The impact of Al2O3 back interface layer on low-temperature growth of ultrathin Cu(In,Ga)Se2 solar cells

被引：0

作者：

刘杨 ^{[1
]}

刘玮 ^{[1
]}

陈梦馨 ^{[2
]}

史思涵 ^{[1
]}

何志超 ^{[1
]}

巩金龙 ^{[2
]}

王拓 ^{[2
]}

周志强 ^{[1
]}

刘芳芳 ^{[1
]}

孙云 ^{[1
]}

徐术 ^{[3
]}

机构：

[1] Tianjin Key Laboratory of Thin Film Devices and Technology,Institute of Photoelectronic Thin Film Devices and Technology,Nankai University

[2] Key Laboratory for Green Chemical Technology of Ministry of Education,Collaborative Innovation Center of Chemical Science and Engineering (Tianjin),School of Chemical Engineering and Technology,Tianjin University

[3] Davidson School of Chemical Engineering,Purdue University

来源：

Optoelectronics Letters | 2018年 / 14卷 / 05期

基金：

中国国家自然科学基金;

关键词：

Al; Ga;

D O I：

暂无

中图分类号：

TM914.42 [];

学科分类号：

080502 ;

摘要：

With reducing the absorber layer thickness and processing temperature,the recombination at the back interface is severe,which both can result in the decrease of open-circuit voltage and fill factor.In this paper,we prepare Al2O3by atomic layer deposition(ALD),and investigate the effect of its thickness on the performance of Cu(In,Ga)Se2(CIGS)solar cell.The device recombination activation energy(EA)is increased from 1.04 eV to 1.11 eV when the thickness of Al2O3is varied from 0 nm to 1 nm,and the height of back barrier is decreased from 48.54 meV to 38.05 meV.An efficiency of 11.57%is achieved with 0.88-μm-thick CIGS absorber layer.

引用

页码：363 / 366

页数：4

共 50 条

[41] Fast Cu(In,Ga)Se2 precursor growth: Impact on solar cell
Painchaud, T.
Barreau, N.
Arzel, L.
Kessler, J.
[J]. THIN SOLID FILMS, 2011, 519 (21) : 7221 - 7223
[42] Ag incorporation in low-temperature grown Cu(In,Ga)Se2 solar cells using Ag precursor layers
Kim, Kihwan
Park, Joo Wan
Yoo, Jin Su
Cho, Jun-sik
Lee, Hi-Deok
Yun, Jae Ho
[J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2016, 146 : 114 - 120
[43] Effect of different Na supply methods on thin Cu(In,Ga)Se2 solar cells with Al2O3 rear passivation layers
Ledinek, Dorothea
Donzel-Gargand, Olivier
Skold, Markus
Keller, Jan
Edoff, Marika
[J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2018, 187 : 160 - 169
[44] Structure and interface chemistry of MoO3 back contacts in Cu(In,Ga)Se2 thin film solar cells
[J]. 1600, American Institute of Physics Inc. (115):
[45] Incorporation of Ag into Cu(In,Ga)Se2 films in low-temperature process
胡朝静
张运祥
林舒平
程世清
何志超
王超杰
周志强
刘芳芳
孙云
刘玮
[J]. Chinese Optics Letters, 2021, 19 (11) : 154 - 159
[46] Sodium control in Ultrathin Cu(In,Ga)Se2 solar cells on transparent back contact for efficiencies beyond 12%
Li, Yong
Yin, Guanchao
Gao, Yao
Koehler, Tristan
Lucassen, Jan
Schmid, Martina
[J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2021, 223
[47] Structure and interface chemistry of MoO3 back contacts in Cu(In, Ga)Se2 thin film solar cells
Simchi, Hamed
McCandless, Brian E.
Meng, T.
Shafarman, William N.
[J]. JOURNAL OF APPLIED PHYSICS, 2014, 115 (03)
[48] Comparative study of patterned TiO2 and Al2O3 layers as passivated back-contact for ultra-thin Cu(In,Ga)Se2 solar cells
Mollica, F.
Goffard, J.
Jubault, M.
Donsanti, F.
Collin, S.
Cattoni, A.
Lombez, L.
Naghavi, N.
[J]. 2016 IEEE 43RD PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC), 2016, : 2213 - 2217
[49] Incorporation of Ag into Cu(In,Ga)Se2 films in low-temperature process
Hu, Zhaojing
Zhang, Yunxiang
Lin, Shuping
Cheng, Shiqing
He, Zhichao
Wang, Chaojie
Zhou, Zhiqiang
Liu, Fangfang
Sun, Yun
Liu, Wei
[J]. CHINESE OPTICS LETTERS, 2021, 19 (11)
[50] Optimization of (Zn,Sn)O buffer layer in Cu(In,Ga)Se2 based solar cells
Saadat, M.
Amiri, O.
Randar, A.
[J]. SOLAR ENERGY, 2019, 189 : 464 - 470

← 1 2 3 4 5 →