High strain rate deformation of explosion-welded Ti6Al4V/pure titanium

Multilayer materials are widely used in military,automobile and aerospace industries.In this paper,the response of an explosion-welded Ti6Al4V/pure titanium with a flat interface to dynamic loading is investigated.An SHPB apparatus is used.Then,the dynamic behaviour of a bimetal sample is explored with a DIC system coupled to the SHPB.Result indicates that in the bimetal sample pure titanium is deformed and failed before Ti6Al4V.The stress curve of the sample shows two different peaks in a striker velocity higher than the 18.3 m/s.When the incident wave encounters the interface of the Ti6Al4V/pure titanium sample,only a small fraction of the wave is reflected owing to similar impedance.Using the direct interpretation stress-strain curve is unreasonable in this case because of unhomogenised plastic deformation.The micro structure of the sample is investigated after loading.An adiabatic shear band is formed in the pure titanium side before failure,and the interface of the sample remains intact under different loading conditions.The FEM simulation result for the sample is in good agreement with experimental observations.