Practical revision of error separation technique to improve cylindricity measurement

被引：0
|
作者：
Toledo, Augusto Maury [1 ]
Lorenzo, Jose Luis Castaneda [2 ]
机构：
[1] MESS Serv Metrol S RL CV, Queretaro 76120, Mexico
[2] Univ La Habana, Fac Matemat & Comp, Havana 10400, Cuba
来源：
MEASUREMENT | 2023年 / 211卷
关键词：
Cylindricity; Minimization; Uncertainty; Separation technique;
D O I：
10.1016/j.measurement.2023.112608
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Theoretic aspects of error separation techniques or reversal methods are widely described in literature to remove the instrument component and isolate the desire characteristic. However, the mathematical step by step procedure strongly depend of the measurand and measurements; and is not frequently found. This paper proposes an approach to design and process cylindricity measurements of cylindrical standards, through an error separation technique; given a detailed mathematical development and assumptions, and the impact of the later ones in the measurement uncertainty. Also, an analysis of the uncertainty estimation budget is made, through which the improvement of the method can be observed. © 2023 Elsevier Ltd
引用
收藏
页数：9
相关论文
共 50 条
  • [31] Single-step spatial rotation error separation technique for the ultraprecision measurement of surface profiles
    Hou, Maosheng
    Qiu, Lirong
    Zhao, Weiqian
    Wang, Fan
    Liu, Entao
    Ji, Lin
    [J]. APPLIED OPTICS, 2014, 53 (03) : 487 - 495
  • [32] FULL-HARMONIC ERROR SEPARATION TECHNIQUE
    CAO, LX
    WANG, H
    LI, XG
    SHEN, QH
    [J]. MEASUREMENT SCIENCE AND TECHNOLOGY, 1992, 3 (12) : 1129 - 1132
  • [33] Error separation method for bevel gear measurement
    Wang, Zhi
    Wang, Guicheng
    Xie, Huakun
    [J]. Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery, 2005, 36 (09): : 128 - 130
  • [34] An error separation technique for measuring straightness motion error of a linear slide
    Fung, EHK
    Yang, SM
    [J]. MEASUREMENT SCIENCE AND TECHNOLOGY, 2000, 11 (10) : 1515 - 1521
  • [35] High-resolution error separation technique for in-situ straightness measurement of machine tools and workpieces
    Li, CJ
    Li, SY
    Yu, JM
    [J]. MECHATRONICS, 1996, 6 (03) : 337 - 347
  • [36] FOCUS ERROR MEASUREMENT SYSTEM: PRACTICAL DESIGN CONSIDERATIONS
    Escola, F. Zaldivar
    [J]. ANALES AFA, 2023, 33 (04): : 90 - 98
  • [37] Practical investigations in the reduction of accelerometer measurement error.
    Lally, MJ
    Bono, RW
    Brown, DL
    [J]. PROCEEDINGS OF THE 15TH INTERNATIONAL MODAL ANALYSIS CONFERENCE - IMAC, VOLS I AND II, 1997, 3089 : 1244 - 1248
  • [38] Error correction technique for dynamic impedance measurement
    Quaresma, H
    Silva, AP
    Serra, AC
    [J]. IMTC/O3: PROCEEDINGS OF THE 20TH IEEE INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE, VOLS 1 AND 2, 2003, : 1009 - 1012
  • [39] Error correction technique for dynamic impedance measurement
    Quaresma, HJ
    Silva, AP
    Serra, AMC
    [J]. IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2005, 54 (03) : 1249 - 1253
  • [40] Universal technique for error correction in measurement system
    Abdullayev, Isa
    Allakhverdiyeva, Naila
    [J]. 7th International Conference on Measurement and Control of Granular Materials, Proceedings, 2006, : 71 - 74
12345