A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract

被引:10
|
作者
Karabulut, Hatice [1 ,2 ]
Ulag, Songul [2 ,3 ]
Dalbayrak, Basak [4 ]
Arisan, Elif Damla [4 ]
Taskin, Turgut [5 ]
Guncu, Mehmet Mucahit [6 ]
Aksu, Burak [7 ]
Valanezhad, Alireza [8 ]
Gunduz, Oguzhan [2 ,3 ]
机构
[1] Marmara Univ, Inst Pure & Appl Sci Met & Mat Engn, TR-34722 Istanbul, Turkiye
[2] Marmara Univ, Ctr Nanotechnol & Biomat Applicat & Res, TR-34722 Istanbul, Turkiye
[3] Marmara Univ, Fac Technol, Dept Met & Mat Engn, TR-34722 Istanbul, Turkiye
[4] Gebze Tech Univ, Inst Biotechnol, TR-41400 Kocaeli, Turkiye
[5] Marmara Univ, Fac Pharm, Dept Pharmacognosy, TR-34668 Istanbul, Turkiye
[6] Marmara Univ, Inst Hlth Sci, Dept Microbiol, TR-34854 Istanbul, Turkiye
[7] Marmara Univ, Sch Med, Dept Med Microbiol, TR-34854 Istanbul, Turkiye
[8] Nagasaki Univ, Dept Dent & Biomed Mat Sci, Grad Sch Biomed Sci, Nagasaki 8528588, Japan
关键词
dental membrane; polyvinylalcohol; pomegranate; starch; scaffolds; 3D printing; PERIODONTAL REGENERATION; BONE REGENERATION; BARRIER; AUGMENTATION; TECHNOLOGY; PEEL;
D O I
10.3390/pharmaceutics15030737
中图分类号
R9 [药学];
学科分类号
1007 ;
摘要
In this study, a dental membrane scaffold was fabricated using a 3D printing technique, and the antimicrobial effect of pomegranate seed and peel extract were investigated. For the production of the dental membrane scaffold, a combination of polyvinyl alcohol, starch, and pomegranate seed and peel extracts was used. The aim of the scaffold was to cover the damaged area and aid in the healing process. This can be achieved due to the high antimicrobial and antioxidant content of pomegranate seed and peel extracts (PPE: PSE). Moreover, the addition of starch and PPE: PSE improved the biocompatibility of the scaffold, and their biocompatibility was tested using human gingival fibroblast (HGF) cells. The addition of PPE: PSE into the scaffolds resulted in a significant antimicrobial effect on S. aureus and E. faecalis bacteria. Moreover, different concentrations of starch (1%, 2%, 3% w/v) and pomegranate peel and seed extract (3%, 5%, 7%, 9%, and 11% PE v/v) were analyzed to obtain the ideal dental membrane structure. The optimum starch concentration was chosen as 2% w/v due to it giving the scaffold the highest mechanical tensile strength (23.8607 +/- 4.0796 MPa). The pore sizes of each scaffold were studied by SEM analysis, and pore sizes were arranged between 155.86 and 280.96 mu m without any plugging problems. Pomegranate seed and peel extracts were obtained by applying the standard extraction method. High-performance liquid chromatography was performed using the diode-array detection (HPLC-DAD) technique to analyze the phenolic content of the pomegranate seed and peel extracts. Two phenolic components of the pomegranate seed and peel extracts were investigated in the following amounts: fumaric acid (17.56 mu g analyte/mg extract) and quinic acid (18.79 mu g analyte/mg extract) in pomegranate seed extract and fumaric acid (26.95 mu g analyte/mg extract) and quinic acid (33.79 mu g analyte/mg extract) in pomegranate peel extract.
引用
收藏
页数:20
相关论文
共 50 条
  • [41] Fabrication of 3D-printed scaffolds loaded with gallium acetylacetonate for potential application in osteoclastic bone resorption
    Hessel, Evin
    Ghanta, Pratyusha
    Winschel, Timothy
    Melnyk, Larissa
    Oyewumi, Moses O.
    PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY, 2024, 29 (04) : 339 - 352
  • [42] 3D-printed scaffolds support cartilage and bone growth
    Sealy, Cordelia
    MATERIALS TODAY, 2018, 21 (09) : 934 - 935
  • [43] 3D-printed tubular scaffolds for vascular tissue engineering
    Rabionet, Marc
    Jesus Guerra, Antonio
    Puig, Teresa
    Ciurana, Joaquim
    19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING, 2018, 68 : 352 - 357
  • [44] Negligible-cost microfluidic device fabrication using 3D-printed interconnecting channel scaffolds
    Felton, Harry
    Hughes, Robert
    Diaz-Gaxiola, Andrea
    PLOS ONE, 2021, 16 (02):
  • [45] 3D-printed bioceramic scaffolds with antibacterial and osteogenic activity
    Zhang, Yongliang
    Zhai, Dong
    Xu, Mengchi
    Yao, Qingqiang
    Zhu, Huiying
    Chang, Jiang
    Wu, Chengtie
    BIOFABRICATION, 2017, 9 (02)
  • [46] Investigating the fatigue behavior of 3D-printed bone scaffolds
    Yong Wang
    Danli Zhang
    Guangyong Pan
    Journal of Materials Science, 2023, 58 : 12929 - 12953
  • [47] Fabrication and investigation of 3D-printed gun propellants
    Yang, Weitao
    Hu, Rui
    Zheng, Lin
    Yan, Guanghu
    Yan, Wenrong
    MATERIALS & DESIGN, 2020, 192
  • [48] Fabrication and Characterization of a Magnetic 3D-printed Microactuator
    Rothermel, Florian
    Thiele, Simon
    Jung, Chris
    Krapf, Anna
    Ilse, Sven Erik
    Merle, Benoit
    Giessen, Harald
    Herkommer, Alois M.
    ADVANCED MATERIALS TECHNOLOGIES, 2024, 9 (12)
  • [49] Fabrication of a novel 3D-printed perfusion bioreactor for complex cell culture models
    Jun, Brian H.
    Torrez, Jacob E.
    Ross, David J.
    Patterson, Brian M.
    Ishak, Mohammad O.
    Rodriguez, Arasely M.
    Harris, Jennifer F.
    Davis-Anderson, Katie L.
    SCIENTIFIC REPORTS, 2025, 15 (01):
  • [50] Performance of Polydioxanone-Based Membrane in Association with 3D-Printed Bioceramic Scaffolds in Bone Regeneration
    Pitol-Palin, Leticia
    Frigerio, Paula Buzo
    Moura, Juliana
    Pilatti, Livia
    Jordao de Oliveira, Leticia Marques
    Matsubara, Elaine Yoshiko
    Tunchel, Samy
    Shibli, Jamil Awad
    Blay, Alberto
    Saska, Sybele
    Okamoto, Roberta
    POLYMERS, 2023, 15 (01)