Porous titanium implants fabricated by metal injection molding

被引：0
|
作者：
陈良建 [1 ,2 ]
李挺 [1 ]
李益民 [1 ]
何浩 [1 ]
胡幼华 [1 ]
机构：
[1] State Key Laboratory of Powder Metallurgy,Central South University
[2] Department of Stomatology,Third Xiangya Hospital,Central South University
来源：
Transactions of Nonferrous Metals Society of China | 2009年 / 19卷 / 05期
基金：
中国国家自然科学基金;
关键词：
porous titanium; metal injection molding; porosity; compressive strength; elastic modulus;
D O I：
暂无
中图分类号：
TF124.39 [];
学科分类号：
080502 ;
摘要：
Sodium chloride(NaCl)was added as a space holder in synthesis of porous titanium by using metal injection molding(MIM)method.The microstructure and mechanical properties of porous titanium were analyzed by mercury porosimeter, scanning electron microscope(SEM)and compression tester.The results show that the content of NaCl influences the porosity of porous titanium significantly.Porous titanium powders with porosity in the range of 42.4%-71.6%and pore size up to 300μm were fabricated.The mechanical test shows that with increasing NaCl content,the compressive strength decreases from 316.6 to 17.5 MPa and the elastic modulus decreases from 3.03 to 0.28 GPa.
引用
收藏
页码：1174 / 1179
页数：6
相关论文
共 50 条
  • [21] METAL AND CERAMIC PARTS FABRICATED BY MICROMINIATURE POWDER INJECTION MOLDING
    Piotter, Volker
    Hanemann, Thomas
    Heldele, Richard
    Mueller, Marcus
    Mueller, Tobias
    Plewa, Klaus
    Ruh, Andreas
    [J]. INTERNATIONAL JOURNAL OF POWDER METALLURGY, 2010, 46 (02): : 21 - 28
  • [22] Oxidation Behavior of Superalloy IN 713 Fabricated by Metal Injection Molding
    Sheng, Naicheng
    Horke, Katharina
    Meyer, Andreas
    Rettig, Ralf
    Singer, Robert F.
    [J]. OXIDATION OF METALS, 2019, 91 (1-2): : 113 - 129
  • [23] Oxidation Behavior of Superalloy IN 713 Fabricated by Metal Injection Molding
    Naicheng Sheng
    Katharina Horke
    Andreas Meyer
    Ralf Rettig
    Robert F. Singer
    [J]. Oxidation of Metals, 2019, 91 : 113 - 129
  • [24] An Overview of Highly Porous Titanium Processed via Metal Injection Molding in Combination with the Space Holder Method
    Neto, Francisco Cavilha
    Giaretton, Mauricio Vitor
    Neves, Guilherme Oliveira
    Aguilar, Claudio
    Tramontin Souza, Marcelo
    Binder, Cristiano
    Klein, Aloisio Nelmo
    [J]. METALS, 2022, 12 (05)
  • [25] The impact of injection velocity on the defects in thick components fabricated by inserted metal injection molding
    Safarian, Asghar
    Karatas, Cetin
    [J]. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2015, 106 (06) : 647 - 650
  • [26] Isotropic forming of porous structures via metal injection molding
    Heaney, DF
    Gurosik, JD
    Binet, C
    [J]. JOURNAL OF MATERIALS SCIENCE, 2005, 40 (04) : 973 - 981
  • [27] Isotropic forming of porous structures via metal injection molding
    D. F. Heaney
    J. D. Gurosik
    C. Binet
    [J]. Journal of Materials Science, 2005, 40 : 973 - 981
  • [28] Near-spherical micron-porous NiTi alloys with high performances fabricated via metal injection molding
    Zhu, Benyin
    Li, Dongyang
    Du, Changhai
    Wan, Zicheng
    Zhou, Yang
    Shu, Chang
    Luo, Fenghua
    Li, Yimin
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 892
  • [29] Biocompatibility of Low Modulus Porous Titanium Implants Fabricated by Spark Plasma Sintering
    Song, Ho-Yeon
    Kim, Young-Hee
    Chang, Se-Hun
    Oh, Ik-Hyun
    [J]. KOREAN JOURNAL OF MATERIALS RESEARCH, 2007, 17 (02): : 107 - 114
  • [30] Complex titanium bone screw fabricated by metal injection moulding
    Aust, E
    Limberg, W
    Gerling, R
    Oger, B
    Ebel, T
    [J]. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2005, 36 (09) : 423 - 428
12345