Early dolomitization and subsequent hydrothermal modification of the middle Permian Qixia Formation carbonate in the northwest Sichuan Basin

High-quality dolomite reservoir are widely developed in Permian Qixia Formation in northwest Sichuan Basin. Understanding the genesis of dolomite is significant to predicting high-quality reservoir distribution. Based on the petrographical and geochemical characteristics, three types of dolomites and one type of dolomite cement were identified in the Qixia Formation in northwest Sichuan Basin: micritic to fine-crystalline dolomites (D1), medium-crystalline dolomite (D2), medium-to coarse-crystalline dolomite (D3) and saddle dolomite cement.Type D1 dolomites are characterized by micritic to fine-sized crystals, lamellar structure, generally dull to no luminescence, and relatively high strontium (Sr) concentrations. These characteristics suggest that type D1 dolomites were initially formed during the penecontemporaneous phase. The wide range of depleted delta 18O values, slightly higher 87Sr/86Sr ratios and slightly positive europium (Eu) anomalies indicate that type-D1 dolomites were subsequently subjected to hydrothermal modification. Type D2 dolomite is characterized by unimodal middle-sized crystals and crystal texture dominated by nonplanar crystals. It usually occurs as thin or thick layers in the study area. The delta 18O and delta 13C values of type D2 dolomite generally fall within the estimated Middle Permian marine dolomite and show a significantly positive offset compared to those of coeval seawater. The 87Sr/86Sr ratios of type D2 dolomite are slightly higher than the coeval seawater. These features combined with the fiat rare earth element (REE) profile and relatively high Sr concentrations (both are similar to the host limestone) indicate that type D2 dolomites first precipitated in the slightly evaporated Middle Permian seawater during the near-surface to shallow burial phase. Type D3 dolomites are mainly characterized by interlocking mosaic crystals with crystal sizes varying from 300 mu m to 900 mu m. It mainly occurs as patches in type D2 do-lomites or as a thick layer sandwiched by type D2 dolomites. These features combined with its high 87Sr/86Sr ratios, delta 18O depletion and positive Eu anomalies (which are very similar to those of the saddle dolomites) demonstrate that it is formed by hydrothermal recrystallization upon type D2 dolomites. Saddle dolomite generally occurs as the filling cement of pores, vugs, and fractures and is usually combined with matrix dolomite to form zebra dolomite and hydrothermal dolomite breccia. It has a curve crystal face, demonstrates wavy extinction under cross-polarization and red luminescence under a cathodoluminescence microscope. These features, together with the highest Th, most negative delta 18O value and highest 87Sr/86Sr ratio compared to those of all types of dolomites in the study area as well as the positive Eu anomalies suggest that it should have been formed by hydrothermal fiuid precipitation.Type D1 and type D3 dolomites are volumetrically minor and the pores are poorly developed. Saddle dolomite cemented and filled the pores and vugs of matrix dolomite, resulting in reservoir damage. Type D2 dolomites constitute the main body of high-quality reservoir in Qixia Formation. It precipitated in the slightly evaporated penesaline Middle Permian seawater during the near-surface to shallow burial phase. Potential high-quality reservoirs may occur in the shoal around the limited inter-shoal sea.