Re-recognition of the Effects of Phosphorus and Boron on the γ’’ and γ’ Phases in IN718 Alloy

被引:0
|
作者
An-Wen Zhang [1 ,2 ]
Yang Li [1 ]
Sha Zhang [1 ]
Fang Liu [1 ]
Wei-Hong Zhang [1 ]
Lian-Xu Yu [1 ]
Wen-Ru Sun [1 ]
机构
[1] Institute of Metal Research, Chinese Academy of Sciences
[2] College of Material Science and Engineering, University of Science and Technology of China
关键词
IN718; superalloy; Phosphorus and boron; γ’’ and γ’phases; Hardness;
D O I
暂无
中图分类号
TG132.3 [特种热性质合金];
学科分类号
080502 ;
摘要
The effects of P and B on the matrix strength and precipitations of γ’ and γ’’ phases in the grain interior were re-recognized in this study. The combination addition of P and B markedly accelerated the precipitations of γ’ and γ’’ phases and strengthened the matrix of IN718 alloy when air-cooled from high temperature, while made no difference when waterquenched from high temperature. The effect of single addition of P on the precipitations of γ’’ and γ’ phases was the same with that of the combination addition of P and B, while the single addition of B had no effect on the precipitations of the two phases. Therefore, it was P rather than B which accelerated the precipitations of γ’ and γ’’ phases. P could take part in the precipitations of γ’ and γ’’ phases, which was revealed by electrochemical extraction and quantitative analysis of chemical composition. It also revealed that P atoms were dissolved in the c matrix to a relatively high degree at the temperature that γ’ and γ’’ phases began to precipitate, and consequently the precipitations of γ’ and γ’’ phases were accelerated. The first-principle calculation indicated that P decreased the formation enthalpies of γ’ and γ’’ phases when it occupied the Ni lattice sites in the two phases, which explained the effect of P on the γ’ and γ’’ phases.
引用
收藏
页码:372 / 380
页数:9
相关论文
共 37 条
  • [31] Effects of phosphorus on the δ-Ni3Nb phase precipitation and the stress rupture properties in alloy 718
    Sun, W.R.
    Guo, S.R.
    Lee, J.H.
    Park, N.K.
    Yoo, Y.S.
    Choe, S.J.
    Hu, Z.Q.
    Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, 1998, A247 (1-2): : 173 - 179
  • [32] A comprehensive study on the effects of tool wear on surface roughness, dimensional integrity and residual stress in turning IN718 hard-to-machine alloy
    Niaki, Farbod Akhavan
    Mears, Laine
    JOURNAL OF MANUFACTURING PROCESSES, 2017, 30 : 268 - 280
  • [33] Effects of shear flows on columnar dendritic microstructure during rapid solidification of IN718 alloy: A cellular automaton-lattice Boltzmann modeling study
    Chen, Boyang
    Zhang, Qingyu
    Sun, Dongke
    Wang, Zhijun
    JOURNAL OF CRYSTAL GROWTH, 2022, 585
  • [34] Effects of individual and combined additions of phosphorus, boron and cerium on primary and eutectic silicon in an Al-30Si alloy
    Dai Hongshang
    Liu Xiangfa
    RARE METALS, 2009, 28 (06) : 651 - 655
  • [35] Effects of individual and combined additions of phosphorus, boron and cerium on primary and eutectic silicon in an Al-30Si alloy
    Hongshang Dai
    Xiangfa Liu
    Rare Metals, 2009, 28 : 651 - 655
  • [36] Effects of individual and combined additions of phosphorus,boron and cerium on primary and eutectic silicon in an Al-30Si alloy
    DAI Hongshanga and LIU Xiangfaa
    RareMetals, 2009, 28 (06) : 651 - 655
  • [37] Effects of multi-scale precipitated phases on the toughness of FeCrAl alloy investigated by varying cooling mode and RE doping
    Duan, Xiufeng
    Zhang, Shoulu
    Hou, Lifeng
    Wang, Zhiguo
    Liu, Baosheng
    Xu, Mei
    Gao, Bo
    Wei, Yinghui
    MATERIALS LETTERS, 2024, 365