Structure and Tribological Properties of CrTiAlN Coatings Deposited by Multi-Arc Ion Plating

被引：0

作者：

田灿鑫 ^{[1
,2
]}

杨兵 ^{[3
]}

何俊 ^{[1
]}

王红军 ^{[1
]}

王泽松 ^{[1
]}

王广甫 ^{[2
]}

付德君 ^{[1
]}

机构：

[1] Accelerator Laboratory and Key Laboratory of Artificial Materials and Microstructures of Ministry of Education,Wuhan University

[2] Key Laboratory of Beam Technology and Material Modication of Ministry of Education,Beijing Normal University

[3] School of Power & Mechanical Engineering,Wuhan University

来源：

Plasma Science and Technology | 2011年 / 01期

关键词：

multi-arc ion plating; CrTiAlN; microhardness; surface morphology; friction coefficient; wear rate;

D O I：

暂无

中图分类号：

O313.5 [摩擦理论];

学科分类号：

摘要：

CrTiAIN coatings were prepared by using a home-made industrial scale multi-arcion plating system.The coatings were found to be composites of face-center-cubic CrN and TiN.The surface roughness,microhardness,and tribological properties of the films were significantlyaffected by the nitrogen pressure and dc-pulsed bias voltage applied to the substrate.The CrTiAINcoatings with the smoothest surfaces were obtained at optimum conditions of nitrogen pressure of5.0 Pa and bias voltage of —200 V.The samples were found to exhibit a hardness of 2900 HV0.05with an average friction coefficient of 0.16 and wear rate of 1.5×10m~3/N ?m against cementedcarbide.

引用

页码：55 / 60

页数：6

共 50 条

[31] Microstructure and Mechanical Properties of Thick Cr/CrN Multilayer Coatings by Multi-arc Ion Plating
Lu Bingying
Ma Fei
Ma Dayan
RARE METAL MATERIALS AND ENGINEERING, 2022, 51 (05) : 1558 - 1564
[32] The deposition, microstructure and properties of Al protective coatings for NdFeB magnets by multi-arc ion plating
Cao, Zhenya
Ding, Xuefeng
Bagheri, Robabeh
Wattoo, Abdul Ghafar
Xu, Cheng
Yang, Lijing
Song, Leixin
Wen, Yongqing
Song, Zhenlun
VACUUM, 2017, 142 : 37 - 44
[33] Microstructure and Mechanical Properties of Thick Cr/CrN Multilayer Coatings by Multi-arc Ion Plating
Lu, Bingying
Ma, Fei
Ma, Dayan
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2022, 51 (05): : 1558 - 1564
[34] Influence of deposition parameters on hard Cr-Al-N coatings deposited by multi-arc ion plating
Wang, Lei
Zhang, Shihong
Chen, Zhong
Li, Jinlong
Li, Mingxi
APPLIED SURFACE SCIENCE, 2012, 258 (08) : 3629 - 3636
[35] Internal stress on adhesion of hard coatings synthesized by multi-arc ion plating
Qiu, L. S.
Zhu, X. D.
Xu, K. W.
SURFACE & COATINGS TECHNOLOGY, 2017, 332 : 267 - 274
[36] Influence of Ti intermediate layers thickness on the properties of TiN coatings fabricated by multi-arc ion plating
Zhang, Hao
Shang, Jin
Luo, Chen-Gang
Luo, Fei-Fei
Zhou, Zi-Hao
Yang, Zhi-Bo
Duo, Shu-Wang
Rengong Jingti Xuebao/Journal of Synthetic Crystals, 2015, 44 : 229 - 233
[37] STUDIES OF Cr-O THIN FILNS DEPOSITED BY MULTI-ARC ION PLATING
WANG Xjangdong Beijing Vacuum Electronics Research InstituteBeijing China and YUAN Lei Beijing Laboratory of Vacuum Physics Academia Sinica Beijing China
真空科学与技术, 1992, (Z1) : 107 - 110
[38] A superhard CrAlSiN superlattice coating deposited by multi-arc ion plating: I. Microstructure and mechanical properties
Zhang, Shihong
Wang, Lei
Wang, Qimin
Li, Mingxi
SURFACE & COATINGS TECHNOLOGY, 2013, 214 : 160 - 167
[39] Structure and tribocorrosion behavior of TiAlCN coatings with different Al contents in artificial seawater by multi-arc ion plating
Liu, Ke
Ma, Fuliang
Lou, Ming
Dong, Minpeng
Zhu, Yebiao
Wang, Yongxin
Wu, Xuedong
Liu, Xiang
Li, Jinlong
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2021, 9 (04)
[40] Effect of Substrate Bias Voltage on Structure and Corrosion Resistance of AlCrN Coatings Prepared by Multi-Arc Ion Plating
Zhao, Yihong
He, Yulong
Chen, Qianyu
Gong, Ziyu
Wang, Zili
Wang, Kai
Shi, Minjie
Chen, Rongfa
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2021, 16 (09): : 1 - 11

← 1 2 3 4 5 →