Practical revision of error separation technique to improve cylindricity measurement

被引：0
|
作者：
Toledo, Augusto Maury [1 ]
Lorenzo, Jose Luis Castaneda [2 ]
机构：
[1] MESS Serv Metrol S RL CV, Queretaro 76120, Mexico
[2] Univ La Habana, Fac Matemat & Comp, Havana 10400, Cuba
来源：
MEASUREMENT | 2023年 / 211卷
关键词：
Cylindricity; Minimization; Uncertainty; Separation technique;
D O I：
10.1016/j.measurement.2023.112608
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Theoretic aspects of error separation techniques or reversal methods are widely described in literature to remove the instrument component and isolate the desire characteristic. However, the mathematical step by step procedure strongly depend of the measurand and measurements; and is not frequently found. This paper proposes an approach to design and process cylindricity measurements of cylindrical standards, through an error separation technique; given a detailed mathematical development and assumptions, and the impact of the later ones in the measurement uncertainty. Also, an analysis of the uncertainty estimation budget is made, through which the improvement of the method can be observed. © 2023 Elsevier Ltd
引用
收藏
页数：9
相关论文
共 50 条
  • [1] Four-point error separation technique for cylindricity
    Liu, Wenwen
    Zeng, Hao
    Liu, Shanlin
    Wang, HongTao
    Chen, Wanyu
    [J]. MEASUREMENT SCIENCE AND TECHNOLOGY, 2018, 29 (07)
  • [2] Five-point cylindricity error separation technique
    Liu, Wenwen
    Fu, JunSen
    Wang, Biao
    Liu, Shanlin
    [J]. MEASUREMENT, 2019, 145 : 311 - 322
  • [3] A V-block three-probe error separation technique for portable measurement of cylindricity
    Liu, Wenwen
    Zhou, XuHuai
    Hu, Yi
    Hu, Penghao
    [J]. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2019, 59 : 37 - 46
  • [4] Reverse error separation method for the position error between references during the measurement of cylindricity
    Zhao, WQ
    Xue, Z
    Yang, WG
    Tan, JB
    [J]. PROCEEDINGS OF THE SECOND INTERNATIONAL SYMPOSIUM ON INSTRUMENTATION SCIENCE AND TECHNOLOGY, VOL 3, 2002, : 90 - 96
  • [5] Roundness Measurement and Error Separation Technique
    Ma Yu-zhen
    Wang Xin-hua
    Kang Yan-hui
    Dong Xiao
    [J]. SENSORS, MEASUREMENT AND INTELLIGENT MATERIALS, PTS 1-4, 2013, 303-306 : 390 - +
  • [6] AN ON-MACHINE MEASUREMENT SYSTEM FOR CYLINDRICITY ERROR
    Qian, Xiaoming
    Lou, Peihuang
    Bei, Guangxia
    [J]. 2011 INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND TECHNOLOGY (ICMET 2011), 2011, : 285 - 288
  • [7] Precision Cylindricity Error Measurement System Design and Error Analysis
    Ma, Xiqiang
    Yang, Fang
    Li, Jishun
    Guan, Zhiqiang
    Gurgenci, Hal
    [J]. 2019 13TH INTERNATIONAL CONFERENCE ON SENSING TECHNOLOGY (ICST), 2019,
  • [8] Evaluation of Cylindricity Error Based on Geometrical Approximation Technique
    He Gaiyun
    Zheng Huijiang
    Ding Baihui
    [J]. 2008 IEEE INTERNATIONAL CONFERENCE ON AUTOMATION AND LOGISTICS, VOLS 1-6, 2008, : 2655 - +
  • [9] High precision cylindricity - cylindrical form measurement technique
    McDonnell, IJ
    Scott, P
    [J]. PRECISION ENGINEERING, NANOTECHNOLOGY, VOL. 2, 1999, : 110 - 113
  • [10] Comparison of Current Five-Point Cylindricity Error Separation Techniques
    Liu, Wenwen
    Hu, Penghao
    Fan, Kuangchao
    [J]. APPLIED SCIENCES-BASEL, 2018, 8 (10):
12345