Effect of anodizing time on the hardness and tribological properties of Ti-6Al-4V

被引：0
|
作者：
Rodriguez-Jimenez, R. C. [1 ]
Hernandez-Torres, J. [1 ]
Santaella-Gonzalez, J. B. [2 ]
Muhl, S. [3 ]
Lopez-Velazquez, A. [4 ]
Zamora-Peredo, L. [1 ]
Garcia-Gonzalez, L. [1 ]
机构：
[1] Univ Veracruzana, Ctr Invest Micro & Nanotecnol, Boca Del Rio 94294, Veracruz, Mexico
[2] Univ Veracruzana, Fac Ciencias Quim, Boca Del Rio 94294, Veracruz, Mexico
[3] Inst Invest Mat UNAM, Mexico City, Mexico
[4] Univ Veracruzana, Fac Ingn Mecan Elect, Xalapa 91000, Veracruz, Mexico
来源：
MRS ADVANCES | 2023年 / 8卷 / 20期
关键词：
Compilation and indexing terms; Copyright 2025 Elsevier Inc;
D O I：
10.1557/s43580-023-00698-9
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Electrochemical anodization of the Ti-6Al-4V alloy was performed using two types of organic electrolytes, one of NH4F in ethylene glycol and the other of NH4F in glycerol. The anodization times and voltages were varied to observe changes in the hardness and friction coefficients. Hardness values of 4.14 GPa and 4.68 GPa were achieved for ethylene glycol and glycerol, respectively. Relative to the untreated alloy the friction coefficient decreased to a value of 0.45 for both electrolytes. These improvements are attributed to the formation of TiO2 nanotubes with diameters ranging from 27 to 86 nm.
引用
收藏
页码：1103 / 1106
页数：4
相关论文
共 50 条
  • [1] Effect of anodizing time on the hardness and tribological properties of Ti–6Al–4V
    R. C. Rodríguez-Jiménez
    J. Hernández-Torres
    J. B. Santaella-González
    S. Muhl
    A. López-Velázquez
    L. Zamora-Peredo
    L. García-González
    MRS Advances, 2023, 8 : 1103 - 1106
  • [2] Effect of Coloring by Anodizing on the Corrosion Behavior of Ti-6Al-4V Alloy
    Saraswati, Wardah Citra
    Anawati, Anawati
    Jujur, I. Nyoman
    Gumelar, Muhammad Dikdik
    PROCEEDINGS OF THE 3RD INTERNATIONAL SEMINAR ON METALLURGY AND MATERIALS (ISMM 2019): EXPLORING NEW INNOVATION IN METALLURGY AND MATERIALS, 2020, 2232
  • [3] Tribological properties of Al/PI composites sliding with Ti-6Al-4V alloy
    Liu, Ruoyu
    Huang, Chuanbing
    Du, Lingzhong
    Lan, Hao
    Fang, Shige
    Zhang, Weigang
    MATERIALS RESEARCH EXPRESS, 2019, 6 (10):
  • [4] A comparative study:: The effect of surface treatments on the tribological properties of Ti-6Al-4V alloy
    Yetim, A. F.
    Alsaran, A.
    Efeoglu, I.
    Celik, A.
    SURFACE & COATINGS TECHNOLOGY, 2008, 202 (11): : 2428 - 2432
  • [5] THE EFFECT OF LASER SURFACE TREATMENTS ON THE TRIBOLOGICAL BEHAVIOR OF TI-6AL-4V
    YERRAMAREDDY, S
    BAHADUR, S
    WEAR, 1992, 157 (02) : 245 - 262
  • [6] Effect of hot deformation on the tribological behaviour of Ti-6Al-4V alloy
    Ismail, A.
    Abdel-Aziz, M.
    El-Morsy, A.
    El-Bitar, T.
    CANADIAN METALLURGICAL QUARTERLY, 2006, 45 (04) : 469 - 473
  • [7] The effect of laser surface texturing on the tribological behavior of Ti-6Al-4V
    Hu, Tianchang
    Hu, Litian
    Ding, Qi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2012, 226 (J10) : 854 - 863
  • [8] Effect of mean stress on fretting fatigue of Ti-6Al-4V on Ti-6Al-4V
    Lovrich, NR
    Neu, RW
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2006, 29 (01) : 41 - 55
  • [9] Tribological performance of laser peened Ti-6Al-4V
    Kumar, Dharmesh
    Akhtar, Syed Nadeem
    Patel, Anup Kumar
    Ramkumar, J.
    Balani, Kantesh
    WEAR, 2015, 322 : 203 - 217
  • [10] Time dependence of microstructure and hardness in plasma carbonized Ti-6Al-4V alloys
    Xing, Ya-Zhe
    Jiang, Chao-Ping
    Hao, Jian-Min
    VACUUM, 2013, 95 : 12 - 17
12345