Co-pyrolysis characteristics of typical components of waste plastics in a falling film pyrolysis reactor

被引：1
|
作者：
Zechen Jin [1 ,2 ]
Lijie Yin [1 ]
Dezhen Chen [1 ]
Yuanjie Jia [1 ]
Jun Yuan [1 ]
Yuyan Hu [1 ]
机构：
[1] Thermal and Environmental Engineering Institute, Tongji University
[2] Shanghai Municipal Engineering Design Institute(Group) Co., Ltd.
来源：
Chinese Journal of Chemical Engineering | 2018年 / 26卷 / 10期
基金：
中国国家自然科学基金;
关键词：
Co-pyrolysis; Falling film reactor; Waste plastics;
D O I：
暂无
中图分类号：
TQ320.1 [基础理论]; X705 [固体废物的处理与利用];
学科分类号：
0805 ; 080502 ; 083002 ;
摘要：
Waste plastics mainly come from MSW and usually exist in the form of mixed plastics. During the co-pyrolysis process of mixed plastics, various plastic components have different physicochemical properties and reaction mechanisms. Considering the high viscosity and low thermal conductivity of molten plastics, a falling film pyrolysis reactor was selected to explore the rapid co-pyrolysis process of typical plastic components(PP, PE and PS).The oil and gas yields and the compositions of pyrolysis products of the three components under different ratios at pyrolysis temperatures were analyzed to explore the co-pyrolysis characteristics of PP, PE, and PS. The study is of great significance to the recycling of waste plastics.
引用
收藏
页码：2176 / 2184
页数：9
相关论文
共 50 条
  • [31] Phenols from pyrolysis and co-pyrolysis of tobacco biomass components
    Kibet, Joshua K.
    Khachatryan, Lavrent
    Dellinger, Barry
    [J]. CHEMOSPHERE, 2015, 138 : 259 - 265
  • [32] Co-pyrolysis of waste polymers with coal
    Straka, P
    Buchtele, J
    Kovárová, J
    [J]. MACROMOLECULAR SYMPOSIA, 1998, 135 : 19 - 23
  • [33] CHARACTERISTICS OF CHAR FROM CO-PYROLYSIS OF BIOMASS AND PLASTIC WASTE
    Burra, K. G.
    Gupta, A. K.
    [J]. PROCEEDINGS OF THE ASME POWER CONFERENCE, 2018, VOL 1, 2018,
  • [34] Co-pyrolysis of seaweeds with waste plastics: modeling and simulation of effects of co-pyrolysis parameters on yields, and optimization studies for maximum yield of enhanced biofuels
    Uzoejinwa, Benjamin Bernard
    He, Xiuhua
    Wang, Shuang
    Abomohra, Abd El-Fatah
    Hu, Yamin
    He, Zhixia
    Wang, Qian
    [J]. ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2020, 42 (08) : 954 - 978
  • [35] Simulation of an innovative reactor for waste plastics pyrolysis
    Yin, L. J.
    Chen, D. Z.
    Wang, H.
    Ma, X. B.
    Zhou, G. M.
    [J]. CHEMICAL ENGINEERING JOURNAL, 2014, 237 : 229 - 235
  • [36] Interactions of three municipal solid waste components during co-pyrolysis
    Zhou, Hui
    Long, YanQiu
    Meng, AiHong
    Li, QingHai
    Zhang, YanGuo
    [J]. JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 2015, 111 : 265 - 271
  • [37] Fueling sustainability: Co-pyrolysis of microalgae biomass and waste plastics for renewable energy and waste mitigation
    Nawaz, Ahmad
    Haddad, Hayat
    Shah, Mudasir Akbar
    Uddin, Shihab
    Hossain, Mohammad Mozahar
    Razzak, Shaikh Abdur
    [J]. BIOMASS & BIOENERGY, 2024, 187
  • [38] Co-pyrolysis of oil shale and plastics: Influence of pyrolysis parameters on the product yields
    Aboulkas, A.
    Makayssi, T.
    Bilali, L.
    El Harfi, K.
    Nadifiyine, M.
    Benchanaa, M.
    [J]. FUEL PROCESSING TECHNOLOGY, 2012, 96 : 209 - 213
  • [39] Effect of typical impurities on the pyrolysis oil of waste plastics
    Sun K.
    Wang W.
    Huang Q.
    [J]. Huagong Jinzhan/Chemical Industry and Engineering Progress, 2021, 40 (06): : 3499 - 3506
  • [40] Co-pyrolysis characteristics and pyrolysis oil analysis of Chlorella vulgaris and marine waste plastics with multi-metal MOFs-derived additive
    Wan, Shouqiang
    Chen, Chunxiang
    Yang, Ronglin
    Zhao, Shiyi
    He, Shiyuan
    Zhao, Xingchen
    [J]. Chemical Engineering Journal, 1600, 498
12345