Combined effect of DEE and Jatropha biodiesel-diesel fuel blends on the enhancement of VCR diesel engine parameters at varying loads and compression ratios

被引:1
|
作者
Varpe, B. R. [1 ,2 ]
Kharde, Y. R. [2 ,3 ]
机构
[1] Amrutvahini Coll Engn, Dept Mech Engn, Ahmednagar 422608, India
[2] Savitribai Phule Pune Univ, Pune, Maharashtra, India
[3] Sir Visvesvaraya Inst Technol, Dept Mech Engn, Nasik 422102, India
关键词
Jatropha biodiesel; Diethyl ether; VCR engine; diesel engine performance; diesel engine emissions; DIETHYL-ETHER; EMISSIONS CHARACTERISTICS; NANO-ADDITIVES; METHYL-ESTER; PERFORMANCE; COMBUSTION; ETHANOL; OIL; CURCAS; STABILITY;
D O I
10.1080/14484846.2022.2038405
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In the field of biodiesel, the oxygenised alternatives, dimethyl ether (DME) and diethyl ether (DEE), are the promising alternative due to high Cetane number and oxygen content. In this research, experimental analysis is done for different fuel blends of Jatropha oil and DEE as additives. Biodiesel of 10, 15, and 20% with 10% DEE is used by mixing with diesel named as A1, A2 and A3. For 20% of DEE with same % of biodiesel, second batch of blends is prepared as B1, B2 and B3. These blends are prepared, and their physicochemical properties are tested. The compression ratio (CR) at 16, 17 and 18 is used as input for engine performance and emission analysis. Load on the engine is increased from 3 kg to 12 kg as full load for all blends and diesel. Results shows that engine gives better performance at higher load and higher CR. A3 blend shows the highest value of BTE than other fuel blends and diesel at all CR and loads. A3 blend shows the lowest value of BSFC compared to other fuel blends at CR 16 and CR 18. Performance of A3 and B2 fuel blends is better than all other fuel blends.
引用
收藏
页码:1843 / 1860
页数:18
相关论文
共 50 条
  • [21] Predicting engine fuel properties of biodiesel and biodiesel-diesel blends using spectroscopy based approach
    Bukkarapu, Kiran Raj
    Krishnasamy, Anand
    FUEL PROCESSING TECHNOLOGY, 2022, 230
  • [22] The impact of fuel injection pressure on the exhaust emissions of a direct injection diesel engine fueled with biodiesel-diesel fuel blends
    Gumus, Metin
    Sayin, Cenk
    Canakci, Mustafa
    FUEL, 2012, 95 (01) : 486 - 494
  • [23] Combustion Parameters of LHR Diesel Engine Fueled with Jatropha Biodiesel and Its Blends
    Pandey, Krishna Kumar
    Nair, Sanju Sureshan
    Murugan, S.
    Lecture Notes in Mechanical Engineering, 2022, PartF1 : 133 - 145
  • [24] Effect of Sr@ZnO nanoparticles and Ricinus communis biodiesel-diesel fuel blends on modified CRDI diesel engine characteristics
    Soudagar, Manzoore Elahi M.
    Mujtaba, M. A.
    Safaei, Mohammad Reza
    Afzal, Asif
    Raju, Dhana
    Ahmed, Waqar
    Banapurmath, N. R.
    Hossain, Nazia
    Bashir, Shahid
    Badruddin, Irfan Anjum
    Goodarzi, Marjan
    Shahapurkar, Kiran
    Taqui, Syed Noeman
    ENERGY, 2021, 215
  • [25] Investigation of Biodiesel-Diesel Fuel Blends on Combustion Characteristics in a Light-Duty Diesel Engine Using OpenFOAM
    Ismail, Harun Mohamed
    Ng, Hoon Kiat
    Gan, Suyin
    Cheng, Xinwei
    Lucchini, Tommaso
    ENERGY & FUELS, 2013, 27 (01) : 208 - 219
  • [26] Combustion and emission characteristics of tamarind seed biodiesel-diesel blends in a compression ignition engine
    Venu, Harish
    Appavu, Prabhu
    INTERNATIONAL JOURNAL OF AMBIENT ENERGY, 2021, 42 (12) : 1441 - 1446
  • [27] THE PERFORMANCE AND EMISSIONS OF A DIESEL ENGINE FUELED WITH TEA SEED (Camellia sinensis) OIL BIODIESEL-DIESEL FUEL BLENDS
    Serin, Hasan
    Akar, Neslihan Yucel
    INTERNATIONAL JOURNAL OF GREEN ENERGY, 2014, 11 (03) : 292 - 301
  • [29] Influence of injector hole number on the performance and emissions of a DI diesel engine fueled with biodiesel-diesel fuel blends
    Sayin, Cenk
    Gumus, Metin
    Canakci, Mustafa
    APPLIED THERMAL ENGINEERING, 2013, 61 (02) : 121 - 128