Failure modes of PDC cutters under different loads

被引：0
|
作者：
李夕兵
赵伏军
机构：
来源：
Transactions of Nonferrous Metals Society of China | 2002年 / 03期
关键词：
failure mode; PDC cutters; combined loads;
D O I：
暂无
中图分类号：
TD231 [钻眼、凿岩工程];
学科分类号：
摘要：
The capability of several types of flat PDC cutters to withstand combined loads were tested and evaluated by the impact and cutting of single PDC cutter on granite in a linear impact cutting table. The primary failure modes of PDC cutters withstanding different combined loads were investigated and analyzed. The suggestions of enhancing PDC cutters to be suitable for drilling very hard rock have been made.
引用
收藏
页码：504 / 507
页数：4
相关论文
共 50 条
  • [31] Seismic Failure Modes and Deformation Capacity of Reinforced Concrete Columns under Cyclic Loads
    Ma Ying
    Gong Jin-xin
    PERIODICA POLYTECHNICA-CIVIL ENGINEERING, 2018, 62 (01): : 80 - 91
  • [32] Numerical Analysis on Failure Modes of Steel Frame under Fire Combined Blast Loads
    Yan, Shi
    Yang, Lu
    Jiang, Xuelei
    ADVANCES IN CIVIL ENGINEERING AND BUILDING MATERIALS III, 2014, 831 : 476 - 480
  • [33] Correlation between structural failure modes and calculation of system reliability under hazard loads
    Li, G., 2001, Tsinghua University (18):
  • [34] Failure modes of tapered suction caissons under vertical pull-out loads
    Nabipour, Mahmood
    Zeinoddini, Mostafa
    Abdi, Mahmood R.
    PROCEEDINGS OF THE 26TH INTERNATIONAL CONFERENCE ON OFFSHORE MECHANICS AND ARCTIC ENGINEERING, VOL 1, 2007, : 613 - 620
  • [35] Failure Modes and Collapse Control of a Jacket Offshore Platform Structure under Environmental Loads
    Song, Zhengrong
    Du, Bin
    Liu, Zhao
    Pang, Da
    Proceedings of the International Offshore and Polar Engineering Conference, 2023, : 3254 - 3261
  • [36] Correlation between structural failure modes and calculation of system reliability under hazard loads
    Li, G.
    Cheng, G.-D.
    Gong Cheng Li Xue/Engineering Mechanics, 2001, 18 (03): : 1 - 9
  • [37] Effect of Different Post-weld Heat Treatments Used in Brazing in PDC Bit Cutters
    Li, Geng
    2015 4TH INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENTAL PROTECTION (ICEEP 2015), 2015, : 315 - 320
  • [38] With functionalization, nanodiamonds may increase durability of PDC cutters
    Chakraborty, Soma
    Agrawal, Gaurav
    Di Giovanni, Anthony
    Scott, Dan
    JPT, Journal of Petroleum Technology, 2012, 64 (12): : 134 - 137
  • [39] Cutting capacity of PDC cutters in very hard rock
    Li, XB
    Zhao, FJ
    Summers, DA
    Rupert, G
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2002, 12 (02) : 305 - 309
  • [40] Precise calculation and analysis of working angles of PDC cutters
    Li, Shusheng
    Ma, Dekun
    Hou, Jikang
    Xinan Shiyou Xueyuan Xuebao/Journal of Southwestern Petroleum Institute, 1996, 18 (04): : 67 - 72
12345