Non-equimolar Cantor high entropy alloy fabrication using metal powder cored wire arc additive manufacturing

被引：5

作者：

Zavdoveev, Anatoliy ^{[1
]}

Klapatyuk, Andrey ^{[1
]}

Baudin, Thierry ^{[2
]}

MacDonald, Eric ^{[3
]}

Mohan, Dhanesh ^{[4
]}

Oliveira, J. P. ^{[5
]}

Gajvoronskiy, Alex ^{[1
]}

Poznyakov, Valeriy ^{[1
]}

Kim, Hyoung Seop ^{[6
]}

Brisset, Francois ^{[2
]}

Khokhlov, Maksym ^{[1
]}

Heaton, Mark ^{[7
]}

Rogante, Massimo ^{[8
]}

Skoryk, Mykola ^{[9
]}

Vedel, Dmitry ^{[10
]}

Kozin, Roman ^{[1
]}

Klochkov, Illya ^{[1
]}

Motrunich, Sviatoslav ^{[1
]}

机构：

[1] NAS Ukraine, Paton Elect Welding Inst, KMalevicha 11, UA-03150 Kiev, Ukraine

[2] Univ Paris Saclay, Inst Chim Mol & Materiaux Orsay, CNRS, F-91405 Orsay, France

[3] Univ Texas El Paso, El Paso, TX 79968 USA

[4] Harbin Inst Technol, Dept Mat Proc Engn, Zhengzhou Res Inst, Zhengzhou, Peoples R China

[5] Univ NOVA Lisboa, NOVA Sch Sci & Technol, Dept Mat Sci, CENOT I3N, P-2829516 Caparica, Portugal

[6] Pohang Univ Sci & Technol, Dept Mat Sci & Engn, POSTECH, Pohang 37673, South Korea

[7] Adv Nano Technol, ANT, Pk West Business Pk,Nandor Rd, Dublin, Ireland

[8] Rogante Engn Off, Contrada San Michele 1, I-62012 Civitanova Marche, Italy

[9] GV Kurdyumov Inst Met Phys NAS Ukraine, Kiev, Ukraine

[10] IM Frantsevich Inst Problems Mat Sci NAS Ukraine, St Krzyzanowski, Kiev, Ukraine

来源：

ADDITIVE MANUFACTURING LETTERS | 2023年 / 6卷

基金：

新加坡国家研究基金会;

关键词：

High entropy alloy; Wire arc additive manufacturing; Metal powder cored wire; Mechanical properties; Structure; MECHANICAL-PROPERTIES; MICROSTRUCTURE; BEHAVIOR; STRENGTH;

D O I：

10.1016/j.addlet.2023.100124

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In the current contribution, the wire arc additive manufacturing of non-equimolar Co-Cr-Fe-Mn-Ni high-entropy alloy using gas metal arc welding (GMAW) with metal powder-cored wire (MPCW) is proposed. The powder's filler of designed wire feedstock contains Co-Cr-Mn-Ni components in equal atomic amounts relative to each other with Fe metal stripe as a shield. The proposed method provides the possibility to build bulk high-entropy alloy samples with the desired characteristics. The current work approach is superior in a number of indicators to such alternative methods of obtaining bulk HEAs as melting in vacuum, plasma arc melting, selective laser melting, or electron beam melting.

引用

页数：7

共 50 条

[41] Achieving high strength and ductility in VCoNi medium-entropy alloy via wire and arc additive manufacturing with elemental wires
Zhang, X.
Huang, H. Q.
Wang, B.
Yin, Y. Z.
Yang, K.
Li, N.
Pan, J.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 913
[42] Strain-Rate-Dependent mechanical behavior of a non-Equimolar CoCrFeMnNi high entropy alloy with a segmented coarse grain structure
Li, Haoyang
Shao, Chenwei
Orhan, Okan K.
Rojas, David Funes
Ponga, Mauricio
Hogan, James D.
MATERIALIA, 2022, 21
[43] Material property control of CuSn alloy using wire and arc additive manufacturing (Translated)
Mafune, Yuta
Katagiri, Naoya
Hanai, Takafumi
Kubota, Masanori
Abe, Takeyuki
Kaneko, Jun'ichi
MECHANICAL ENGINEERING JOURNAL, 2024, 11 (02):
[44] Deposition of Stellite 6 alloy on steel substrates using wire and arc additive manufacturing
Lin, Zidong
Ya, Wei
Subramanian, Vignesh Venkata
Goulas, Constantinos
di Castri, Benedetto
Hermans, Marcel J. M.
Pathiraj, Belavendram
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 111 (1-2): : 411 - 426
[45] Deposition of Stellite 6 alloy on steel substrates using wire and arc additive manufacturing
Zidong Lin
Wei Ya
Vignesh Venkata Subramanian
Constantinos Goulas
Benedetto di Castri
Marcel J. M. Hermans
Belavendram Pathiraj
The International Journal of Advanced Manufacturing Technology, 2020, 111 : 411 - 426
[46] Fabrication of high-strength dual FCC phase Co-Cr-Fe-Ni-Cu-Mo high entropy alloy by plasma arc additive manufacturing using a combined cable wire
Shi, Bang
Xin, Dongqun
Chen, Xizhang
Wang, Yanhu
Singh, Arvind
MATERIALS LETTERS, 2023, 337
[47] Characterisation of 4043 aluminium alloy deposits obtained by wire and arc additive manufacturing using a Cold Metal Transfer process
Ortega, Arturo Gomez
Galvan, Luis Corona
Salem, Mehdi
Moussaoui, Kamel
Segonds, Stephane
Rouquette, Sebastien
Deschaux-Beaume, Frederic
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2019, 24 (06) : 538 - 547
[48] Additive manufacturing of a functionally graded high entropy alloy using a hybrid powder-bed wire-based direct energy deposition approach
Lu, Yao
Wang, Jun
Williams, Stewart
Zhu, Lisong
Ding, Jialuo
Diao, Chenglei
Jiang, Zhengyi
ADDITIVE MANUFACTURING, 2023, 63
[49] On the development of pseudo-eutectic AlCoCrFeNi2.1 high entropy alloy using Powder-bed Arc Additive Manufacturing (PAAM) process
Dong, Bosheng
Wang, Zhiyang
Pan, Zengxi
Muransky, Ondrej
Shen, Chen
Reid, Mark
Wu, Bintao
Chen, Xizhang
Li, Huijun
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 802
[50] Deep learning assisted fabrication of metallic components using the robotic wire arc additive manufacturing
Zheng, Pingyang
Han, Shaohua
Xue, Dingqi
Fu, Ling
Jiang, Bifeng
RAPID PROTOTYPING JOURNAL, 2024, 30 (04) : 733 - 744

← 1 2 3 4 5 →