Over-relaxation effect of deformed austenite on ageing behavior of an Nb-bearing microalloyed steel

被引:0
|
作者
Shaoqiang Yuan
机构
关键词
over-relaxation; ageing; hardness; precipitates;
D O I
暂无
中图分类号
TG113 [金相学(金属的组织与性能)];
学科分类号
080502 ;
摘要
The ageing behavior of an Nb-bearing microalloyed steel at 525℃was investigated by thermo-simulation test, hardness measurements and transmission electron microscopy (TEM). Prior to ageing, the steel was deformed in austenite zone followed by a long relaxation. Experimental results indicate that the hardness decreases gradually in the initial stage until ageing for 120 min, and then increases continuously until 1200 min. The coarsened precipitates (>10 nm) formed in deformed austenite remain nearly unchanged in size, even after ageing for long time, while the further precipitates, which nucleate in a phase, contribute to the increasing of hardness. By comparison, the undeformed samples in austenite subjected to the same ageing process display a very similar hardness change trend to that of over-relaxation ones and have higher hardness values at each corresponding period.
引用
收藏
页码:248 / 251
页数:4
相关论文
共 50 条
  • [21] Effect of Nb Precipitates and Reversed Austenite Formed by QLT Process on Microstructure and Mechanical Properties of Nb-Bearing 7Ni Cryogenic Steel
    Wang, Enmao
    Ding, Chao
    Gong, Na
    Gu, Chen
    Liu, Hongfei
    Li, Lin
    Wu, Huibin
    Niu, Gang
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2024, 55 (01): : 247 - 260
  • [22] Effect of Nb Precipitates and Reversed Austenite Formed by QLT Process on Microstructure and Mechanical Properties of Nb-Bearing 7Ni Cryogenic Steel
    Enmao Wang
    Chao Ding
    Na Gong
    Chen Gu
    Hongfei Liu
    Lin Li
    Huibin Wu
    Gang Niu
    [J]. Metallurgical and Materials Transactions A, 2024, 55 : 247 - 260
  • [23] Plastometric and computer modeling of deformation behavior of Nb-bearing HSLA-steel
    Schindler, I
    Kliber, J
    Boruta, J
    [J]. METALURGIJA, 1996, 35 (04): : 211 - 214
  • [24] Role of Ti on the Growth of Coarse Columnar Austenite Grain During Nb-Bearing Peritectic Steel Solidification
    Jiazhi An
    Zhaozhen Cai
    Miaoyong Zhu
    [J]. Metallurgical and Materials Transactions A, 2022, 53 : 1540 - 1551
  • [25] Effect of boron on the hot ductility of the Nb-microalloyed steel in Austenite region
    Zarandi, Faramarz
    Yue, Steve
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (07): : 2316 - 2320
  • [26] EFFECT OF AUSTENITE PANCAKING ON TEXTURE FORMATION IN A PLAIN CARBON AND A NB MICROALLOYED STEEL
    BUTRONGUILLEN, MP
    JONAS, JJ
    RAY, RK
    [J]. ACTA METALLURGICA ET MATERIALIA, 1994, 42 (11): : 3615 - 3627
  • [27] Effect of boron on the hot ductility of the Nb-microalloyed steel in austenite region
    Faramarz Zarandi
    Steve Yue
    [J]. Metallurgical and Materials Transactions A, 2006, 37 : 2316 - 2320
  • [28] Role of Ti on the Growth of Coarse Columnar Austenite Grain During Nb-Bearing Peritectic Steel Solidification
    An, Jiazhi
    Cai, Zhaozhen
    Zhu, Miaoyong
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2022, 53 (04): : 1540 - 1551
  • [29] Effect of Quenching and Partitioning Process on MA Constituent in Nb-Bearing HSLA Steel
    余伟
    [J]. Journal of Wuhan University of Technology(Materials Science), 2012, 27 (01) : 21 - 26
  • [30] Effect of quenching and partitioning process on MA constituent in Nb-bearing HSLA steel
    Wei Yu
    Tao Chen
    Duotian Jiao
    Huibin Wu
    [J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2012, 27 : 21 - 26