Synergistic Defect Passivation and Crystallization Modulation in Efficient Perovskite Solar Cells: The Case of Multifunctional 2-Anisidine-4-Sulfonic Acid

With the continuous development of the performance of perovskite solar cells, the high-density defects on the perovskite film surface and grain boundaries as well as undesired perovskite crystallization are increasingly emerging as challenges to their commercial application. Herein, a dye intermediate 2-anisidine-4-sulfonic acid (2A4SA), containing sulfonic acid group (SO3-), amino group (-NH2), methoxy group (CH3O-), and benzene ring, which exhibit a synergistic effect in comprehensive defect passivation and crystallization modulation, is incorporated. Detailed investigations show that the SO3- of 2A4SA with high electronegativity firmly chelates with uncoordinated lead ions through the coordination interaction, while the -NH2 and the CH3O- of 2A4SA separately immobilize iodide ions and organic cations in the perovskite lattice through hydrogen bonds, enabling substantially decreased nonradiative recombination and trap state density. Meanwhile, 2A4SA molecules attached to the surface of perovskite nuclei can delay crystallization kinetics and promote preferred vertical growth orientation, thereby attaining the high-crystallinity and large-size-grain perovskite films. Consequently, the 2A4SA-doped device with the structure ITO/SnO2/Cs(0.15)FA(0.75)MA(0.10)PbI(3) (2A4SA)/Spiro-OMeTAD/Ag presents a splendid power conversion efficiency (PCE) of 23.06% accompanied by increased open-circuit voltage (1.15 V) and fill factor (82.17%). Furthermore, the optimized film and device demonstrate enhanced long-term stability. The unencapsulated optimized device retains approximate to 80% of the original PCE after 1000 h upon exposure to ambient atmosphere (20-50% RH), whereas the control group is only 56.8%.