Numerical analysis of uneven coating near steel strip edges in continuous hot-dip galvanizing

被引：1
|
作者：
Mali, Chetan [1 ]
Rai, Anant Kumar [1 ,2 ]
Shrivastava, Navam [1 ]
Lam, Prasanth Anand Kumar [1 ]
机构：
[1] Natl Inst Technol, Warangal, Telangana, India
[2] Natl Inst Technol, Dept Mech Engn, Near Fathima Nagar, Kazipet 506004, India
来源：
IRONMAKING & STEELMAKING | 2023年 / 50卷 / 09期
关键词：
Coating; steel; air jet; hot-dip; galvanization; detached eddy simulation (DES); JET; TEMPERATURE; PREVENT; SYSTEM;
D O I：
10.1080/03019233.2023.2176543
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In a continuous hot-dip galvanizing process, the opposite air jets from the air knife nozzles collide with each other in the region near the steel strip edges, causing complex 3D von Karman vortices. The vortices alter the pressure gradient of wiping air jet over the steel strip edge surfaces, causing uneven coating thickness. Here, the effects of the excess air vortices on zinc coating distribution at the edges are investigated with 3D eddy structures in the region of collision using detached eddy simulation (DES). The wiping pressure and shear stresses, obtained numerically, were used as boundary conditions in an analytical model to predict the stagnation line - a bottleneck region in the zinc wiping process. In comparison with experiments, the proposed analytical model successfully computes the quantity of zinc dragged upward by wiping air and the transient variations in coating values near steel strip edges.
引用
收藏
页码：1181 / 1194
页数：14
相关论文
共 50 条
  • [41] Crystallography of intermetallic interface layers in hot-dip galvanizing steel sheets
    Ohtsubo, H
    Yagi, T
    Nakai, K
    Ohmori, Y
    ISIJ INTERNATIONAL, 1996, 36 (03) : 317 - 323
  • [42] Optimum pickling time of carbon steel prior to hot-dip galvanizing
    Sarhan, HS
    BRIDGING THE CENTURIES WITH SAMPE'S MATERIALS AND PROCESSES TECHNOLOGY, VOL 45, BOOKS 1 AND 2, 2000, : 513 - 524
  • [43] Study on the behavior of additives in steel hot-dip galvanizing by DFT calculations
    Jin, HM
    Li, Y
    Liu, HL
    Wu, P
    CHEMISTRY OF MATERIALS, 2000, 12 (07) : 1879 - 1883
  • [44] Hot-dip galvanizing process and coating corrosion behavior of fe-mn-al-c steel
    Zhou, Huasheng
    Tang, Lizhi
    Zhang, Xiaofeng
    Yang, Yong
    SURFACE ENGINEERING, 2024, 40 (06) : 730 - 741
  • [45] Environmental factors in failure during structural steel hot-dip galvanizing
    Carpio, J.
    Casado, J. A.
    Alvarez, J. A.
    Gutierrez-Solana, F.
    ENGINEERING FAILURE ANALYSIS, 2009, 16 (02) : 585 - 595
  • [46] Influences of Cu in steel on the formation of alloy layer in hot-dip galvanizing
    Komatsu, A
    Ando, A
    Kittaka, T
    ISIJ INTERNATIONAL, 1997, 37 (03) : 283 - 289
  • [47] Theoretical Investigation of the Interfacial Reactions during Hot-Dip Galvanizing of Steel
    Mandal, G. K.
    Balasubramaniam, R.
    Mehrotra, S. P.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (03): : 637 - 645
  • [48] Theoretical Investigation of the Interfacial Reactions during Hot-Dip Galvanizing of Steel
    G.K. Mandal
    R. Balasubramaniam
    S.P. Mehrotra
    Metallurgical and Materials Transactions A, 2009, 40 : 637 - 645
  • [49] Drying of steel pipes at a hot-dip galvanizing plant by induction heating
    Sirin, Sule Yildiz
    MATERIALS TESTING, 2020, 62 (03) : 291 - 298
  • [50] CRYSTAL ORIENTATION AND ELEMENT DISTRIBUTION OF SPANGLE ON HOT-DIP GALVANIZING STEEL
    FUKUI, Y
    KODA, M
    HIROSE, Y
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1991, 77 (07): : 939 - 946
12345