Effect of Sub-Tg Annealing on the Corrosion Resistance of the Cu–Zr Amorphous Alloys

被引:2
|
作者
Sang-Soo Shin [1 ]
Hong-Kyu Kim [2 ]
Jae-Chul Lee [3 ]
Ik-Min Park [1 ]
机构
[1] Department of Materials Science and Engineering, Pusan National University
[2] Advanced Analysis Center, Korea Institute of Science and Technology
[3] Department of Materials Science and Engineering, Korea University
关键词
Amorphous alloys; Corrosion; Annealing; Molecular dynamics; Electrochemical performance;
D O I
暂无
中图分类号
TG139.8 []; TG156.2 [退火];
学科分类号
摘要
Despite the economy of material cost and excellent toughness of Cu-based amorphous alloys, especially CuZr, their poor corrosion resistance to a chloride medium limits their widespread applications. In this study, corrosion tests were performed on the CuZramorphous alloy with different degrees of short-range order, which were prepared by annealing below the glass transition temperature(T). It was found that the corrosion resistance of amorphous alloys is improved to a significant level when the alloys were heated below T. Calorimetric studies showed that thermally activated relaxation process of created disorder, which occurs during sub-Tannealing, is responsible for the improvement in the corrosion resistance. Molecular dynamics simulations performed on the Cu–Zr amorphous alloys demonstrated that the relaxation process of the alloys is associated with the formation of energetically stable icosahedra and icosahedron-like structures. Our study highlights the effects of sub-Tannealing on the improvement in the corrosion resistance of the amorphous alloys from the viewpoint the relaxation process of the short-range orders.
引用
收藏
页码:273 / 280
页数:8
相关论文
共 50 条
  • [21] Structural modification through pressurized sub-Tg annealing of metallic glasses
    Foroughi, A.
    Ashuri, H.
    Tavakoli, R.
    Stoica, M.
    Sopu, D.
    Eckert, J.
    JOURNAL OF APPLIED PHYSICS, 2017, 122 (21)
  • [22] ACID CORROSION OF AMORPHOUS AND CRYSTALLINE CU-ZR ALLOYS
    BALA, H
    SZYMURA, S
    APPLIED SURFACE SCIENCE, 1988, 35 (01) : 41 - 51
  • [23] Influence of sub-Tg annealing on the crystallization kinetics Of Cu47Ti33Zr11Ni8Si1 metallic glass
    Venkataraman, S.
    Hermann, H.
    Sordelet, D. J.
    Eckert, J.
    JOURNAL OF APPLIED PHYSICS, 2008, 104 (06)
  • [24] Rejuvenation and Malleability Enhancement of Zr-Based Metallic Glass by Sub-Tg Annealing and Cryogenic Thermal Cycle Treatment
    Zhao, Zhenxiang
    Li, Chunyan
    Liu, Yuchen
    Li, Chunling
    Kou, Shengzhong
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (18) : 8430 - 8440
  • [25] Rejuvenation and Malleability Enhancement of Zr-Based Metallic Glass by Sub-Tg Annealing and Cryogenic Thermal Cycle Treatment
    Zhenxiang Zhao
    Chunyan Li
    Yuchen Liu
    Chunling Li
    Shengzhong Kou
    Journal of Materials Engineering and Performance, 2023, 32 : 8430 - 8440
  • [26] EFFECT OF CHROMIUM ADDITION ON CORROSION RESISTANCE OF AMORPHOUS Co-Zr ALLOYS.
    Naka, Masaaki
    Miyake, Masauki
    Maeda, Michimasa
    Okamoto, Ikuo
    Arata, Yoshiaki
    Transactions of JWRI (Japanese Welding Research Institute), 1982, 11 (02): : 171 - 173
  • [27] SUB-TG ANNEALING STUDIES OF RUBBER-MODIFIED AND UNMODIFIED EPOXY SYSTEMS
    OPHIR, ZH
    EMERSON, JA
    WILKES, GL
    JOURNAL OF APPLIED PHYSICS, 1978, 49 (10) : 5032 - 5038
  • [28] Effect of Ni on Corrosion Behavior of Zr-Cu-Al Amorphous Alloys in NaCl Solution
    Gan Youyi
    Liu Hao
    Li Guang
    Shi Yu
    Ma Lifeng
    Zhao Yanchun
    Liu Ming
    Zhang Jianbin
    RARE METAL MATERIALS AND ENGINEERING, 2022, 51 (02) : 712 - 718
  • [29] Effect of isothermal annealing on the corrosion resistance of an amorphous alloy
    Shin, Sang-Soo
    Lee, Chang-Myeon
    Yang, Jae-Woong
    Lee, Jae-Chul
    JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS, 2008, 46 (02): : 53 - 57
  • [30] The amorphous state of pharmaceuticals obtained or transformed by milling: Sub-Tg features and rejuvenation
    Descamps, M.
    Aumelas, A.
    Desprez, S.
    Willart, J. F.
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2015, 407 : 72 - 80