Comprehensive study on in-plane eddy-current loss in permanent-magnet synchronous machines

被引：1
|
作者：
Ohguchi, Hideki [1 ,3 ]
Takigawa, Shion [1 ]
Imamori, Satoshi [2 ]
机构：
[1] Tokai Univ, Sch Engn, Dept Elect & Elect Engn, Hiratsuka, Japan
[2] Fuji Elect Co Ltd, Adv Technol Lab, Hino, Japan
[3] 4-1-1 Kitakaname, Hiratsuka, Kng 2591292, Japan
来源：
IET ELECTRIC POWER APPLICATIONS | 2024年 / 18卷 / 03期
关键词：
eddy current losses; finite element analysis; permanent magnet machines;
D O I：
10.1049/elp2.12386
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
In-plane eddy-current loss in permanent-magnet synchronous machines has been comprehensively and analytically studied by using three-dimensional (3D) finite element method. Considering the accuracy and calculation time, the electrical conductivity in the stack direction should be set to zero in 3D analysis. Stacking factor is also an important analytical parameter in this kind of calculation. The influences of slot number and coil-end height have been clarified. Harmonics caused by an inverter in pulse-width-modulation or one-pulse mode result in additional in-plane eddy-current loss, which is independent of the slot number. This behaviour can be explained by a theoretical equation of the eddy-current loss. These results are useful for the analysis and design of highly efficient electrical machines. In this paper, in-plane eddy-current loss in permanent-magnet synchronous machines has been comprehensively and analytically studied by using three-dimensional finite element method. The influences of slot number and coil-end height have been clarified. Harmonics caused by an inverter in pulse-width-modulation or one-pulse mode result in additional in-plane eddy-current loss, which is independent of the slot number.image
引用
收藏
页码：278 / 286
页数：9
相关论文
共 50 条
  • [41] Eddy current loss analysis in permanent magnets of synchronous machines
    Gerlach, Tobias
    Steckel, Richard
    Hubert, Thomas
    Kremser, Andreas
    PROCEEDINGS OF 2016 6TH INTERNATIONAL ELECTRIC DRIVES PRODUCTION CONFERENCE (EDPC), 2016, : 246 - 252
  • [42] Improved Eddy-current Field Loss Model and Scaling Index for Magnets of Permanent Magnet Synchronous Motors
    Zhang, Lei
    Gao, Chunxia
    2015 3RD ASIA CONFERENCE ON MECHANICAL AND MATERIALS ENGINEERING (ACMME 2015), 2015, 26
  • [43] Rotor Eddy-Current Losses Reduction in an Axial Flux Permanent-Magnet Machine
    Jara, Werner
    Lindh, Pia
    Tapia, Juan A.
    Petrov, Ilya
    Repo, Anna-Kaisa
    Pyrhonen, Juha
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2016, 63 (08) : 4729 - 4737
  • [44] A Survey of State-of-the-Art Methods to Compute Rotor Eddy-Current Losses in Synchronous Permanent Magnet Machines
    Tessarolo, Alberto
    2017 IEEE WORKSHOP ON ELECTRICAL MACHINES DESIGN, CONTROL AND DIAGNOSIS (WEMDCD), 2017,
  • [45] Permanent-magnet linear eddy-current brake with a non-magnetic reaction plate
    School of Engineering, University of Sussex, Brighton, East Sussex, BN1 9QT, United Kingdom
    IEE Proc Electr Power Appl, 6 (627-631):
  • [46] Modelling of eddy-current losses in a surface-mounted NdFeB permanent-magnet generator
    Wu, W
    Dunlop, JB
    Collocott, SJ
    RARE EARTH MAGNETS AND THEIR APPLICATIONS, 2002, : 323 - 328
  • [47] Influence of the Amount of Permanent-Magnet Material in Fractional-Slot Permanent-Magnet Synchronous Machines
    Sergeant, Peter
    Van den Bossche, Alex P. M.
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2014, 61 (09) : 4979 - 4989
  • [48] Permanent-magnet linear eddy-current brake with a non-magnetic reaction plate
    Edwards, JD
    Jayawant, BV
    Dawson, WRC
    Wright, DT
    IEE PROCEEDINGS-ELECTRIC POWER APPLICATIONS, 1999, 146 (06): : 627 - 631
  • [49] MODELING OF EDDY CURRENT LOSS AND TEMPERATURE OF THE MAGNETS IN PERMANENT MAGNET MACHINES
    Ding, Xiaofeng
    Mi, Chris
    JOURNAL OF CIRCUITS SYSTEMS AND COMPUTERS, 2011, 20 (07) : 1287 - 1301
  • [50] Eddy-current loss analysis in rotor of surface-mounted permanent magnet machines using analytical method
    Choi, Jang-Young
    Choi, Ji-Hwan
    Jang, Seok-Myeong
    Cho, Han-Wook
    Lee, Sung-Ho
    Transactions of the Korean Institute of Electrical Engineers, 2012, 61 (08): : 1115 - 1122
12345