Carbothermic reduction of alumina with carbon in vacuum

被引:0
|
作者
郁青春 [1 ]
袁海滨 [1 ]
朱富龙 [1 ]
张晗 [1 ]
王辰 [1 ]
刘大春 [1 ]
杨斌 [1 ]
机构
[1] National Engineering Laboratory of Vacuum Metallurgy,Key Laboratory of Breeding Base of Complex Nonferrous Metal Resources Clear Utilization in Yunnan Province,State Key Laboratory of Nonferrous Metal Vacuum Metallurgy,Kunming University of Science and Tec
关键词
alumina; carbothermic reduction; vacuum; aluminum;
D O I
暂无
中图分类号
TF821 [铝];
学科分类号
080603 ;
摘要
Carbothermic reduction alumina in vacuum was conducted,and the products were analysed by means of XRD and gas chromatography. Thermodynamic analysis shows that in vacuum the initial carbothermic reduction reaction temperature reduces compared with that under normal pressure,and the preferential order of products is Al4O4C,Al4C3,Al2OC,Al2O and Al. Experiment results show that the carbothermic reduction products of alumina are Al4O4C and Al4C3,and neither Al2OC,Al2O or Al was found. During the carbothermic reduction process,the reaction rate of Al2O3 and carbon decreases gradually with increasing time. Meanwhile,lower system pressure or higher temperature is beneficial to the carbothermic reduction of alumina process. Al4O4C is firstly formed in the carbothermic reaction,and then Al4C3 is formed in lower system pressure or at higher temperature.
引用
收藏
页码:1813 / 1816
页数:4
相关论文
共 50 条
  • [21] Analysis of Magnesia Carbothermic Reduction Process in Vacuum
    Tian, Yang
    Xu, Bao-Qiang
    Yang, Cheng-Bo
    Yang, Bin
    Qu, Tao
    Liu, Hong-Xiang
    Dai, Yong-Nian
    Liu, Da-Chun
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2014, 45 (05): : 1936 - 1941
  • [22] Study on Carbothermic Reduction of Titanium Dioxide in Vacuum
    Xu Bao-qiang
    Yang Bin
    He Jian-ping
    Seng Wei
    Dai Yong-nian
    Liu Da-chun
    VACUUM TECHNOLOGY AND SURFACE ENGINEERING - PROCEEDINGS OF THE 9TH VACUUM METALLURGY AND SURFACE ENGINEERING CONFERENCE, 2009, : 499 - +
  • [23] Behavior of Fe2O3 in Al extraction by alumina carbothermic reduction-chlorination in vacuum
    Zhu F.
    Yu Q.
    Yang B.
    Yuan H.
    Xu B.
    Dai Y.
    Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology, 2011, 31 (04): : 485 - 489
  • [24] Recycling of lead and zinc dusts by vacuum carbothermic reduction
    Sun, Hongyan
    Kong, Xin
    Sen, Wei
    Wang, Baosen
    Yi, Zhongzhou
    Liu, Guiyang
    Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology, 2014, 34 (07): : 758 - 762
  • [25] PRODUCTION OF MAGNESIUM BY VACUUM CARBOTHERMIC REDUCTION OF CALCINED DOLOMITE
    WINAND, R
    VANGYSEL, M
    FONTANA, A
    SEGERS, L
    CARLIER, JC
    TRANSACTIONS OF THE INSTITUTION OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY, 1990, 99 : C105 - C112
  • [26] Behavior of magnesia in Mg extraction by carbothermic reduction in vacuum
    Tian, Yang
    Yang, Bin
    Liu, Hongxiang
    Yang, Chengbo
    Qu, Tao
    Dai, Yongnian
    Peng, Peng
    Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology, 2013, 33 (09): : 920 - 925
  • [27] Behaviour of Silicon in Nickel Laterite by Carbothermic Reduction in Vacuum
    Shi, Lei
    Qu, Tao
    Liu, Dachun
    Tian, Yang
    Yang, Bin
    Dai, Yongnian
    8TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING, 2017, : 517 - 527
  • [28] Magnesium extraction from magnesia by carbothermic reduction in vacuum
    Tian, Yang
    Liu, Hongxiang
    Yang, Bin
    Qu, Tao
    Dai, Yongnian
    Peng, Peng
    Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology, 2012, 32 (04): : 306 - 311
  • [29] VACUUM CARBOTHERMIC REDUCTION OF BAUXITE COMPONENTS: A THERMODYNAMIC STUDY
    Halmann, M.
    Epstein, M.
    Steinfeld, A.
    MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW, 2012, 33 (03): : 190 - 203
  • [30] Comparative study on the metal aluminum produced from alumina by carbothermic reduction and carbothermic-chlorination
    Yu, Qingchun
    Yang, Bin
    Deng, Yong
    Wang, Fei
    Xiong, Heng
    Chen, Minxiu
    4TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING, 2013, : 287 - 292