Multi-use laser impulse pendulum and laser propulsion parameters measurement

被引:3
|
作者
李静
童慧峰
蔡建
唐志平
李胜利
机构
[1] Hefei 230027
[2] Key Lab for Mechanical Behavior and Design of Materials
[3] Key Lab for Mechanical Behavior and Design of Materials Chinese of Academy Sciences
[4] University of Science and Technology of China
关键词
mode; Multi-use laser impulse pendulum and laser propulsion parameters measurement; high;
D O I
暂无
中图分类号
TN247 [光检测技术];
学科分类号
摘要
In order to investigate the mechanisms of both the air-breathing and the ablation modes of laser propulsion under laboratory conditions, a multi-use laser impulse pendulum (MULIP) is developed. The measurable impulse range is from 1.0×10-4 to 3.8×10-3 N·s. The experimental calibration data agree well with the theoretical calculated data. With MULIP, the ablation mode has been performed, in which a high power pulsed Nd:glass laser (λ= 1.06μm, τ=20 ns) and a gray PVC film sample are used. The experimental results show that the maximum momentum coupling coefficient Cm is 7.73×10-5 N/W, and the maximum specific impulse Isp is 208.6 s.
引用
收藏
页码:650 / 653
页数:4
相关论文
共 50 条
  • [31] Hypersonic Experimental Analysis of Impulse Generation in Airbreathing Laser Thermal Propulsion
    Salvador, Israel I.
    Myrabo, Leik N.
    Minucci, Marco A. S.
    de Oliveira, Antonio C.
    Toro, Paulo G. P.
    Channes, Jose B., Jr.
    Rego, Israel S.
    JOURNAL OF PROPULSION AND POWER, 2013, 29 (03) : 718 - 731
  • [32] Thrust Measurement for Laser-Detonation Propulsion with a Solid-State Laser
    Wang, Bin
    Michigami, Keisuke
    Komurasaki, Kimiya
    Arakawa, Yoshihiro
    JOURNAL OF PROPULSION AND POWER, 2013, 29 (01) : 276 - 278
  • [33] Specific impulse and other characteristics of elementary propellants for ablative laser propulsion
    Pakhomov, AV
    Gregory, DA
    Thompson, MS
    AIAA JOURNAL, 2002, 40 (05) : 947 - 952
  • [34] Ablative laser propulsion: Determination of specific impulse from plasma imaging
    Lin, J
    Thompson, S
    Pakhomov, AV
    HIGH-POWER LASER ABLATION V, PTS 1 AND 2, 2004, 5448 : 465 - 476
  • [35] Laser propulsion with a high specific impulse using a thin film propellant
    Zhang Yi
    Lu Xin
    Zhou Mu-Lin
    Lin Xiao-Xuan
    Zheng Zhi-Yuan
    Li Yu-Tong
    Zhang Jie
    CHINESE PHYSICS B, 2011, 20 (08)
  • [36] Laser propulsion with a high specific impulse using a thin film propellant
    张翼
    鲁欣
    周木林
    林晓宣
    郑志远
    李玉同
    张杰
    Chinese Physics B, 2011, (08) : 470 - 473
  • [37] MEASUREMENT OF BEAM PARAMETERS OF A LASER
    VALLESE, LM
    APPLIED OPTICS, 1971, 10 (04): : 959 - &
  • [38] Measurement of ablative laser propulsion parameters for aluminum, Co-Ni ferrite and polyurethane polymer
    Jamil, Yasir
    Saeed, Humaima
    Ahmad, M. Raza
    Khan, Shakeel Ahmad
    Farooq, Hashim
    Shahid, Muhammad
    Zia, K. M.
    Amin, Nasir
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2013, 110 (01): : 207 - 210
  • [39] Numerical Analysis of Laser Pulse Frequency and Number of Laser Pulses in Multi-pulsed Laser Propulsion
    Song, J. L.
    Hong, Y. J.
    Wen, M.
    Li, Q.
    LASERS IN ENGINEERING, 2012, 23 (5-6) : 383 - 393
  • [40] Ablative laser propulsion: Specific impulse and thrust derived from force measurements
    Pakhomov, AV
    Thompson, MS
    Swift, W
    Gregory, DA
    AIAA JOURNAL, 2002, 40 (11) : 2305 - 2311