of aerial camera Focusing Mechanism
    Hu, Changchang
    Yang, Hongtao
    Niu, Haijun
    AOPC 2015: OPTICAL TEST, MEASUREMENT, AND EQUIPMENT, 2015, 9677
  • [36] Recent design and development of piezoelectric-actuated compliant microgrippers: A review
    Lyu, Zekui
    Xu, Qingsong
    SENSORS AND ACTUATORS A-PHYSICAL, 2021, 331
  • [37] Design and Experimental Study of Piezoelectric Actuated Micro Precision Clamping Mechanisms
    Li C.
    Tong Y.
    Liang K.
    Zhong W.
    Fang J.
    Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2022, 33 (11): : 1302 - 1308and1385
  • [38] Design, Modeling, and Analysis of Piezoelectric-Actuated Device for Blood Sampling
    Haldkar, Rakesh Kumar
    Gupta, Vijay Kumar
    Sheorey, Tanuja
    Parinov, Ivan A.
    APPLIED SCIENCES-BASEL, 2021, 11 (18):
  • [39] Design and Analysis of a Piezoelectric-Actuated Biaxial Asymmetrical Compliant Micromanipulator
    Lyu, Zekui
    Xu, Qingsong
    IECON 2021 - 47TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2021,
  • [40] Design and Testing of a New Piezoelectric-Actuated Symmetric Compliant Microgripper
    Lyu, Zekui
    Xu, Qingsong
    ACTUATORS, 2022, 11 (03)