3D printing of inorganic scintillator-based particle detectors

被引:2
|
作者
Sibilieva, T. [1 ]
Alekseev, V. [1 ]
Barsuk, S. [2 ]
Berns, S. [3 ,4 ]
Boillat, E. [3 ,4 ,5 ]
Boiaryntseya, I [1 ,2 ]
Boyarintsev, A. [1 ]
Carbone, A. [6 ,9 ]
De Roeck, A. [7 ]
Dolan, S. [7 ]
Driuk, T. [1 ]
Gendotti, A. [8 ]
Gerasymov, I. [1 ]
Grynyov, B. [1 ]
Hugon, S.
Kose, U.
Opolonin, O. [1 ]
Rubbia, A. [8 ]
Sgalaberna, D. [8 ]
Sibilyev, M. [1 ]
Tretyak, S. [1 ]
Weber, T. [8 ]
Wuthrich, J. [8 ]
Zhao, X. Y. [8 ]
机构
[1] ISMA NAS Ukraine, Inst Scintillat Mat Natl Acad Sci Ukraine, Nauki Ave 60, UA-61072 Kharkiv, Ukraine
[2] Univ Paris, Univ Paris Saclay, Irene Joliot Curie, Lab Phys Infinis 2,IN2P3 CNRS, F-91405 Orsay, France
[3] Haute Ecole Specialisee Suisse Occidentale HES SO, Route Moutier 14, CH-2800 Delemont, Switzerland
[4] Haute Ecole Ingn Canton Vaud HEIG VD, Route Cheseaux 1, CH-1401 Yverdon, Switzerland
[5] COMATEC AddiPole, Technopole St Croix,Rue Progres 31, CH-1450 St Croix, Switzerland
[6] Sez Bologna, Ist Nazl Fis Nucl INFN, Viale C Berti Pichat 6-2, I-40127 Bologna, Italy
[7] European Org Nucl Res CERN, Expt Phys Dept, Esplanade Particules 1, CH-1211 Geneva 23, Switzerland
[8] Swiss Fed Inst Technol, Inst Particle Phys & Astrophys, Otto Stern Weg 5, CH-8093 Zurich, Switzerland
[9] Univ Bologna, Via Zamboni 33, I-40126 Bologna, Italy
关键词
Scintillators; scintillation and light emission processes (solid; gas and liquid scintillators); Solid state detectors; X-ray detectors;
D O I
10.1088/1748-0221/18/03/P03007
中图分类号
TH7 [仪器、仪表];
学科分类号
0804 ; 080401 ; 081102 ;
摘要
Inorganic scintillators are widely used for scientific, industrial and medical applications. The development of 3D printing with inorganic scintillators would allow the fast creation of detector prototypes for the registration of ionizing radiation, such as alpha, beta and gamma particles in thin layers of active material, and X-ray radiation. This article reports on the technical work and scientific achievements that aimed at developing a new inorganic scintillation filament to be used for the 3D printing of composite scintillator materials: study and definition of the scintillator composition; development of the methods for the inorganic scintillator filament production and further implementation in the available 3D printing technologies; study of the impact of the different 3D printing modes on the material scintillation characteristics. Also, 3D-printed scintillators can be used to produce combined detectors for high-energy physics.
引用
收藏
页数:18
相关论文
共 50 条
  • [21] Scintillator-based transition radiation detectors for very high-energy particles
    Cherry, ML
    Case, GL
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2004, 522 (1-2): : 73 - 76
  • [22] Development and verification of a novel scintillator-based, imaging neutral particle analyzer in DIII-D tokamak
    Du, X. D.
    Van Zeeland, M. A.
    Heidbrink, W. W.
    Su, D.
    NUCLEAR FUSION, 2018, 58 (08)
  • [23] 3D printing for polymer/particle-based processing: A review
    Xu, Weiheng
    Jambhulkar, Sayli
    Zhu, Yuxiang
    Ravichandran, Dharneedar
    Kakarla, Mounika
    Vernon, Brent
    Lott, David G.
    Cornella, Jeffrey L.
    Shefi, Orit
    Miquelard-Garnier, Guillaume
    Yang, Yang
    Song, Kenan
    COMPOSITES PART B-ENGINEERING, 2021, 223
  • [24] Inorganic nanomaterials pin hope on 3D printing
    Sealy, Cordelia
    NANO TODAY, 2023, 53
  • [25] The Use of 3D Printing in the Development of Gaseous Radiation Detectors
    Fargher, Sam
    Steer, Chris
    Thompson, Lee
    ADVANCEMENTS IN NUCLEAR INSTRUMENTATION MEASUREMENT METHODS AND THEIR APPLICATIONS (ANIMMA 2017), 2018, 170
  • [26] Velocity-space sensitivity and tomography of scintillator-based fast-ion loss detectors
    Galdon-Quiroga, J.
    Garcia-Munoz, M.
    Salewski, M.
    Jacobsen, A. S.
    Sanchis-Sanchez, L.
    Rodriguez-Ramos, M.
    Ayllon-Guerola, J.
    Garcia-Lopez, J.
    Gonzalez-Martin, J.
    Jimenez-Ramos, M. C.
    Rivero-Rodriguez, J. F.
    Viezzer, E.
    PLASMA PHYSICS AND CONTROLLED FUSION, 2018, 60 (10)
  • [27] Silicon Photo-Multiplier Readouts for Scintillator-Based Gamma-Ray Detectors in Space
    Bloser, Peter F.
    Legere, Jason S.
    Jablonski, Luke F.
    Bancroft, Christopher M.
    McConnell, Mark L.
    Ryan, James M.
    2010 IEEE NUCLEAR SCIENCE SYMPOSIUM CONFERENCE RECORD (NSS/MIC), 2010, : 357 - 360
  • [28] GEOMETRY COMPENSATION FOR IMPROVING SPEED AND EFFICIENCY OF SCINTILLATOR-BASED NEUTRON TIME-OF-FLIGHT DETECTORS
    LERCHE, RA
    MURPHY, TJ
    REVIEW OF SCIENTIFIC INSTRUMENTS, 1992, 63 (10): : 4880 - 4882
  • [29] Ultrafast inorganic scintillator-based front imager for Gigahertz Hard X-ray imaging
    Hu, Chen
    Zhang, Liyuan
    Zhu, Ren-Yuan
    Demarteau, Marcel
    Wagner, Robert
    Xia, Lei
    Xie, Junqi
    Li, Xuan
    Wang, Zhehui
    Shih, Yanhua
    Smith, Thomas
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2019, 940 : 223 - 229
  • [30] Rapid Prototyping of Microfluidic Conductivity Detectors via Extrusion-Based 3D Printing
    Prabhu, Siddharth
    Strong, Brandon
    Jangid, Aditya
    Liu, Bo
    Martinez, Nathaniel
    FASEB JOURNAL, 2018, 32 (01):