Correction to: Parametric optimization and process capability analysis for machining of nickel-based superalloy

被引：2

作者：

Gupta, Munish Kumar ^{[1
]}

Mia, Mozammel ^{[2
]}

Pruncu, Catalin I. ^{[3
,4
]}

Kaplonek, Wojciech ^{[5
]}

Nadolny, Krzysztof ^{[5
]}

Patra, Karali ^{[6
]}

Mikolajczyk, Tadeusz ^{[7
]}

Pimenov, Daniil Yu. ^{[8
]}

Sarikaya, Murat ^{[9
]}

Sharma, Vishal S. ^{[10
]}

机构：

[1] Chandigarh Univ, Dept Mech Engn, Gharuan, Punjab, India

[2] Ahsanullah Univ Sci & Technol, Mech & Prod Engn, Dhaka 1208, Bangladesh

[3] Imperial Coll London, Mech Engn, Exhibition Rd, London SW7 2AZ, England

[4] Univ Birmingham, Sch Engn, Mech Engn, Birmingham B15 2TT, England

[5] Koszalin Univ Technol, Fac Mech Engn, Dept Prod Engn, Raclawicka 15-17, PL-75620 Koszalin, Poland

[6] Indian Inst Technol Patna, Dept Mech Engn, Bihta 801103, Patna, India

[7] UTP Univ Sci & Technol, Dept Prod Engn, Al Prof S Kaliskiego 7, PL-75620 Bydgoszcz, Poland

[8] South Ural State Univ, Dept Automated Mech Engn, Lenin Prosp 76, Chelyabinsk 454080, Russia

[9] Sinop Univ, Dept Mech Engn, Sinop, Turkey

[10] B R Ambedkar Natl Inst Technol, Dept Ind & Prod Engn, Jalandhar 144011, India

来源：

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2023年 / 124卷 / 3-4期

关键词：

D O I：

10.1007/s00170-022-10571-y

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

引用

页码：1337 / 1338

页数：2

共 50 条

[31] Experimental evaluation of surface quality characteristics in laser machining of nickel-based superalloy
Khan, Adam M.
Gupta, Kapil
OPTIK, 2019, 196
[32] An experimental investigation of deep-hole microdrilling capability for a nickel-based superalloy
Imran, M.
Mativenga, P. T.
Kannan, S.
Novovic, D.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2008, 222 (12) : 1589 - 1596
[33] Modeling analysis of laser cladding of a nickel-based superalloy
Nie, Pulin
Ojo, O. A.
Li, Zhuguo
SURFACE & COATINGS TECHNOLOGY, 2014, 258 : 1048 - 1059
[34] ANALYSIS OF SURFACE TOPOGRAPHY AFTER MICRO-WIRE ELECTRICAL DISCHARGE MACHINING OF NICKEL-BASED SUPERALLOY
Oniszczuk-Swiercz, Dorota
Swiercz, Rafal
Rempalska, Marta
Kowalik, Tadeusz
31ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, METAL 2022, 2022, : 518 - 523
[35] The temperature process analysis and control on laser-assisted milling of nickel-based superalloy
Wu, Xuefeng
Chen, Jianfeng
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 98 (1-4): : 223 - 235
[36] The temperature process analysis and control on laser-assisted milling of nickel-based superalloy
Xuefeng Wu
Jianfeng Chen
The International Journal of Advanced Manufacturing Technology, 2018, 98 : 223 - 235
[37] The temperature process analysis and control on laser-assisted milling of nickel-based superalloy
Wu, Xuefeng (wuxuefeng@hrbust.edu.cn), 2018, Springer London (98): : 1 - 4
[38] Machining nickel-based superalloys
Konig, W
Gerschwiler, K
MANUFACTURING ENGINEERING, 1999, 122 (03): : 102 - +
[39] Study on Influences of Milling Process Optimization on Residual Stress Distribution for Machining Nickel-based Superalloys
Zhang J.
Xu W.
Wang X.
Jiang X.
Gao S.
Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2024, 35 (04): : 624 - 635
[40] Optimization of electrochemical micromachining microstructures on nickel-based superalloy with sinusoidal signal
Wang, Xin
Peng, Yan
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 134 (7-8): : 3551 - 3560

← 1 2 3 4 5 →