Investigation on tribo-characteristics of electrochemical jet machined part manufactured by laser powder bed fusion

被引：1
|
作者：
Kumar, Pravin [1 ]
Chaudhary, Bhavesh [2 ]
Jain, N. K. [2 ]
Patel, Mahesh [3 ]
Dixit, Pradeep [1 ]
机构：
[1] Indian Inst Technol, Dept Mech Engn, Electrochem Microfabricat Lab, Mumbai 400076, India
[2] Dept Mech Engn, Simrol, India
[3] Indian Inst Technol Indore, Dept Met Engn & Mat, Simrol 453552, India
来源：
TRIBOLOGY INTERNATIONAL | 2023年 / 188卷
关键词：
Laser powder bed fusion; Non-conventional machining; Electrochemical jet machining; Surface finish; Wear; SURFACE; SPATTER; MECHANISMS; COMPONENTS; ROUGHNESS; STEEL;
D O I：
10.1016/j.triboint.2023.108766
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Electrochemical jet machining (ECJM) is a toolless electrochemical-based material removal process suitable for finishing the Laser powder bed fusion (L-PBF) manufactured parts. However, the investigation of the tribological characteristics of the finished part is unknown. Therefore, in this article, an investigation was made to evaluate the tribological characteristics of the electrochemical jet machined surface of SS316L part produced by L-PBF. The experimental results revealed improvement in the roughness parameters after the ECJM. The wear tests revealed that the friction coefficients (COF) of the finished samples were significantly lower in comparison to the as-manufactured samples. During the investigation, the dominating mechanisms of the wear were found to be adhesive and delamination wear.
引用
收藏
页数：16
相关论文
共 50 条
  • [1] Energy Density Effect on the Interface Zone in Parts Manufactured by Laser Powder Bed Fusion on Machined Bases
    Marin, Felipe
    de Souza, Adriano Fagali
    Mikowski, Alexandre
    Guarnieri Fontanella, Luis Henrique
    Soares, Paulo
    Lopez de Lacalle, Luis Norberto
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, 2023, 10 (04) : 905 - 923
  • [2] Energy Density Effect on the Interface Zone in Parts Manufactured by Laser Powder Bed Fusion on Machined Bases
    Felipe Marin
    Adriano Fagali de Souza
    Alexandre Mikowski
    Luís Henrique Guarnieri Fontanella
    Paulo Soares
    Luis Norberto López de Lacalle
    International Journal of Precision Engineering and Manufacturing-Green Technology, 2023, 10 : 905 - 923
  • [3] Electrochemical properties of graphite/nylon electrodes additively manufactured by laser powder bed fusion
    Pastushok, Olga
    Kivijarvi, Lauri
    Laakso, Ekaterina
    Haukka, Matti
    Piili, Heidi
    Repo, Eveliina
    ELECTROCHIMICA ACTA, 2023, 440
  • [4] Correction: Energy Density Effect on the Interface Zone in Parts Manufactured by Laser Powder Bed Fusion on Machined Bases
    Felipe Marin
    Adriano Fagali de Souza
    Alexandre Mikowski
    Luís Henrique Guarnieri Fontanella
    Paulo Soares
    Luis Norberto López de Lacalle
    International Journal of Precision Engineering and Manufacturing-Green Technology, 2023, 10 : 1139 - 1139
  • [5] Investigation on the characteristics of porosity, melt pool in 316L stainless steel manufactured by laser powder bed fusion
    Liu, Cheng-song
    Xue, Xiao
    Wang, Yong
    Zhang, Hua
    Li, Jie
    Lu, Yuan-yuan
    Xiong, Li
    Ni, Hong-wei
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 32 : 1832 - 1844
  • [6] On the role of carbon in molybdenum manufactured by Laser Powder Bed Fusion
    Braun, J.
    Kaserer, L.
    Letofsky-Papst, I.
    Leitz, K. -H.
    Kestler, H.
    Leichtfried, G.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2020, 92
  • [7] Electric Aerospace Actuator Manufactured by Laser Powder Bed Fusion
    Lizarribar, Borja
    Prieto, Borja
    Aristizabal, Miren
    Martin, Jose Manuel
    Martinez-Iturralde, Miguel
    San Jose, Ekain
    Golvano, Ione
    Montes, Sergio
    Kourousis, Kyriakos I.
    AEROSPACE, 2023, 10 (09)
  • [8] An investigation into the effect of CoCrMo powder characteristics on the powder bed density in laser-based powder bed fusion units
    Kloppers, Cornelius P.
    de Beer, Deon J.
    RAPID PROTOTYPING JOURNAL, 2024, 30 (11) : 335 - 343
  • [9] Micropillar compression investigation on the mechanical behavior of Ni manufactured using laser powder bed fusion
    Li, Shi-Hao
    Zhao, Yakai
    Lau, Kwang Boon
    Wang, Pei
    Upadrasta, Ramamurty
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 879
  • [10] Effect of current density on electrochemical machining process of laser powder bed fusion manufactured Inconel 718
    Guo, Pengfei
    Martin, Andre
    Zhai, Changshuai
    Li, Zuo
    Lu, Xufei
    Yu, Jun
    Lin, Xin
    Odnevall, Inger
    Gibbons, Michael
    Schubert, Andreas
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2025, 337
12345