Seismic Performance of Built-In Continuous-Column Steel Moment Frame with Low-Damage CPSFC at Column Bases

Integrating the concepts of frictional energy dissipation and low-damage mechanism, this paper proposes a built-in continuous-column (BCC) steel moment frame structure with low-damage cover plate slip-friction connections (CPSFCs) at the column bases. The slip-friction connections can convert the buckling energy dissipation of the column into frictional energy dissipation, and the continuous column can improve the lateral deformation mode of the structure under seismic action. The strength and stiffness deterioration characteristics of the material were considered in the simulation of the seismic performance of the structure, and the simplified numerical models of CPSFCs and continuous columns were established in OpenSees. Comparative analyses were carried on a seven-story steel frame, steel moment frame (SMF) with CPSFCs at the column bases (CPSFC-SMF), and a built-in continuous column steel frame (BCCF) with CPSFC at the column bases (CPSFC-BCCF). The results showed that CPSFC slightly reduced the bearing capacity of the steel moment frame but minished the structural stiffness degradation and increased the ductility of the structure. The setting of CPSFC changed the plasticity hinge sequence of the structure, resulting in a homogeneous deformation between stories. The CPSFC-BCCF had the best damage pattern and the most uniform inter-story energy dissipation.