Influence of structural parameters of descaling nozzle on jet behavior

被引:2
|
作者
Yang, Bowen [1 ]
Liu, Guangqiang [2 ]
Zhang, Guoxin [1 ]
Liu, Kun [1 ]
Han, Peng [1 ]
机构
[1] Univ Sci & Technol Liaoning, Sch Mat & Met, Anshan 114051, Peoples R China
[2] Univ Sci & Technol Liaoning, Sch Civil Engn, Anshan 114051, Peoples R China
关键词
High pressure water; descaling nozzle; external jet; conical grooving; SIMULATION;
D O I
10.1051/metal/2024022
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Compared to alternative descaling methods, the high-pressure water descaling technology offers cheaper costs and higher descaling rate, which has obvious advantages. As a key component, the descaling nozzle will have a direct impact on the descaling effect. Based on the detailed study of the traditional U-shaped and V-shaped grooving methods, this paper discovered a conical curve grooving method where the grooving curve shape factor lies between those of the two aforementioned methods, and established a full-scale model of the descaling nozzle. For the conical groove nozzle, numerical Computational Fluid Dynamics (CFD) simulations were performed using the shape factor of the groove curve between 0 and 1 and the throat diameter between 2.1 and 2.4 mm. It has been determined that a descaling nozzle with the shape factor between 0.75 and 0.9 has superior dynamic performance, and that when the throat diameter is between 2.3 and 2.4 mm, the nozzle has a higher outlet average velocity and a reasonable outlet flow rate. In conclusion, the dimensionless functional relationship between taper shape factor, throat diameter, nozzle outlet average velocity, effective descaling width and area is established in order to provide certain theoretical support for various production requirements of nozzles.
引用
收藏
页数:10
相关论文
共 50 条
  • [31] Influence Analysis of Nozzle Position in Fluid Jet Polishing
    Wang Zhongyu
    Zhang Lianxin
    Sun Pengfei
    Li Jian
    OPTICAL MANUFACTURING AND TESTING XII, 2018, 10742
  • [32] Simulation of airflow motion in jet nozzle with different geometric parameters
    Zhu, Guo cheng
    Ibrahim, Sayed
    Militky, Jiri
    Wang, Yan
    Kremenakova, Dana
    ADVANCED MATERIALS AND ENGINEERING MATERIALS II, 2013, 683 : 869 - +
  • [33] Determination of the Water Jet Geometric Parameters Depending on the Type of Nozzle and Jet Operation Mode
    Shutenko, A. V.
    Khort, D. O.
    ENGINEERING TECHNOLOGIES AND SYSTEMS, 2024, 34 (01):
  • [34] Influence of Injection Distance on Water Droplet Behavior in High Pressure Descaling
    Tamura, Yuta
    Ueoka, Satoshi
    Kimura, Yukio
    Kabeya, Kazuhisa
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2018, 104 (10): : 53 - 60
  • [35] Combustion Behavior of Supersonic Jet for Single-Flow Postcombustion Oxygen Lance with Various Secondary Nozzle Parameters
    Dong, Pengyuan
    Zheng, Shuguo
    Zhu, Miaoyong
    STEEL RESEARCH INTERNATIONAL, 2024, 95 (09)
  • [36] Application of abrasive water jet descaling technology
    1600, Editorial Board of Mining Research and Development, Changsha, China (14):
  • [37] Influence of Injection Distance on Water Droplet Behavior in High Pressure Descaling
    Tamura, Yuta
    Ueoka, Satoshi
    Kimura, Yukio
    Kabeya, Kazuhisa
    ISIJ INTERNATIONAL, 2020, 60 (01) : 128 - 135
  • [38] DESCALING WITH A HYDRAULIC JET AND THE DESIGN OF NOZZLES.
    Gao Xin
    Kang T'ieh/Iron and Steel (Peking), 1982, 17 (07): : 28 - 33
  • [39] Efficiency Optimization of an Annular-Nozzle Air Ejector under the Influence of Structural and Operating Parameters
    Lysak, Ilya A.
    Lysak, Galina V.
    Konyukhov, Vladimir Yu.
    Stupina, Alena A.
    Gozbenko, Valeriy E.
    Yamshchikov, Andrei S.
    MATHEMATICS, 2023, 11 (14)
  • [40] Experiment and simulation research on abrasive water jet nozzle wear behavior and anti-wear structural improvement
    Chen, Xiaochen
    Deng, Songsheng
    Guan, Jinfa
    Hua, Weixing
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2017, 39 (06) : 2023 - 2033