Computational study of bubble coalescence/break-up behaviors and bubble size distribution in a 3-D pressurized bubbling gas-solid fluidized bed of Geldart A particles

被引:0
|
作者
Teng Wang [1 ]
Zihong Xia [1 ]
Caixia Chen [1 ]
机构
[1] Department of Energy and Chemical Engineering, East China University of Science and Technology
基金
中国国家自然科学基金;
关键词
D O I
暂无
中图分类号
TQ021.1 [流体力学过程及原理];
学科分类号
081701 ; 081704 ;
摘要
A computational study was carried out on bubble dynamic behaviors and bubble size distributions in a pressurized lab-scale gas-solid fluidized bed of Geldart A particles. High-resolution 3-D numerical simulations were performed using the two-fluid model based on the kinetic theory of granular flow. A finegrid, which is in the range of 3–4 particle diameters, was utilized in order to capture bubble structures explicitly without breaking down the continuum assumption for the solid phase. A novel bubble tracking scheme was developed in combination with a 3-D detection and tracking algorithm(MS3 DATA) and applied to detect the bubble statistics, such as bubble size, location in each time frame and relative position between two adjacent time frames, from numerical simulations. The spatial coordinates and corresponding void fraction data were sampled at 100 Hz for data analyzing. The bubble coalescence/break-up frequencies and the daughter bubble size distribution were evaluated by using the new bubble tracking algorithm. The results showed that the bubble size distributed non-uniformly over cross-sections in the bed. The equilibrium bubble diameter due to bubble break-up and coalescence dynamics can be obtained,and the bubble rise velocity follows Davidson’s correlation closely. Good agreements were obtained between the computed results and that predicted by using the bubble break-up model proposed in our previous work. The computational bubble tracking method showed the potential of analyzing bubble motions and the coalescence and break-up characteristics based on time series data sets of void fraction maps obtained numerically and experimentally.
引用
收藏
页码:485 / 496
页数:12
相关论文
共 25 条
  • [21] Bubble behavior in gas-solid bubbling fluidized beds based on EMMS model: Comparison of 2D, Q2D, and 3D simulations
    Wang, Hao
    Lu, Youjun
    Xi, Kenan
    CHEMICAL ENGINEERING RESEARCH & DESIGN, 2019, 149 : 65 - 80
  • [22] Bubble-induced particle mixing in a 2-D gas-solid fluidized bed with different bed aspect ratios: A CFD-DPM study
    Amiri, Zahra
    Movahedirad, Salman
    POWDER TECHNOLOGY, 2017, 320 : 637 - 645
  • [23] A Simplified Bubble Size Relation Compatible with the Energy Minimization Multiscale Drag Model for Studying Hydrodynamics in a 2D Gas-Solid Tapered Fluidized Bed
    Sahoo, Lipak Kumar
    Sarkar, Sabita
    STEEL RESEARCH INTERNATIONAL, 2024,
  • [24] Bubble dynamics properties of B-particles in a quasi-2D gas-solid fluidized bed: Computational particle fluid dynamics numerical simulation and post-processed by digital image analysis technique
    Yuan, Zemin
    Huang, Zhong
    Qin, Guotao
    Zhao, Guanjia
    Ma, Suxia
    Yang, Hairui
    Yue, Guangxi
    PARTICUOLOGY, 2024, 86 : 223 - 238
  • [25] Experimental study on the influence of bed material on the scaling of solids circulation patterns in 3D bubbling gas-solid fluidized beds of glass and polyethylene using positron emission particle tracking
    Laverman, J. A.
    Fan, X.
    Ingram, A.
    Annaland, M. van Sint
    Parker, D. J.
    Seville, J. P. K.
    Kuipers, J. A. M.
    POWDER TECHNOLOGY, 2012, 224 : 297 - 305