Mechanism of laser welding on dissimilar metals between stainless steel and W-Cu alloy

被引：4
|
作者：
陈铠
王智勇
肖荣诗
左铁钏
机构：
[1] Beijing 100022
[2] College of Laser Engineering Beijing University of Technology
[3] National Center of Laser Technology
来源：
Chinese Optics Letters | 2006年 / 05期
关键词：
Mechanism of laser welding on dissimilar metals between stainless steel and W-Cu alloy; Cu;
D O I：
暂无
中图分类号：
TG456.7 [激光焊];
学科分类号：
摘要：
CO2 laser is employed to join a piece of powder metallurgical material (PMM) to a stainless steel in butt joint welding mode. The powder Ni35, as a filler powder, is used. The weld metal comes from three parts of stainless steel, powder Ni35, and Cu in W-Cu PMM. It is indicated that some parts of the W-Cu base metal are heated by laser and the metal Cu at the width of 0.06-0.12 mm from the edge is melted into the melting pool in the laser welding process. The formation of firm weld joint is just because that the melting liquid metal could fill the position occupied by metal Cu and surround the metal W granules fully. The analysis results indicate that the mechanism of the laser welding for stainless steel and W-Cu alloy is a special mode of fusion-brazing welding.
引用
收藏
页码：294 / 296
页数：3
相关论文
共 50 条
  • [21] Research on Laser-MIG Fusion-Brazing Welding of Stainless Steel/Aluminum Dissimilar Metals
    Zhu Z.
    Wan Z.
    Xue J.
    1600, Cailiao Daobaoshe/ Materials Review (31): : 52 - 55
  • [22] Dissimilar welding between Cu-6Al-2Ni alloy and stainless steel 316L using continuous ytterbium YAG laser
    Haglon, Nathan
    Bolot, Rodolphe
    Tomashchuk, Iryna
    Mathieu, Alexandre
    Lafaye, Sebastien
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2024, 238 (12) : 2328 - 2342
  • [23] Analysis of Ni interlayer effects on laser beam welding of dissimilar pure Mo alloy to stainless steel
    Gao, Xiao-long
    Li, Lun-kun
    Liu, Jing
    Wang, Xiaoqiang
    Yu, Haokui
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021, 100
  • [24] Laser-Arc Hybrid Welding of Dissimilar Titanium Alloy and Stainless Steel Using Copper Wire
    Ming Gao
    Cong Chen
    Lei Wang
    Zemin Wang
    Xiaoyan Zeng
    Metallurgical and Materials Transactions A, 2015, 46 : 2007 - 2020
  • [25] Laser-Arc Hybrid Welding of Dissimilar Titanium Alloy and Stainless Steel Using Copper Wire
    Gao, Ming
    Chen, Cong
    Wang, Lei
    Wang, Zemin
    Zeng, Xiaoyan
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (05): : 2007 - 2020
  • [26] Formation mechanism of ZnO in dissimilar welding of aluminum alloy to steel
    Dong, Honggang
    Wang, Pengxiao
    Hao, Xiaohu
    Li, Shuai
    Li, Peng
    Gao, Yulai
    Zhao, Bingge
    Yan, Dejun
    MATERIALS LETTERS, 2018, 228 : 407 - 410
  • [27] Dissimilar metals TIG welding-brazing of AZ31 magnesium alloy to 304 stainless steel
    Kotari, Sairam
    Punna, Eshwaraiah
    Gangadhar, S. M.
    Cheepu, Muralimohan
    Sarkar, P.
    Venukumar, S.
    MATERIALS TODAY-PROCEEDINGS, 2021, 39 : 1549 - 1552
  • [28] Spreading behavior and microstructure characteristics of dissimilar metals TIG welding-brazing of aluminum alloy to stainless steel
    Song, J. L.
    Lin, S. B.
    Yang, C. L.
    Ma, G. C.
    Liu, H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 509 (1-2): : 31 - 40
  • [29] Dissimilar friction stir welding of duplex stainless steel to low alloy structural steel
    Logan, B. P.
    Toumpis, A. I.
    Galloway, A. M.
    McPherson, N. A.
    Hambling, S. J.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2016, 21 (01) : 27 - 35
  • [30] The influence of laser welding configuration on the properties of dissimilar stainless steel welds
    Romoli, L.
    Rashed, C. A. A.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 81 (1-4): : 563 - 576
12345