Hardening after annealing in nanostructured 316L stainless steel

被引：0

作者：

Zhongchen Zhou ^{[1
]}

Shuaizhuo Wang ^{[1
]}

Jiansheng Li ^{[1
]}

Yusheng Li ^{[1
]}

Xiaolei Wu ^{[2
]}

Yuntian Zhu ^{[1
,3
]}

机构：

[1] Nano and Heterogeneous Materials Center, School of Materials Science and Engineering, Nanjing University of Science and Technology

[2] State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences

[3] Department of Materials Science and Engineering, North Carolina State University

来源：

Nano Materials Science | 2020年 / 2卷 / 01期

基金：

中央高校基本科研业务费专项资金资助; 国家重点研发计划;

关键词：

Metals and alloys; Nanostructure; Heterostructure; 316L stainless steel; Annealing hardening; Martensitic transformation;

D O I：

暂无

中图分类号：

TG142.71 [不锈钢、耐酸钢]; TG156.2 [退火];

学科分类号：

摘要：

In this work, coarse-grained 316 L stainless steels were cold rolled with a thickness reduction of ～83%(CR 83%).After annealing, the behaviors of the nanostructured stainless steel samples were systematically investigated in the temperatures range of 200C–650C. It was found that with increasing annealing temperature the volume fraction of the α0-martensite first increased to reach a maximum value at 400C, then the volume fraction decreased with further increases of the annealing temperature. The yield strength was increased from 1400 MPa to 1720 MPa after annealing; this strong hardening effect in cold rolled 316 L stainless steel was mainly attributed to the increase of the volume fraction of α0-martensite.

引用

页码：80 / 82

页数：3

共 50 条

[1] Hardening after annealing in nanostructured 316L stainless steel
Zhou, Zhongchen
Wang, Shuaizhuo
Li, Jiansheng
Li, Yusheng
Wu, Xiaolei
Zhu, Yuntian
NANO MATERIALS SCIENCE, 2020, 2 (01) : 80 - 82
[2] Mechanical Behavior of 316L Stainless Steel after Strain Hardening
Li, Kaishang
Peng, Jian
Peng, Jian
2017 INTERNATIONAL CONFERENCE ON MECHANICAL, MATERIAL AND AEROSPACE ENGINEERING (2MAE 2017), 2017, 114
[3] Hardening of 316L stainless steel by laser surface alloying
Laroudie, F.
Tassin, C.
Pons, M.
1995, Chapman & Hall Ltd, London, United Kingdom (30)
[4] Strain hardening behaviour of 316L austenitic stainless steel
Singh, KK
MATERIALS SCIENCE AND TECHNOLOGY, 2004, 20 (09) : 1134 - 1142
[5] Corrosion characteristics of nanostructured layer on 316L stainless steel fabricated by cavitation-annealing
Kwok, C. T.
Cheng, F. T.
Man, H. C.
Ding, W. H.
MATERIALS LETTERS, 2006, 60 (19) : 2419 - 2422
[6] Laser annealing and softening process of 316l stainless steel
Jiang, Ke-Jingu
Wang, Liang
Zhang, Qun-Li
Hu, Yong
Yao, Jian-Hua
Liu, Rong
Surface Technology, 2019, 48 (02) : 10 - 16
[7] Annealing Effect on Wear Resistance of Nanostructured 316L Stainless Steel Subjected to Dynamic Plastic Deformation
Bo Wang
JournalofMaterialsScience&Technology, 2012, 28 (10) : 871 - 877
[8] Annealing Effect on Wear Resistance of Nanostructured 316L Stainless Steel Subjected to Dynamic Plastic Deformation
Wang, Bo
Yao, Bin
Han, Zhong
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2012, 28 (10) : 871 - 877
[9] Alumina nanostructured coating for corrosion protection of 316L stainless steel
Doodman, P.
Faghihi-Sani, M. A.
Barati, N.
Afshar, A.
INTERNATIONAL JOURNAL OF NANO DIMENSION, 2014, 5 (01) : 27 - 33
[10] Thermal stability of a nanostructured layer on the surface of 316L stainless steel
Chui, Pengfei
Sun, Kangning
JOURNAL OF MATERIALS RESEARCH, 2014, 29 (04) : 556 - 560

← 1 2 3 4 5 →