Macrosegregation and the underlying mechanism in Ti-6.5Al-1.0Cr-0.5Fe-6.0Mo-3.0Sn-4.0Zr alloy

被引：0
|
作者：
Xin Liu [1 ,2 ]
Guang Feng [3 ]
Yu Zhou [1 ,2 ]
Qunbo Fan [1 ,2 ]
机构：
[1] School of Materials Science and Engineering, Beijing Institute of Technology
[2] National Key Laboratory of Science and Technology on Materials Under Shock and Impact, Beijing Institute of Technology
[3] Central Iron and Steel Research Institute
来源：
Progress in Natural Science:Materials International | 2019年 / 29卷 / 02期
基金：
中国国家自然科学基金;
关键词：
OPA-SS; Macrosegregation; Titanium alloy; Thermodynamic calculation; Partition coefficient;
D O I：
暂无
中图分类号：
TG146.23 [];
学科分类号：
080502 ;
摘要：
A novel method for the analysis of composition distribution of titanium alloys over a large area(64 mm × 72 mm) was investigated by exploring the original position statistic distribution based on spark spectrum(OPA-SS) in Ti-6.5 Al-1.0 Cr-0.5 Fe-6.0 Mo-3.0-Sn-4.0 Zr titanium alloy. The results showed that OPA-SS could characterize the distribution of elements in different positions on the titanium alloy. The macrosegregation of Sn was the most pronounced, with a statistic segregation degree higher than 18%; the macrosegregation of Mo followed with a statistic segregation degree of 10%; the macrosegregation of Al and Fe was relatively milder,lower than 8%. The main reason for the macrosegregation state of the as-cast Ti-6.5 Al-1.0 Cr-0.5 Fe-6.0 Mo-3.0 Sn-4.0 Zr alloy can be the solute redistribution during liquid solidification and the diffusion rate of each element in the solid phase.
引用
收藏
页码：224 / 230
页数：7
相关论文
共 50 条
  • [31] Flow Behavior and Constitutive Equation of Ti-6.5Al-2Sn-4Zr-4Mo-1W-0.2Si Titanium Alloy
    Xuemei Yang
    Hongzhen Guo
    Houquan Liang
    Zekun Yao
    Shichong Yuan
    [J]. Journal of Materials Engineering and Performance, 2016, 25 : 1347 - 1359
  • [32] Transformations in the Ti-5Al-2Sn-2Zr-4Mo-4Cr (Ti-17) alloy and mechanical and microstructural characteristics
    Tarin, P.
    Fernandez, A. L.
    Simon, A. G.
    Badia, J. M.
    Piris, N. M.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 438 (SPEC. ISS.): : 364 - 368
  • [33] Microtexture and Nanoindentation of α and β Phases in Ti-6Al-1.5Cr-2.5Mo-0.5Fe-0.3Si Titanium Alloy
    Lei, Xiaofei
    Dong, Limin
    Zhang, Zhiqiang
    Hu, Ming
    Wang, Zhongchang
    Hao, Yulin
    Yang, Rui
    [J]. SCIENCE OF ADVANCED MATERIALS, 2017, 9 (09) : 1476 - 1483
  • [34] An investigation into the warm deformation behavior of Ti-6Al-1.5Cr-2.5Mo-0.5Fe-0.3Si alloy
    Ghasemi, E.
    Zarei-Hanzaki, A.
    Moemeni, S.
    Ghambari, M.
    Rezaee, M.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 654 : 264 - 270
  • [35] DYNAMIC FRACTURE-TOUGHNESS AND FRACTURE MECHANISM IN TI-6AL-2SN-4ZR-2MO ALLOY
    OKA, T
    [J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (13): : 1583 - 1583
  • [36] Hot deformation characteristics and mechanism understanding of Ti-6Al-2Sn-4Zr-6Mo titanium alloy
    Zhang, Jingqi
    Xu, Xinyu
    Xue, Jiayu
    Liu, Sinong
    Deng, Qinghua
    Li, Feng
    Ding, Jie
    Wang, Hui
    Chang, Hui
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 20 : 2591 - 2610
  • [37] Dynamic globularization mechanism during hot working of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy with lamellar microstructure
    Li, Xin
    Deng, Siying
    Wang, Songwei
    Song, Hongwu
    Zhang, Shihong
    Wang, Kelu
    Ouyang, Delai
    [J]. MATERIALS CHARACTERIZATION, 2021, 171
  • [38] Study on Fatigue Behavior and Fracture Mechanism of LMD Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloy Based on Microstructure
    Wu, Yuxue
    Wang, Yongxin
    Lu, Yunmei
    Zhao, Chenxi
    [J]. Materials, 2024, 17 (24)
  • [39] Effect of stretching on the strength (Bauschinger effect) of Ti-6Al-2Cr-2Mo-2Sn-2Zr alloy
    Zhang, XD
    Ginter, TJ
    Cornell, B
    Evans, DJ
    Fraser, HL
    [J]. JOURNAL OF ADVANCED MATERIALS, 2000, 32 (01): : 34 - 38
  • [40] Effect of stretching on the strength (Bauschinger effect) of Ti-6Al-2Cr-2Mo-2Sn-2Zr alloy
    Zhang, Xiao-Dong
    Ginter, Timothy J.
    Cornell, Brian
    Evans, Dan J.
    Fraser, Hamish L.
    [J]. 1600, SAMPE, Covina, CA, United States (32):
12345