Optimization design of deep lean-ore mining and safety evaluation

In order to settle the mining optimization design and safety problem of the above 1 150 m pillar of No.1 ore-body in No.Ⅱ Mining Jinchuan, the lean-ore above 1 250 m, the 1 150 m horizontal pillar and the ore-body below 1 100 m regarded as research objects based on the original design project, and nine calculation schemes on different mining sequence and different fill body strength were put forward based on cement-sand ratio of 1:4, 1: 12 and 1: 24.Calculation parameters were got by the back analysis method of field monitoring data, and the FLACprogram was applied to compute for these schemes,stress and displacement of ground settlement, shaft and stope roof were analyzed, and some conclusions were got.Results show that the intensity of filling body and the mining technique have very important effect on controlling settlement and stability of surrounding rock;Developing of lean ore have some influences to the 16th return air filling shaft, especially for 1 500～1 400 m of the shaft;The best project is the first project.This research supply some technique references and safety appraisals for the mining of lean-ore of No.Ⅱ Mining Jinchuan.