Experimental study of off-axis compression behaviour in dynamic loading: The open hole effect

被引：2
|
作者：
Rodriguez-Sereno, J. M. [1 ]
Pernas-Sanchez, J. [1 ]
Artero-Guerrero, J. A. [1 ]
Lopez-Puente, J. [1 ]
Lukic, B. [2 ]
机构：
[1] Univ Carlos III Madrid, Dept Continuum Mech & Struct Anal, Ave Univ 30, Madrid 28911, Spain
[2] European Synchrotron Radiat Facil, CS40220, F-38043 Grenoble 9, France
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2023年 / 173卷
基金：
瑞典研究理事会;
关键词：
Strain rate effects; Split Hopkinson pressure bar; Open hole compression; Woven; RATE-DEPENDENT BEHAVIOR; STRAIN RATE BEHAVIOR; FAILURE CRITERIA; WOVEN COMPOSITE; PART I; IMPACT; MODEL; DEFORMATION; STRENGTH; TESTS;
D O I：
10.1016/j.compositesa.2023.107653
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of the open hole on the behaviour of carbon fibre reinforced polymer composites (CFRP) under compressive dynamic loading was investigated. To this end, two different set-ups (quasi-static and dynamic) for compression loading were developed. The un-notched plain woven CFRP (AS4 fibres and 8552 matrix) studied in this work was characterized in terms of apparent strength at different off-axis angles at compression loading. The maximum stress criterion was found to be the model which better represents the transverse-shear failure points of the woven composite. Later the effect of the open hole in similar samples were studied, concluding that the hole effect has more impact on the strength for samples with the fibre align with the load. A modification of the Lekhnitskii theory has been proposed in order to take into account the non-linearity of the material and to unveil its role in open hole specimens.
引用
下载
收藏
页数：14
相关论文
共 50 条
  • [21] Characterisation of mechanical behaviour of fibre reinforced thermoplastic composites subjected to off-axis compressive loading
    Ma, Y.
    Li, Y.
    Liu, L.
    REVISTA INTERNACIONAL DE METODOS NUMERICOS PARA CALCULO Y DISENO EN INGENIERIA, 2023, 39 (01):
  • [22] Overall buckling behaviour of laminated CFRP tubes with off-axis ply orientation in axial compression
    Zhu, Ruijie
    Li, Feng
    Zhang, Dongdong
    SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 2019, 26 (01) : 230 - 239
  • [23] A parametric study of fiber volume fraction distribution on the failure initiation location in open hole off-axis tensile specimen
    Jasso, Alvaro J. Mendoza
    Goodsell, Johnathan E.
    Ritchey, Andrew J.
    Pipes, R. Byron
    Koslowski, Marisol
    COMPOSITES SCIENCE AND TECHNOLOGY, 2011, 71 (16) : 1819 - 1825
  • [24] Studies on the off-axis high strain rate compression loading of satin weave carbon/epoxy composites
    Hosur, MV
    Alexander, J
    Vaidya, UK
    Jeelani, S
    Mayer, A
    COMPOSITE STRUCTURES, 2004, 63 (01) : 75 - 85
  • [25] Experimental and analytical study on unidirectional and off-axis GFRP rebars in concrete
    Kachlakev, DI
    COMPOSITES PART B-ENGINEERING, 2000, 31 (6-7) : 569 - 575
  • [26] Quantitative phase microscopy of dynamic cells using off-axis holographic compression by spatial multiplexing
    Shaked, Natan T.
    UNCONVENTIONAL OPTICAL IMAGING, 2018, 10677
  • [27] Compressive damage mechanism of GFRP composites under off-axis loading: Experimental and numerical investigations
    Zhou, H. W.
    Yi, H. Y.
    Gui, L. L.
    Dai, G. M.
    Peng, R. D.
    Wang, H. W.
    Mishnaevsky, Leon, Jr.
    COMPOSITES PART B-ENGINEERING, 2013, 55 : 119 - 127
  • [28] Experimental analysis of off-axis mechanical behaviors of PVC coated fabrics subjected to cyclic loading
    Xu, Junhao
    Zhang, Yingying
    Wu, Meng
    Zhao, Yushuai
    POLYMER TESTING, 2019, 80
  • [29] Response of cross-ply composite to off-axis loading
    Tamuzs, V
    Andersons, J
    Sparnins, E
    Varna, J
    JOURNAL OF COMPOSITE MATERIALS, 2002, 36 (18) : 2125 - 2134
  • [30] Micromechanical modeling of fiber composites under off-axis loading
    Zhu, CM
    Sun, CT
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2003, 16 (04) : 333 - 344
12345