Behavior of vapor/plasma within the keyhole and above the workpiece during CO2 laser penetration welding

被引：4
|
作者：
段爱琴 [1 ]
陈俐 [1 ]
巩水利 [1 ]
机构：
[1] National Key Laboratory for High Density Beam Processing Technology,Beijing Aeronautical Manufacturing Research Institute
来源：
China Welding | 2008年 / 17卷 / 04期
关键词：
CO2 laser welding; vapor/plasma; keyhole; frequency;
D O I：
暂无
中图分类号：
TG456.7 [激光焊];
学科分类号：
摘要：
In this paper,a high-speed camera and an optical emission monitor were used to study the behavior of vapor/plasma during CO2 laser welding of SUS304 stainless steel. Results of optical emission from vapor/plasma show that two characteristic frequency bands exist,100-500Hz and 1500-3500Hz. At the same time,the changing images of vapor/plasma and bottom pool also confirm that there are two different fluctuation frequency bands. One of the frequency bands represents the characteristic of vapor/plasma within the keyhole,and it is within 167-500Hz. Another frequency band is within 1500-3500Hz,and it obviously derives from the shielding gas. Some factors may cause these frequency differences between the keyhole plasma and the shielding gas plasma. One of them is that the vapor/plasma pressure within the keyhole will increase slowly.
引用
收藏
页码：7 / 11
页数：5
相关论文
共 50 条
  • [21] Numerical analysis of the effect of an oscillating metal vapor plume on the keyhole and molten pool behavior during deep penetration laser beam welding
    Yang, Fan
    Meng, Xiangmeng
    Putra, Stephen Nugraha
    Artinov, Antoni
    Bachmann, Marcel
    Rethmeier, Michael
    JOURNAL OF LASER APPLICATIONS, 2023, 35 (04)
  • [22] Effect of activating flux on plasma during CO2 laser welding
    Liu, JH
    Ma, LC
    Zhang, FS
    Lei, DG
    LASERS IN MATERIAL PROCESSING AND MANUFACTURING II, 2005, 5629 : 202 - 208
  • [23] Laser-induced plasma absorption and control for CO2 laser deep-penetration welding
    Tang, Xiahui
    Zhu, Haihong
    Zhu, Guofu
    Li, Shimin
    Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2000, 11 (07): : 741 - 743
  • [24] High-speed simultaneous observation of plasma and keyhole behavior during high power CO2 laser welding:: Effect of shielding gas on porosity formation
    Seto, N
    Katayama, S
    Matsunawa, A
    JOURNAL OF LASER APPLICATIONS, 2000, 12 (06) : 245 - 250
  • [25] High-speed simultaneous observation of plasma and keyhole behavior during high power CO2 laser welding -: Effect of shielding gas on porosity formation
    Seto, N
    Katayama, S
    Matsunawa, A
    ICALEO (R)'99: PROCEEDING OF THE LASER MATERIALS PROCESSING CONFERENCE, VOL 87, PTS 1 AND 2, 2000, 87 : E19 - E27
  • [26] Simulation Study of Keyhole Formation during Laser Deep Penetration Welding
    Wang, R. P.
    Lei, Y. P.
    FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE, PTS 1-4, 2011, 44-47 : 400 - 403
  • [27] Influence of gas jet on weld formation during CO2 laser penetration welding
    Xiao, RS
    Mei, HH
    Zuo, TC
    LASER PROCESSING OF MATERIALS AND INDUSTRIAL APPLICATIONS, 1996, 2888 : 339 - 345
  • [28] Plasma behavior and control with small diameter assisting gas nozzle during CO2 laser welding
    Zhao, Yong
    Zhu, Kaili
    Ma, Qiujie
    Shang, Qing
    Huang, Jian
    Yang, Dongjie
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 237 : 208 - 215
  • [29] On the critical power density of CO2 laser penetration welding
    2000, Beijing Research Institute of Chemical Industry, China (29):
  • [30] Dynamics of keyhole and molten pool in high power CO2 laser welding
    Matsunawa, A
    Seto, N
    Kim, JD
    Mizutani, M
    Katayama, S
    HIGH-POWER LASERS IN MANUFACTURING, 2000, 3888 : 34 - 45
12345