Effect of a new upsetting process with large height-to-diameter ratio on the microstructure of Mg-Gd-Y-Zn-Zr alloy

被引：3
|
作者：
Ye, Yugang [1 ]
Liu, Chao [2 ]
Xue, Yong [2 ]
机构：
[1] ShanXi Inst Technol, Dept Mech Engn, Yangquan 045000, Peoples R China
[2] North Univ China, Sch Mat Sci & Engn, Taiyuan 030051, Peoples R China
来源：
MATERIALS LETTERS | 2023年 / 339卷
基金：
中国国家自然科学基金;
关键词：
Mg-Gd-Y-Zn-Zr; Severe plastic deformation; Upsetting; Dynamic recrystallization;
D O I：
10.1016/j.matlet.2023.134047
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, a new upsetting process with large height-to-diameter ratio is proposed, which breaks the limitation of the traditional upsetting process on the height-to-diameter ratio of the billet. The Mg-9.5Gd-4Y-2.2Zn-0.5Zr (wt.%) alloy bar with a height-to-diameter ratio of 6.5 was successfully upset and its microstructure evolution was investigated. The alloy underwent dynamic recrystallization (DRX) during upsetting, and the microstructure refinement was obvious, with the highest recrystallization ratio of 46.3 % in the center of the billet and the average grain size of 20.2 mu m. The basal texture was roughly parallel to the metal flow lines in each region, and weakened as the recrystallization rate increases.
引用
收藏
页数：4
相关论文
共 50 条
  • [41] Deformation Behavior of Ultra-Strong and Ductile Mg-Gd-Y-Zn-Zr Alloy with Bimodal Microstructure
    C. Xu
    G. H. Fan
    T. Nakata
    X. Liang
    Y. Q. Chi
    X. G. Qiao
    G. J. Cao
    T. T. Zhang
    M. Huang
    K. S. Miao
    M. Y. Zheng
    S. Kamado
    H. L. Xie
    Metallurgical and Materials Transactions A, 2018, 49 : 1931 - 1947
  • [42] Deformation Behavior of Ultra-Strong and Ductile Mg-Gd-Y-Zn-Zr Alloy with Bimodal Microstructure
    Xu, C.
    Fan, G. H.
    Nakata, T.
    Liang, X.
    Chi, Y. Q.
    Qiao, X. G.
    Cao, G. J.
    Zhang, T. T.
    Huang, M.
    Miao, K. S.
    Zheng, M. Y.
    Kamado, S.
    Xie, H. L.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (05): : 1931 - 1947
  • [43] Microstructure evolution and mechanical property of Mg-Gd-Y-Zn-Zr alloy wires prepared by hot drawing
    Ling, Zihan
    Chen, Mingyang
    Wang, Liqing
    Ma, Kai
    Zhang, Dongdong
    Li, Yunlong
    Zhang, Zhen
    Zhao, Zhanyong
    Bai, Peikang
    Li, Yanjun
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 : 782 - 793
  • [44] Microstructure and mechanical properties of the Mg-Gd-Y-Zn-Zr alloy fabricated by semi-continuous casting
    Xu, C.
    Zheng, M. Y.
    Chi, Y. Q.
    Chen, X. J.
    Wu, K.
    Wang, E. D.
    Fan, G. H.
    Yang, P.
    Wang, G. J.
    Lv, X. Y.
    Xu, S. W.
    Kamado, S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 549 : 128 - 135
  • [45] Wire-arc additive manufacturing of Mg-Gd-Y-Zn-Zr alloy: Microstructure and mechanical properties
    Zhang, Ce
    Ju, Ruifeng
    Li, Yunlong
    Zhao, Zhanyong
    Wang, Liqing
    Ma, Kai
    Zhang, Dongdong
    Zhang, Zhen
    Bai, Peikang
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 32 : 3083 - 3092
  • [46] Effect of Heat Treatments on the Corrosion Resistance of a High Strength Mg-Gd-Y-Zn-Zr Alloy
    Xu, Hang
    Li, Yuan
    Wu, Luoyi
    Jiang, Fulin
    Fu, Dingfa
    Teng, Jie
    Zhang, Hui
    MATERIALS, 2022, 15 (08)
  • [47] The microstructure and mechanical properties of Mg-Gd-Y-Zn-Zr system and Mg-Gd-Y-Zr system alloys by RUE deformation
    Jia, Leichen
    Yu, Jianmin
    Xu, Wenlong
    Wu, Guoqin
    Xia, Qing
    Zhang, Zhimin
    MATERIALS RESEARCH EXPRESS, 2021, 8 (03)
  • [48] A New Axial Upsetting Process for Large Ingots with Large Ratio of Height to Diameter
    Lan, Jian
    Li, Chengding
    Qiu, Yulong
    Hua, Lin
    MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 2684 - +
  • [49] Effect of aging treatment on the precipitation transformation and age hardening of Mg-Gd-Y-Zn-Zr alloy
    Mu Meng
    Honglei Zhang
    Zhi Gao
    Genxing Lei
    Jianmin Yu
    Journal of Magnesium and Alloys, 2023, (12) : 4628 - 4643
  • [50] Effects of friction stir process and subsequent aging treatment on the microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy
    Li, Bing
    Hou, Xiangwu
    Teng, Bugang
    MATERIALS CHARACTERIZATION, 2019, 155
12345