Corrosion mechanism and fatigue behavior of aluminum alloy with high silicon content

被引:3
|
作者
Shui, Youfu [1 ]
Liu, Jinxiang [1 ]
Huang, Weiqing [1 ]
Zhao, Nuo [2 ]
Ren, Peirong [1 ]
Zhao, Chengzhang [1 ]
机构
[1] Beijing Inst Technol, Sch Mech Engn, Beijing 100081, Peoples R China
[2] China Shipbuilding Informat Ctr, Beijing 100101, Peoples R China
关键词
Al-8Si alloy; Pitting corrosion; Intergranular corrosion; Dislocation energy; Corrosion fatigue; INTERGRANULAR CORROSION; SI ALLOYS; AL; MICROSTRUCTURE; PRECIPITATION; LONG; ROOM;
D O I
10.1016/j.matchemphys.2022.127211
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The corrosion and corrosion-assisted fatigue life degradation behaviors of Al-8Si alloy is investigated. The test results show that galvanic cells are formed in the inter-dendrites due to high Si concentration, leading to pitting corrosion. The Al2Cu phase and the Si-rich phase precipitate at the grain boundaries in the inter-dendrites, among which the Al2Cu phase is the most critical factor leading to intergranular corrosion. Subsequently, intergranular corrosion gradually develops into intragranular corrosion attributed to the higher dislocation energy in fine-grained Al grains. Additionally, it is found by comparing the corrosion potential and corrosion rate that high Si concentration would cause the decrease in corrosion resistance. Finally, the fatigue test results show that the corrosion could reduce fatigue life of Al-8Si alloy by 79.77% on average. Therefore, the corrosion -induced fatigue life degradation is very worth to be considered in structures.
引用
收藏
页数:10
相关论文
共 50 条
  • [1] Effect of corrosion damage on fatigue crack initiation mechanism and growth behavior of high strength aluminum alloy
    Tan, Xiaoming
    Zhang, Danfeng
    Bian, Guixue
    Chen, Yueliang
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2014, 50 (22): : 76 - 83
  • [2] Tensile, fatigue, and corrosion fatigue behavior of high performance die cast aluminum alloy
    Hua, Zuqi
    Wu, Shusen
    JOURNAL OF MATERIALS RESEARCH, 2015, 30 (06) : 833 - 840
  • [3] Tensile, fatigue, and corrosion fatigue behavior of high performance die cast aluminum alloy
    Zuqi Hu
    Shusen Wu
    Journal of Materials Research, 2015, 30 : 833 - 840
  • [4] Corrosion mechanism and fatigue behavior of 2A70-T6 aluminum alloy under alternating corrosion and fatigue
    Fu, Lei
    Li, Hui
    Lin, Li
    Wang, Qingyuan
    Fan, Qi
    Huang, Xinjie
    Li, XiuLan
    Lai, Sheng
    Chen, Lifei
    ANTI-CORROSION METHODS AND MATERIALS, 2021, 68 (05) : 422 - 437
  • [5] CORROSION FATIGUE BEHAVIOR OF A DUPLEX ALUMINUM BRONZE ALLOY
    COLLINS, P
    DUQUETTE, DJ
    CORROSION, 1978, 34 (04) : 119 - 124
  • [6] CORROSION FATIGUE BEHAVIOR OF 2021 ALUMINUM-ALLOY
    SURESH, S
    PALMER, IG
    JOURNAL OF METALS, 1981, 33 (09): : A23 - A23
  • [7] Study on corrosion fatigue behavior and mechanism of 6005A aluminum alloy and welded joint
    Sun, Xiaoguang
    Xu, Xuexu
    Wang, Zihan
    Liu, Zhiyong
    ANTI-CORROSION METHODS AND MATERIALS, 2021, 68 (04) : 302 - 309
  • [8] High cycle fatigue behavior of aluminum alloy
    He, Guoqiu
    Ding, Xiangqun
    Chen, Chengshu
    Zhang, Weihua
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2007, 21 (SUPPL.): : 62 - 65
  • [9] Fatigue behavior and damage mechanism of a cast aluminum alloy in very high cycle regime
    Xue, Hongqian
    Bayraktar, E.
    Bathias, C.
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 706 - +
  • [10] Corrosion mechanism of aluminum alloy materials under high corrosion conditions
    Li, Bo
    Fan, Lei
    Sun, Bo
    Bai, Jie
    Mao, Xianyin
    Song, Shoubo
    Yang, Daning
    Zhang, Zhiqing
    Chen, Keyu
    Di, Rui
    He Jishu/Nuclear Techniques, 2023, 46 (05): : 31 - 39