Double linear strain distribution assumption of RC beam strengthened with external-bonded or near-surface mounted fiber reinforced plastic

被引:0
|
作者
任振华 [1 ]
刘汉龙 [1 ]
周丰峻 [2 ]
机构
[1] Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering(Hohai University)
[2] The Fourth Engineer Scientific Research Institute of the Headquarters of the General Staff
关键词
double linear strain distribution assumption; external-bonded structure; near-surface mounted structure; fiber reinforced plastic; strengthening; concrete beam;
D O I
暂无
中图分类号
TU375.1 [梁];
学科分类号
081304 ; 081402 ;
摘要
Rehabilitation of existing structures with fiber reinforced plastic(FRP)has been growing in popularity because they offer superior performance in terms of resistance to corrosion and high specific stiffness.The strain coordination results of 34 reinforced concrete beams(four groups)strengthened with different methods were presented including external-bonded or near-surface mounted glass or carbon FRP or helical rib bar in order to study the strain coordination of the strengthening materials and steel rebar of RC beam.Because there is relative slipping between concrete and strengthening materials(SM),the strain of SM and steel rebar of RC beam satisfies the double linear strain distribution assumption,that is,the strain of longitudinal fiber parallel to the neutral axis of plated beam within the scope of effective height(h0)of the cross section is in direct proportion to the distance from the fiber to the neutral axis.The strain of SM and steel rebar satisfies the equation εGCH=βεsteel,where the value of β is equal to 1.1-1.3 according to the test results.
引用
收藏
页码:3582 / 3594
页数:13
相关论文
共 36 条
  • [21] A comparative study of flexural behavior of reinforced masonry walls strengthened with near-surface mounted FRP bars or externally bonded FRP sheets
    Aljaberi, Z. K.
    Myers, J. J.
    ElGawady, M. E.
    INSIGHTS AND INNOVATIONS IN STRUCTURAL ENGINEERING, MECHANICS AND COMPUTATION, 2016, : 1459 - 1464
  • [22] Numerical Analysis of an Innovative Double-Strap Joint for the Splicing of Near-Surface Mounted Fiber-Reinforced Polymer Bars for Reinforced Concrete Beam Strengthening
    Rankovic, Slobodan
    Zoric, Andrija
    Vacev, Todor
    Petrovic, Zarko
    APPLIED SCIENCES-BASEL, 2023, 13 (22):
  • [23] Strain coordination of quasi-plane-hypothesis for reinforced concrete beam strengthened by epoxy-bonded glass fiber reinforced plastic plate
    曾宪桃
    丁亚红
    王兴国
    Journal of Harbin Institute of Technology, 2006, (04) : 391 - 394
  • [24] Predicting shear behavior of reinforced-concrete beams shear-strengthened using near-surface mounted fiber-reinforced polymer method
    Ji, Sang -Won
    Yeon, Yeong-Mo
    Hong, Ki-Nam
    COMPOSITE STRUCTURES, 2023, 311
  • [25] Behavior of Prestressed Hollow-Core Slabs Strengthened in Flexure with Near-Surface Mounted Carbon Fiber-Reinforced Polymer Reinforcement
    Foubert, Steven
    Mahmoud, Karam
    El-Salakawy, Ehab
    JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2016, 20 (06)
  • [26] Monotonic and cyclic flexural performance of timber beams strengthened with glass fiber-reinforced polymer rods using near-surface mounted technique
    Mathuros, Amaras
    Thongchom, Chanachai
    Bui, Linh Van Hong
    Jongvivatsakul, Pitcha
    STRUCTURES, 2024, 65
  • [27] Strength models of near-surface mounted (NSM) fibre-reinforced polymer (FRP) shear-strengthened RC beams based on machine learning approaches
    Ke, Y.
    Zhang, S. S.
    Jedrzejko, M. J.
    Lin, G.
    Li, W. G.
    Nie, X. F.
    COMPOSITE STRUCTURES, 2024, 337
  • [28] Strengthening of RC beams in shear with novel near-surface mounted (NSM) U-shaped fiber-reinforced polymer (FRP) composites
    Jedrzejko, M. J.
    Tian, J.
    Zhang, S. S.
    Ke, Y.
    Nie, X. F.
    Yang, Y. M.
    ENGINEERING STRUCTURES, 2023, 292
  • [29] Calculation method for bending capacity of concrete beams strengthened with pre-stressed near surface mounted carbon fiber reinforced plastic bar
    Zeng, Xian-Tao
    Duan, Jing-Min
    Ding, Ya-Hong
    Gongcheng Lixue/Engineering Mechanics, 2006, 23 (SUPPL. 2): : 112 - 116
  • [30] Debonding Detection of Reinforced Concrete (RC) Beam with Near-Surface Mounted (NSM) Pre-stressed Carbon Fiber Reinforced Polymer (CFRP) Plates Using Embedded Piezoceramic Smart Aggregates (SAs)
    Liu, Yang
    Zhang, Ming
    Yin, Xinfeng
    Huang, Zhou
    Wang, Lei
    APPLIED SCIENCES-BASEL, 2020, 10 (01):