Formability Behavior of the Ultrafine Grained Thin-Walled Tubes During Square-Sectional Hydroforming Process

被引：0

作者：

Abdolvand, H. ^{[1
]}

Ensafi, M. ^{[2
]}

Faraji, G. ^{[2
]}

机构：

[1] Louisiana State Univ, Mech & Ind Engn Dept, Baton Rouge, LA 70803 USA

[2] Univ Tehran, Coll Engn, Sch Mech Engn, Tehran 111554563, Iran

来源：

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2023年 / 76卷 / 10期

关键词：

UFG tube; Severe plastic deformation; PTCAP; Hydroforming process; MECHANICAL-PROPERTIES; MICROSTRUCTURE; CORNER; PRESSURE;

D O I：

10.1007/s12666-023-02969-3

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In the present study, formability of the ultrafine grained (UFG) Cu-Zn tubes were investigated during hydroforming process. The coarse-grained brass tubes were processed by the parallel tubular channel angular pressing (PTCAP) resulting in significant grain refinement. Then, coarse grained and UFG tubes were processed in a square-sectional hydroforming die. The results showed that the UFG tubes due to the lower formability and higher strength had a larger corner radius which was 6.35 mm while it was 1.9 mm for the annealed tube which is in good agreement with the tensile test data. Thickness distribution of the tubes were also examined through FEM simulation, and it was compared with the experimental data. SEM micrography was applied to evaluate fracture surface of the tubes after bursting.

引用

页码：2783 / 2790

页数：8

共 50 条

[31] Energy absorption of thin-walled square tubes designed by kirigami approach
Ming, Shizhao
Zhou, Caihua
Li, Tong
Song, Zhibo
Wang, Bo
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2019, 157 : 150 - 164
[32] STABILITY OF THIN-WALLED SQUARE TUBES WITH INTERMEDIATE STIFFENERS UNDER TORSION
Kolakowski, Zbigniew
Jankowski, Jacek
JOURNAL OF THEORETICAL AND APPLIED MECHANICS, 2019, 57 (03) : 655 - 663
[33] Bending resistance of thin-walled multi-cell square tubes
Wang, Zong
Li, Zhenhuan
Zhang, Xiong
THIN-WALLED STRUCTURES, 2016, 107 : 287 - 299
[34] Local buckling of square thin-walled steel tubes filled with concrete
Bridge, RQ
OShea, MD
5TH INTERNATIONAL COLLOQUIUM ON STABILITY OF METAL STRUCTURES - NORTH AMERICAN SESSION IN CONJUNCTION WITH ASCE STRUCTURES CONGRESS: FUTURE DIRECTION IN STABILITY RESEARCH & DESIGN, PROCEEDINGS, 1996, : 63 - 72
[35] On folding mechanics of multi-cell thin-walled square tubes
Wang, Zhonggang
Liu, Jiefu
Yao, Song
COMPOSITES PART B-ENGINEERING, 2018, 132 : 17 - 27
[36] Energy absorption of axially compressed thin-walled square tubes with patterns
Zhang, Xiong
Cheng, Gengdong
You, Zhong
Zhang, Hui
THIN-WALLED STRUCTURES, 2007, 45 (09) : 737 - 746
[37] Response of filled thin-walled square tubes to axial impact load
20143017974282
(1) Blast Impact and Survivability Research Unit (BISRU) Department of Mechanical Engineering, University of Cape Town, Private Bag, 7701 Rondebosch, Cape Town, South Africa, 1600, 'Commemorative Organization for the Japan World Exposition('70)'; CAE Solutions Co. Ltd.; Graduate School of Engineering Science of Osaka University; The Japanese Society for Experimental Mechanics (JSEM); The Society of Materials Science, Japan (JSMS) (Trans Tech Publications Ltd):
[38] Crashworthiness of Bio-inspired Hierarchical Thin-walled Square Tubes
Bai Z.-H.
Zhou C.-W.
Gong C.
Zhang L.-W.
Tan W.-X.
Bu X.-B.
Zhongguo Gonglu Xuebao/China Journal of Highway and Transport, 2020, 33 (01): : 181 - 190
[39] BI-AXIAL BENDING COLLAPSE OF SQUARE THIN-WALLED SECTION TUBES
TODOROVSKAAZIEVSKA, L
ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK, 1988, 68 (05): : T422 - T424
[40] The static and dynamic axial crumbling of thin-walled fibreglass composite square tubes
Mamalis, AG
Manolakos, DE
Demosthenous, GA
Ioannidis, MB
COMPOSITES PART B-ENGINEERING, 1997, 28 (04) : 439 - 451

← 1 2 3 4 5 →