Effect of anodizing time on the hardness and tribological properties of Ti-6Al-4V

被引：0
|
作者：
Rodriguez-Jimenez, R. C. [1 ]
Hernandez-Torres, J. [1 ]
Santaella-Gonzalez, J. B. [2 ]
Muhl, S. [3 ]
Lopez-Velazquez, A. [4 ]
Zamora-Peredo, L. [1 ]
Garcia-Gonzalez, L. [1 ]
机构：
[1] Univ Veracruzana, Ctr Invest Micro & Nanotecnol, Boca Del Rio 94294, Veracruz, Mexico
[2] Univ Veracruzana, Fac Ciencias Quim, Boca Del Rio 94294, Veracruz, Mexico
[3] Inst Invest Mat UNAM, Mexico City, Mexico
[4] Univ Veracruzana, Fac Ingn Mecan Elect, Xalapa 91000, Veracruz, Mexico
来源：
MRS ADVANCES | 2023年 / 8卷 / 20期
关键词：
Compilation and indexing terms; Copyright 2025 Elsevier Inc;
D O I：
10.1557/s43580-023-00698-9
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Electrochemical anodization of the Ti-6Al-4V alloy was performed using two types of organic electrolytes, one of NH4F in ethylene glycol and the other of NH4F in glycerol. The anodization times and voltages were varied to observe changes in the hardness and friction coefficients. Hardness values of 4.14 GPa and 4.68 GPa were achieved for ethylene glycol and glycerol, respectively. Relative to the untreated alloy the friction coefficient decreased to a value of 0.45 for both electrolytes. These improvements are attributed to the formation of TiO2 nanotubes with diameters ranging from 27 to 86 nm.
引用
收藏
页码：1103 / 1106
页数：4
相关论文
共 50 条
  • [41] Effect of Heat Treatment Temperature on Microstructure and Mechanical and Tribological Properties of Cold Sprayed Ti-6Al-4V Coatings
    Khun, N. W.
    Tan, A. W. Y.
    Sun, W.
    Liu, E.
    TRIBOLOGY TRANSACTIONS, 2017, 60 (06) : 1033 - 1042
  • [42] STRUCTURE AND PITTING CORROSION OF Ti-6Al-4V ALLOY AND Ti-6Al-4V WELDS
    Ferdinandov, Nikolay Vasilev
    Gospodinov, Danail Dimitrov
    Ilieva, Mariana Dimitrova
    Radev, Rossen Hristov
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND SYSTEMS, 2018, : 325 - 330
  • [43] PROPERTIES OF CENTRIFUGALLY CAST COMMERCIAL TI AND TI-6AL-4V
    GREENER, EH
    MOSER, JB
    OPP, J
    SZURGOT, K
    MARKER, BC
    JOURNAL OF DENTAL RESEARCH, 1986, 65 : 317 - 317
  • [44] Effect of microstructure on mechanical properties and topography of a Ti-6Al-4V alloy
    Azkarate, I.
    Gil-Negrete, A.
    Irisarri, A.M.
    Revista de Metalurgia (Madrid), 1988, 24 (06): : 372 - 378
  • [45] Effect of anisotropy on mechanical properties of Ti-6Al-4V in superplastic region
    Wahed, M. A.
    Gupta, A. K.
    Singh, S. K.
    Kotkunde, N.
    INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS & MANUFACTURING TECHNOLOGIES, 2018, 346
  • [46] The effect of welded microstructure on ballistic properties of Ti-6Al-4V plates
    Kosaka, Y
    Daggett, M
    Bristow, B
    Johnson, G
    Reichman, S
    Burkins, M
    NON-AEROSPACE APPLICATIONS OF TITANIUM, 1998, : 281 - 288
  • [47] THE EFFECT OF COLD-ROLLING ON THE FATIGUE PROPERTIES OF TI-6AL-4V
    LIU, SZ
    MINAKAWA, K
    SCHOLTES, B
    MCEVILY, AJ
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1985, 16 (01): : 144 - 145
  • [48] Effect of porosity on mechanical and electrochemical properties of Ti-6Al-4V alloy
    Martinez, Carola
    Guerra, Carolina
    Silva, Daniela
    Cubillos, Mariela
    Briones, Francisco
    Munoz, Lisa
    Paez, M. A.
    Aguilar, Claudio
    Sancy, Mamie
    ELECTROCHIMICA ACTA, 2020, 338
  • [49] Effect of stress ratio on fatigue properties for Ti-6Al-4V alloy
    Takeuchi, Etsuo
    Furuya, Yoshiyuki
    Nagashima, Nobuo
    Matsuoka, Saburo
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2007, 93 (04): : 309 - 316
  • [50] Effect of microstructure on the fatigue properties of Ti-6Al-4V titanium alloys
    Wu, G. Q.
    Shi, C. L.
    Sha, W.
    Sha, A. X.
    Jiang, H. R.
    MATERIALS & DESIGN, 2013, 46 : 668 - 674
12345