STUDY ON CORROSION BEHAVIOR OF Q235 STEEL AND 16MN STEEL BY ELECTROCHEMICAL AND WEIGHT LOSS METHOD

被引:1
|
作者
Quan, Bianli [1 ]
Xie, Zhiping [2 ]
机构
[1] Guizhou Univ, Coll Mat & Met, Guiyang 550025, Guizhou, Peoples R China
[2] Guizhou Normal Univ, Sch Mech & Elect Engn, Guiyang 550025, Peoples R China
关键词
Q235; steel; 16Mn steel; Sulfur; Corrosion mechanism; Alkaline solution; DUPLEX STAINLESS-STEEL; LOW-ALLOY STEEL; CARBON-STEEL; TEMPERATURE; ENVIRONMENT; CHLORIDES;
D O I
10.24425/amm.2023.142432
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
This study investigates the corrosion characteristics of Q235 steel and 16Mn steel in the sulfur-containing alkaline solution. The composition and the morphology of the corrosion products were analyzed by XPS and SEM respectively. The electrochemical behavior of Q235 steel and 16Mn steel was evaluated by potentiodynamic polarization curve and EIS. The results indicated that the corrosion rate of Q235 steel is greater than 16Mn steel in the early corrosion. Pitting and selective corrosion appeared on the surface of the two steels, and the surface product layer was granular and defective. XPS and EDS indicate that the structurally stable iron oxide is formed on the surface of the two steels. Electrochemical results show the corrosion kinetics of Q235 steel and 16Mn steel are simultaneously controlled by the charge transfer and ion diffusion, and the formation mechanism of corrosion products was clarified.
引用
收藏
页码:531 / 540
页数:10
相关论文
共 50 条
  • [31] Effect of AC current on corrosion behavior of cathodically protected Q235 steel
    Tang, D. Z.
    Du, Y. X.
    Lu, M. X.
    Jiang, Z. T.
    Dong, L.
    Wang, J. J.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2015, 66 (03): : 278 - 285
  • [32] Surface Characterization and Erosion–Corrosion Behavior of Q235 Steel in Dynamic Flow
    Qin-Ying Wang
    Shu-Lin Bai
    Zong-De Liu
    Tribology Letters, 2014, 53 : 271 - 279
  • [33] A comparative study on the corrosion behavior of Q235 steel in saturated acidic red and yellow soils
    Li, Yingying
    Liu, Lanlan
    Wang, Jun
    Xu, Song
    Su, Hui
    Xie, Yi
    Wu, Tangqing
    ANTI-CORROSION METHODS AND MATERIALS, 2025, 72 (02) : 161 - 169
  • [34] 16Mn钢板与Q235钢板焊接的实践
    刘金辉
    赵志刚
    胡伟
    河北冶金, 2005, (03) : 42 - 43
  • [35] Study on Corrosion Protectionof Q235 Steel inSimulatedSoilion of Q235 Steel in Simulated Soil PoreSolution by Different ElectrodepositedCoatingsPore Solution by Different Electrodeposited Coatings
    Zou, Junwen
    Zhao, Zhoufeng
    Zhang, Jie
    Zhou, Zhen
    Xu, Sheng
    Ye, Bo
    Zhang, Jun
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2022, 17 (12):
  • [36] The influence of sulphate-reducing bacteria on heterogeneous electrochemical corrosion behavior of Q235 carbon steel in seawater
    Chen, S. -Q.
    Wang, P.
    Zhang, D.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2016, 67 (04): : 340 - 351
  • [37] Assessment on Corrosion Behavior of Q235 Steel in a Simulated Concrete Pore Liquid Containing Chloride by Electrochemical Noise
    Tang R.
    Liu G.
    Liu Y.
    Shi C.
    Zhang B.
    Tian J.
    Gan H.
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2021, 35 (07): : 526 - 534
  • [38] EFFECT OF AC CURRENT ON CORROSION POTENTIAL OF Q235 STEEL
    Jiang Zitao
    Du Yanxia
    Dong Liang
    Lu Minxu
    ACTA METALLURGICA SINICA, 2011, 47 (08) : 997 - 1002
  • [39] Simulated Corrosion Test of Q235 Steel in Diatomite Soil
    Li, Jian
    Su, Hang
    Chai, Feng
    Chen, Xiao-ping
    Li, Xiang-yang
    Meng, Hui-min
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2015, 22 (04) : 352 - 360
  • [40] Influence of AC interference to corrosion of Q235 carbon steel
    Li, Y. T.
    Li, X.
    Cai, G. W.
    Yang, L. H.
    CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2013, 48 (05) : 322 - 326